AS-BID

MAY 2026

PROJECT MANUAL

AVIATION TECH PARK - PHASE II - BID PACKAGE 1

SHENANDOAH VALLEY REGIONAL AIRPORT

WEYERS CAVE, VIRGINIA

AIG PROJECT NO. 3-51-0049-053-2025 (DESIGN)

AIG PROJECT NO. 3-51-0049-PENDING (CONSTRUCTION)

PREPARED FOR THE

SHENANDOAH VALLEY REGIONAL AIRPORT COMMISSION

2700 POLO PARKWAY

DELTA PROJECT NO. 23094 MIDLOTHIAN, VIRGINIA 23113

Table of Contents 1

Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

Table of Contents

SECTION I

Invitation for Bids Instructions to Bidders Bid Forms and Supplements

Bidder Checklist Bid Form Bid Schedule Bid Certifications and Disclosures Bid Bond

Contract Forms Construction Agreement Performance Bond Labor and Material Payment Bond Warranty of Construction Lien and Claims Release Certificate of Substantial Completion Certificate of Final Acceptance

Contract Conditions Part 1 – General Contract Provisions

Section 10 Definition of Terms Section 20 Proposal Requirements and Conditions Section 30 Award and Execution of Contract Section 40 Scope of Work Section 50 Control of Work Section 60 Control of Materials Section 70 Legal Regulations and Responsibility to Public Section 80 Execution and Progress Section 90 Measurement and Payment

Federal Contract Provisions for FAA Funded Projects (v. 03/17/26) Davis-Bacon Wage Rates

SECTION II

Special Provisions FAA Specifications

Part 2 – General Construction Items Item C-100 Contractor Quality Control Program (CQCP) Item C-102 Temporary Air and Water Pollution, Soil Erosion, and Siltation Control Item C-105 Mobilization

Table of Contents 2

Item C-110 Method of Estimating Percentage of Material Within Specification Limits (PWL) Part 3 – Sitework

Item P-101 Preparation/Removal of Existing Pavements Item P-152 Excavation, Subgrade, and Embankment Item P-153 Controlled Low-Strength Material (CLSM) Item P-154 Subbase Course

Part 5 – Stabilized Base Courses Item P-304 Cement-Treated Aggregate Base Course (CTB)

Part 6 – Flexible Pavements Item P-401 Asphalt Mix Pavement

Part 7 – Rigid Pavement Item P-501 Cement Concrete Pavement

Part 8 – Surface Treatments Item P-608-R Rapid Cure Seal Coat

Part 9 – Miscellaneous Item P-603 Emulsified Asphalt Tack Coat Item P-605 Joint Sealants for Pavements Item P-620 Runway and Taxiway Marking

Part 10 – Fencing Item F-162 Chain-Link Fence

Part 11 – Drainage Item D-701 Pipe for Storm Drains and Culverts Item D-751 Manholes, Catch Basins, Inlets and Inspection Holes Item D-752 Concrete Culverts, Headwalls, and Miscellaneous Drainage Structures

Part 12 – Turfing Item T-901 Seeding Item T-905 Topsoil Item T-908 Mulching

Part 13 – Lighting Installation Item L-108 Underground Power Cable for Airports Item L-110 Airport Underground Electrical Duct Banks and Conduits Item L-115 Electrical Manholes and Junction Structures Item L-125 Installation of Airport Lighting Systems

Other Specifications Item M-103 Closed Runway or Taxiway Markers Item M-107 Aviation Barricades Item M-150 Miscellaneous Demolition/Removal of Existing Structures Item M-607 Isolation Joint Item M-619 Paint Removal Item R-309 VA Aggregate Base Course Item R-315 VA Asphalt Concrete Pavement Item R-316 VA Hydraulic Cement Concrete Pavement Item R-414 VA Riprap

Table of Contents 3

Item R-505 VA Guardrail Item R-701 VA Traffic Signs

APPENDICES

Appendix A - Other Forms Appendix B - CSPP Appendix C - Geotechnical Report

Page Intentionally Blank

Invitation for Bids 1

Invitation for Bids

Project Name: Aviation Tech Park - Phase II - Bid Package 1

Airport Name: Shenandoah Valley Regional Airport

Airport Location: Weyers Cave, Virginia

The Shenandoah Valley Regional Airport Commission (the "Owner") is requesting Bids for furnishing all labor, materials, and equipment and performing all work for the above-named project.

Sealed Bids will be received by the Owner at the Shenandoah Valley Regional Airport, General Aviation

Terminal Building, 77 Aviation Circle, Weyers Cave, Virginia 24486 or accepted electronically through the Commonwealth of Virginia's electronic procurement system, eVA, at https://eva.virginia.gov no later than 2:00 PM local time on Thursday, June 11, 2026. Received Bids will be opened publicly and read aloud immediately after the submission deadline.

Physical Bid submissions must include the Bidder's name and business address, Project name, and Airport name and location on the lower left corner of the sealed Bid envelope.

Prospective Bidders may obtain information and Bidding Documents for the Project at https://eva.virginia.gov.

Bids must be accompanied by a Bid guarantee in the form of a Bid bond or certified check in the amount of not less than five (5) percent of the total amount Bid. A Contract Performance Bond and a Contract

Payment Bond each equal to 100 percent of the Contract price will be required for the successful Bidder.

No Bid may be withdrawn prior to October 15, 2026.

A pre-bid conference has been scheduled for 10:00 AM local time, Wednesday, June 3, 2026, and will be held in person at the Shenandoah Valley Regional Airport, General Aviation Terminal Building, 77

Aviation Circle, Weyers Cave, Virginia 24486.

This Project is anticipated to be funded in part by the Federal Aviation Administration (FAA). Accordingly, any Contract awarded under this Invitation for Bids will be subject to the applicable federal regulations in effect at the time of the underlying grant award, which include all requirements set out in the Bidding and

Contract Documents which incorporate Federal Contract Provisions that include but are not limited to the

Buy American Preference, Civil Rights Title VI Assurances, Disadvantaged Business Enterprise

Participation, Foreign Trade Restrictions, Davis-Bacon Requirements, Governmentwide Debarment and

Suspension Disclosure, Disclosure of Lobbying, and Procurement of Recovered Materials.

The Owner, in accordance with the provisions of Title VI of the Civil Rights Act of 1964 (42 U.S.C. 2000d to 2000d-4) and the Regulations, hereby notifies all bidders or offerors that it will affirmatively ensure that for any contract entered into pursuant to this advertisement, all businesses will be afforded full and fair opportunity to submit bids in response to this invitation and no businesses will be discriminated against on the grounds of race, color, national origin, creed, sex, age, or disability in consideration for an award.

This Project is subject to the Build America, Buy America Act (BABA). Bidders must certify that all construction materials are manufactured in the U.S.

The successful Bidder shall commence Work with adequate force and equipment on a date to be specified in a written order of the Owner and shall complete Work within the time prescribed in the Contract Documents.

The Owner reserves the right to reject any or all Bids, to waive informalities, and to re-advertise.

Instructions to Bidders 1

Instructions to Bidders

DEFINITIONS

Bid – The Bidder’s formal offer, written and submitted on the prescribed forms, to perform the Work for the Project at a specified cost based on the terms and conditions outlined in the Bidding Documents.

Bidding Documents – The Bidding Documents include the Invitation for Bids (advertisement);

Instructions to Bidders; Bid Forms and Supplements (including but not limited to the Bid Form; Bid

Schedule(s); and all Bid Certifications and Disclosures); Bid bond or other accepted forms of Bid security; proposed Contract Documents; and issued Addenda.

Contract Documents – The Contract Documents include the Bid submitted by the awarded Contractor; the

Project Manual, other than the supplemental resource material included in the Appendices which provide geotechnical and existing conditions information; the Plans; and issued Addenda.

Project Manual – A comprehensive written manual consisting of the documents that define the technical, contractual, and administrative requirements for procuring and constructing the Project. Contents may be bound in one or more volumes.

BIDDING REQUIREMENTS

Refer to Section 20, Proposal Requirements and Conditions, in Part 1 – General Contract Provisions.

PRE-BID CONFERENCE (NON-MANDATORY)

A pre-bid conference for the Aviation Tech Park - Phase II - Bid Package 1 Project will be held to discuss the proposed construction, Project Manual, and Plans. All potential Bidders are strongly encouraged to attend. The pre-bid conference details are as follows:

Date: Wednesday, June 3, 2026

Time: 10:00 AM local time

Format: In-person meeting

Location: Shenandoah Valley Regional Airport

General Aviation Terminal Building

77 Aviation Circle

Weyers Cave, Virginia 24486

BIDDER QUESTIONS

A Bidder that has questions regarding the correct meaning of a Project requirement may submit a written request for interpretation. Questions should be sent via email to the Owner's representative in the

"Attention" line listed below and include the Project name; Airport name and location; Delta Project number; and Bidder's name, contact information, and contact phone number.

Attention: Noah Schuster, P.E.

Via Email: nschuster@deltaairport.com

Project Name: Aviation Tech Park - Phase II - Bid Package 1

Airport Name: Shenandoah Valley Regional Airport

Airport Location: Weyers Cave, Virginia

Delta Project Number: 23094 - SHD

Questions received after 2:00 PM local time on Thursday, June 4, 2026, may not be answered.

Instructions to Bidders 2

QUALIFICATION OF BIDDERS

The Bidder must provide evidence of its competency and financial responsibility to perform the Project

Work. Evidence must be submitted to the Owner with the Bid. Refer to Section 20, paragraph 20-02, Qualification of Bidders, as found in Part 1 – General Contract Provisions for a description of acceptable documentation.

The Owner is subject to public records laws and may be required to release Bid submissions in accordance with the law. Any document submitted as evidence of qualifications that the Bidder deems to be confidential must be clearly identified and marked as such; however, the material may still be subject to public release under applicable law. The Bidder may seek to invoke confidential information protection for submission of any data/material by (1) identifying the data/material in a written description included with the Bid submission, (2) clearly marking the data/material as confidential, and (3) providing a written statement included with the Bid submission detailing the reasons why protection is necessary. The Owner reserves the right to ask for additional clarification prior to establishing protection.

FEDERAL CONTRACT PROVISIONS AND SUBCONTRACTS

In order for the Owner to remain compliant with its Sponsor obligations, federal laws and regulations require the Owner as a recipient of federal assistance to include specific provisions in certain contracts, solicitations, or specifications regardless of whether the Project is federally funded. These clauses are listed in Contract Conditions.

Unless otherwise stated, the Federal Contract Provisions contained within the Bidding and Contract

Documents shall flow down to subcontracts and to sub-tier agreements, and the Contractor shall be responsible for compliance with the Federal Contract Provisions by any subcontractor, lower-tier subcontractor, or service provider.

By signing and submitting a Bid for the Project, the Bidder certifies that it has read, understands, and will comply with all Federal Contract Provisions.

PRIME CONTRACTOR AND SUBCONTRACTOR DATA COLLECTION

The U.S. Department of Transportation, under 49 CFR Part 26 Subpart A, requires the Owner to collect and report certain prime contractor and subcontractor data on its federally assisted projects. The Bidder must submit with its Bid a completed Prime Contractor Data Collection Form for itself and a completed

Subcontractor Data Collection Form for every firm with which it intends to subcontract to perform Work for the Project, regardless of its Disadvantaged Business Enterprise (DBE) status. Both forms are provided herein.

AWARD OF CONTRACT

Refer to Section 30, Award and Execution of Contract, in Part 1 – General Contract Provisions.

OTHER CONTRACT CONDITIONS, INCLUDING INSURANCE REQUIREMENTS

Refer to Section 10, Definition of Terms, and Sections 40 through 90 as found in Part 1 – General

Contract Provisions.

END OF INSTRUCTIONS TO BIDDERS

Bid Forms and Supplements for

Aviation Tech Park - Phase II - Bid Package 1 at

Shenandoah Valley Regional Airport

Bidder Checklist 1

Bidder Checklist

Project Name: Aviation Tech Park - Phase II - Bid Package 1

Airport: Shenandoah Valley Regional Airport

Location: Weyers Cave, Virginia

Bid Submitted to: Shenandoah Valley Regional Airport Commission

The Bidder must complete and include the following items in their Bid submission, or their Bid may be deemed non-responsive. The Bidder Checklist shall be completed and submitted with the Bid. The

Shenandoah Valley Regional Airport Commission reserves the right to accept or reject any and all Bids that are deemed not to be in the best interest of the Shenandoah Valley Regional Airport Commission at its sole discretion.

Required Documentation for Bid Submission

[___] Bid Form

[___] Bid Schedule

[___] Confirm Mobilization price meets Section C-105 requirements

[___] Certification Regarding Federal Contract Provisions

[___] Certifications of Compliance with FAA Buy American Preference

[___] Certifications Regarding Debarment

[___] Certification Regarding Lobbying

[___] Certification Regarding Trade Restriction

[___] Certification of Offeror/Bidder Regarding Tax Delinquency and Felony Convictions

[___] Disadvantaged Business Enterprises Utilization Form

[___] Prime Contractor Data Collection Form

[___] Subcontractor Data Collection Form (one for each subcontractor for each bid alternate, if applicable)

[___] Section 20-02 Bidder Qualification Requirements Checklist and Documentation

[___] State Certifications/Disclosures

[___] Bid Bond

Name of Bidder:

Bid Form 1

Bid Form

Name of Bidder: ____________________________________________________

For Project: Aviation Tech Park - Phase II - Bid Package 1

At Airport: Shenandoah Valley Regional Airport

Weyers Cave, Virginia

Submitted to: Shenandoah Valley Regional Airport Commission

In compliance with the Invitation for Bids, the undersigned hereby proposes and agrees, if this Bid is accepted, to furnish the materials and labor and to perform the Work for the completion of items listed in the Bid Schedule(s) included herein in strict conformance with the terms and conditions of the Bidding

Documents for the consideration of the prices quoted in the following Bid Schedule(s). The undersigned agrees, upon receipt of written notice of Award, that it will execute a Contract in accordance with the Bid as accepted and give the required Contract bonds with good and sufficient surety, within fifteen (15) calendar days after receipt of notice of formal Award of Contract and presentation of the prescribed forms.

It is agreed that the undersigned has informed itself fully in regard to all conditions pertaining to the place where the Work is to be done, that it has examined the Plans and Project Manual furnished prior to the opening of Bids for the Work, and that it has satisfied itself relative to the Work to be performed.

It is agreed that the description under each Bid item, being stated, implies although it does not mention, all incidentals and that the prices stated are intended to cover all such Work, materials, and incidentals as constitute the Contractors obligations as described in the Bidding Documents, and any details not specifically mentioned, but evidently included in the Contract shall be compensated for in the item which most logically includes it.

It is understood that this Bid is submitted for the purpose of obtaining the Work included in the subject

Project at the Airport. Said Work includes the following general items:

● 100' expansion of the commercial apron

● Construction of a service road

● Installation of new airfield security fence

● Stormwater basin modifications

Said Work is described in the Project Bidding Documents which also include the place, date, and time of opening Bids.

It is understood that separate Contracts on individual Bid Schedules of Work may be awarded, when included in the Bid Documents.

It is understood that all workmanship and materials under all items of Work are guaranteed for one year from the date of final acceptance.

Bid Form 2

It is understood that the Owner reserves the right to accept or reject any or all Bids and waive informalities.

It is understood that the quantities of Work to be done are approximate only and are intended principally to serve as a guide in evaluation of Bids, with the right reserved by the Owner to delete minor Bid items.

The undersigned agrees that, if awarded the Contract, it will commence the Work not later than ten (10) days from receipt of the Notice to Proceed and that it will complete the Work within the time stipulated in the Bidding Documents.

It is understood that for each calendar day that any Work remains uncompleted after the Contract Time

(including all extensions and adjustments as provided in Section 80, paragraph 80-07, Determination and

Extension of Contract Time) liquidated damages will be assessed in accordance with the Bidding

Documents and will be deducted from any money due or to become due to the Contractor or its Surety.

Such deducted sums shall not be deducted as a penalty but shall be considered as liquidation of a reasonable portion of damages that will be incurred by the Owner should the Contractor fail to complete the Work in the time provided in its contract.

Enclosed is security as required, consisting of a Bid bond or certified check payable to the Shenandoah

Valley Regional Airport Commission, in the amount of $_______________.

This amount equals five (5) percent of the total amount Bid submitted by the Contractor.

It is understood that this Project is funded by federal, state, and local monies, and the Contractor shall be subject to all laws and regulations applicable to recipients of such funds.

The Contractor shall be a licensed Contractor registered with the Commonwealth of Virginia, shall list its registration number at the end of the Bid in the designated location, and shall enclose a copy of its licensing certificate.

The undersigned hereby acknowledges the receipt of the following Addenda to the Contract Documents.

Addendum Number Addendum Date

[SIGNATURES FOLLOW ON THE NEXT PAGE]

Bid Form 3

Name of Bidder: _______________________________________________________

Physical Business Address: _______________________________________________________

(No P.O. Boxes)

Email Address: _______________________________________________________

Signature: _______________________________________________________

Name: (type or print) _______________________________________________________

Official Title: _______________________________________________________

Date: _______________________________________________________

Telephone No.: (______) _______________________________________________

Virginia Contractor's License Number: _____________________________________

Bid Schedule

BID SCHEDULE

Date:

UNIT PRICES EXTENDED

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

C-100 1 LS

PER LUMP SUM

C-102 1,500 LF

PER LINEAR FOOT

C-102 2 EA

PER EACH

C-102 1 EA

PER EACH

C-102 15 EA

PER EACH

C-102 2 EA

PER EACH

C-102 1 EA

PER EACH

C-102 700 LF

PER LINEAR FOOT

C-102 600 SY

PER SQUARE YARD

C-102 2,500 SY

PER SQUARE YARD

INLET PROTECTION

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

CONTRACTOR QUALITY CONTROL PROGRAM (CQCP)

INSTALLATION AND REMOVAL OF SILT FENCE

STONE CONSTRUCTION ENTRANCE

TEMPORARY SEDIMENT TRAP

TEMPORARY ROCK CHECK DAM

CULVERT INLET PROTECTION

TEMPORARY DIVERSION DIKE

SOIL STABILIZATION BLANKET - TREATMENT 1

SOIL STABILIZATION BLANKET - TREATMENT 2

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

BLANK

UNIT PRICES EXTENDED

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

C-105 1 LS

PER LUMP SUM

P-101 360 SY

PER SQUARE YARD

P-101 50 SY

PER SQUARE YARD

P-101 3,000 LF

PER LINEAR FOOT

P-101 1,160 SY

PER SQUARE YARD

P-101 3,050 SY

PER SQUARE YARD

P-152 6,000 CY

PER CUBIC YARD

P-152 900 CY

PER CUBIC YARD

P-154 1,500 CY

PER CUBIC YARD

P-154 1,000 SY

PER SQUARE YARD

SUBBASE COURSE

SEPARATION GEOTEXTILE

MUCK EXCAVATION

MOBILIZATION

BITUMINOUS PAVEMENT REMOVAL

CONCRETE PAVEMENT REMOVAL

CRACK REPAIR (TYPE A)

COLD MILLING (0.5" DEPTH)

COLD MILLING (2" DEPTH)

UNCLASSIFIED EXCAVATION

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

P-304 3,500 SY

PER SQUARE YARD

P-401 1,400 TN

PER TON

P-501 675 SY

PER SQUARE YARD

P-608-R 26,150 SY

PER SQUARE YARD

P-603 1,100 GL

PER GALLON

P-605 830 LF

PER LINEAR FOOT

P-620 3,400 SF

PER SQUARE FOOT

P-620 3,400 SF

PER SQUARE FOOT

P-620 900 SF

PER SQUARE FOOT

P-620 900 SF

PER SQUARE FOOT

JOINT SEALING FILLER

MARKING (INITIAL YELLOW)

MARKING (PERMANENT YELLOW)

MARKING (INITIAL WHITE)

MARKING (PERMANENT WHITE)

EMULSIFIED ASPHALT TACK COAT

CEMENT-TREATED BASE COURSE (6")

ASPHALT SURFACE COURSE

CONCRETE PAVEMENT (15")

ASPHALT SURFACE TREATMENT

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

P-620 900 SF

PER SQUARE FOOT

P-620 900 SF

PER SQUARE FOOT

P-620 5,100 SF

PER SQUARE FOOT

P-620 1 LS

PER LUMP SUM

F-162 1,100 LF

PER LINEAR FOOT

F-162 870 LF

PER LINEAR FOOT

F-162 1 EA

PER EACH

F-162 1 EA

PER EACH

D-701 48 LF

PER LINEAR FOOT

D-701 180 LF

PER LINEAR FOOT

8' TEMPORARY GALVANIZED CHAIN-LINK FENCE

8' X 30' AUTOMATIC SLIDING VEHICLE GATE

CARD READER ISLAND

18" RCP, CLASS III

24" RCP, CLASS III

MARKING (INITIAL RED)

MARKING (PERMANENT RED)

MARKING (PERMANENT BLACK)

REFLECTIVE MEDIA

8' PERMANANT GALVANIZED CHAIN-LINK FENCE

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

D-751 1 EA

PER EACH

D-751 1 EA

PER EACH

D-752 1 EA

PER EACH

D-752 1 EA

PER EACH

D-752 1 EA

PER EACH

T-901 5 AC

PER ACRE

T-908 5 AC

PER ACRE

L-108 800 LF

PER LINEAR FOOT

L-108 1,350 LF

PER LINEAR FOOT

L-108 800 LF

PER LINEAR FOOT

SEEDING

MULCHING

NO. 8 AWG, 5KV, L-824 TYPE C CABLE, INSTALLED IN TRENCH, DUCT BANK OR

CONDUIT

NO. 6 AWG SOLID BARE COPPER COUNTERPOISE WIRE, INSTALLED ABOVE THE

DUCT BANK OR CONDUIT, INCLUDING CONNECTIONS/TERMINATIONS

FIBER OPTIC

DROP INLET, VDOT STD. DI-1

MANHOLE, VDOT STD. MH-1

STORMWATER MANAGEMENT STRUCTURE

ADJUST EXISTING DRAINAGE STRUCTURE

24" END SECTION, VDOT STD. ES-1

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

L-108 600 LF

PER LINEAR FOOT

L-110 62 LF

PER LINEAR FOOT

L-110 170 LF

PER LINEAR FOOT

L-110 720 LF

PER LINEAR FOOT

L-110 360 LF

PER LINEAR FOOT

L-115 5 EA

PER EACH

L-125 1 EA

PER EACH

L-125 6 EA

PER EACH

M-103 2 EA

PER EACH

M-107 1,000 LF

PER LINEAR FOOT

ELECTRICAL JUNCTION STRUCTURE

L-861T(L) RED BASE MOUNTED MITL (LED) (RED)

RELOCATED L-861T(L) BASE MOUNTED MITL (LED)

CLOSED TAXIWAY MARKER (CONTRACTOR FURNISHED)

AVIATION BARRICADES (CONTRACTOR FURNISHED)

FLOOD LIGHT CABLE

CONCRETE ENCASED DUCT BANK, 1 WAY - 2" PVC CONDUIT

CONCRETE ENCASED DUCT BANK, 2 WAY - 2" PVC CONDUIT

NON-ENCASED ELECTRICAL CONDUIT, 1 WAY - 2" PVC CONDUIT

NON-ENCASED ELECTRICAL CONDUIT, 2 WAY - 2" PVC CONDUIT

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

M-150 900 LF

PER LINEAR FOOT

M-150 300 LF

PER LINEAR FOOT

M-150 4 EA

PER EACH

M-150 2 EA

PER EACH

M-150 1,560 LF

PER LINEAR FOOT

M-150 1 EA

PER EACH

M-607 480 LF

PER LINEAR FOOT

M-619 570 SF

PER SQUARE FOOT

R-309 450 CY

PER CUBIC YARD

R-315 350 TN

PER TON

REMOVE STORMWATER BASIN STRUCTURE

ISOLATION JOINT

PAINT REMOVAL (95-100% LEVEL)

AGGREGATE BASE COURSE

ASPHALT CONCRETE BASE COURSE, TYPE BM-25

REMOVE CONDUIT AND CABLE

REMOVE EXISTING DUCT BANK

REMOVE ELECTRICAL JUNCTION STRUCTURE

REMOVE EXISTING FLOOD LIGHT HEAD

REMOVE FENCE

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE ONE (1)

APPROX.

QUANTITY

R-315 400 TN

PER TON

R-414 25 SY

PER SQUARE YARD

R-414 250 SY

PER SQUARE YARD

R-505 515 LF

PER LINEAR FOOT

R-505 4 EA

PER EACH

R-701 2 EA

PER EACH

32.SP 300 CY

PER CUBIC YARD

39.SP 1 LS

PER LUMP SUM

40.SP 1 LS

PER LUMP SUM

Total Bid Amount $

SP-1 Non-AIP Insurance Allowance $

STOP SIGN (R1-1)

SUBGRADE REPAIR UNDERCUT

RELOCATED AIRFIELD POWER RECEPTACLES

FLOOD LIGHTS

ASPHALT CONCRETE, TYPE SM-12.5A

RIPRAP, CLASS I

RIPRAP, CLASS A1

GUARDRAIL (STANDARD)

GUARDRAIL TERMINAL

Bid Schedule - Alternate One (1) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

Date:

UNIT PRICES EXTENDED

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

C-100 1 LS

PER LUMP SUM

C-102 1,500 LF

PER LINEAR FOOT

C-102 2 EA

PER EACH

C-102 1 EA

PER EACH

C-102 15 EA

PER EACH

C-102 2 EA

PER EACH

C-102 1 EA

PER EACH

C-102 700 LF

PER LINEAR FOOT

C-102 600 SY

PER SQUARE YARD

C-102 2,500 SY

PER SQUARE YARD

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

STONE CONSTRUCTION ENTRANCE

TEMPORARY SEDIMENT TRAP

CONTRACTOR QUALITY CONTROL PROGRAM (CQCP)

INSTALLATION AND REMOVAL OF SILT FENCE

CULVERT INLET PROTECTION

TEMPORARY DIVERSION DIKE

TEMPORARY ROCK CHECK DAM

INLET PROTECTION

SOIL STABILIZATION BLANKET - TREATMENT 1

SOIL STABILIZATION BLANKET - TREATMENT 2

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

C-105 1 LS

PER LUMP SUM

P-101 360 SY

PER SQUARE YARD

P-101 50 SY

PER SQUARE YARD

P-101 3,000 LF

PER LINEAR FOOT

P-101 1,160 SY

PER SQUARE YARD

P-101 3,050 SY

PER SQUARE YARD

P-152 6,000 CY

PER CUBIC YARD

P-152 900 CY

PER CUBIC YARD

P-154 1,500 CY

PER CUBIC YARD

P-154 1,000 SY

PER SQUARE YARD

MOBILIZATION

BITUMINOUS PAVEMENT REMOVAL

COLD MILLING (0.5" DEPTH)

COLD MILLING (2" DEPTH)

CONCRETE PAVEMENT REMOVAL

CRACK REPAIR (TYPE A)

SUBBASE COURSE

SEPARATION GEOTEXTILE

UNCLASSIFIED EXCAVATION

MUCK EXCAVATION

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

P-304 3,500 SY

PER SQUARE YARD

P-401 1,400 TN

PER TON

P-501 675 SY

PER SQUARE YARD

P-608-R 12,070 SY

PER SQUARE YARD

P-603 1,100 GL

PER GALLON

P-605 830 LF

PER LINEAR FOOT

P-620 3,000 SF

PER SQUARE FOOT

P-620 3,000 SF

PER SQUARE FOOT

P-620 800 SF

PER SQUARE FOOT

P-620 800 SF

PER SQUARE FOOT

CONCRETE PAVEMENT (15")

ASPHALT SURFACE TREATMENT

CEMENT-TREATED BASE COURSE (6")

ASPHALT SURFACE COURSE

MARKING (INITIAL YELLOW)

MARKING (PERMANENT YELLOW)

EMULSIFIED ASPHALT TACK COAT

JOINT SEALING FILLER

MARKING (INITIAL WHITE)

MARKING (PERMANENT WHITE)

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

P-620 870 SF

PER SQUARE FOOT

P-620 870 SF

PER SQUARE FOOT

P-620 4,400 SF

PER SQUARE FOOT

P-620 1 LS

PER LUMP SUM

F-162 1,100 LF

PER LINEAR FOOT

F-162 870 LF

PER LINEAR FOOT

F-162 1 EA

PER EACH

F-162 1 EA

PER EACH

D-701 48 LF

PER LINEAR FOOT

D-701 180 LF

PER LINEAR FOOT

MARKING (INITIAL RED)

MARKING (PERMANENT RED)

8' PERMANANT GALVANIZED CHAIN-LINK FENCE

8' TEMPORARY GALVANIZED CHAIN-LINK FENCE

MARKING (PERMANENT BLACK)

REFLECTIVE MEDIA

18" RCP, CLASS III

24" RCP, CLASS III

8' X 30' AUTOMATIC SLIDING VEHICLE GATE

CARD READER ISLAND

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

D-751 1 EA

PER EACH

D-751 1 EA

PER EACH

D-752 1 EA

PER EACH

D-752 1 EA

PER EACH

D-752 1 EA

PER EACH

T-901 5 AC

PER ACRE

T-908 5 AC

PER ACRE

L-108 800 LF

PER LINEAR FOOT

L-108 1,350 LF

PER LINEAR FOOT

L-108 800 LF

PER LINEAR FOOT

STORMWATER MANAGEMENT STRUCTURE

ADJUST EXISTING DRAINAGE STRUCTURE

DROP INLET, VDOT STD. DI-1

MANHOLE, VDOT STD. MH-1

MULCHING

NO. 8 AWG, 5KV, L-824 TYPE C CABLE, INSTALLED IN TRENCH, DUCT BANK OR

CONDUIT

24" END SECTION, VDOT STD. ES-1

SEEDING

NO. 6 AWG SOLID BARE COPPER COUNTERPOISE WIRE, INSTALLED ABOVE THE

DUCT BANK OR CONDUIT, INCLUDING CONNECTIONS/TERMINATIONS

FIBER OPTIC

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

L-108 600 LF

PER LINEAR FOOT

L-110 62 LF

PER LINEAR FOOT

L-110 170 LF

PER LINEAR FOOT

L-110 720 LF

PER LINEAR FOOT

L-110 360 LF

PER LINEAR FOOT

L-115 5 EA

PER EACH

L-125 1 EA

PER EACH

L-125 6 EA

PER EACH

M-103 2 EA

PER EACH

M-107 1,000 LF

PER LINEAR FOOT

FLOOD LIGHT CABLE

CONCRETE ENCASED DUCT BANK, 1 WAY - 2" PVC CONDUIT

NON-ENCASED ELECTRICAL CONDUIT, 2 WAY - 2" PVC CONDUIT

ELECTRICAL JUNCTION STRUCTURE

CONCRETE ENCASED DUCT BANK, 2 WAY - 2" PVC CONDUIT

NON-ENCASED ELECTRICAL CONDUIT, 1 WAY - 2" PVC CONDUIT

CLOSED TAXIWAY MARKER (CONTRACTOR FURNISHED)

AVIATION BARRICADES (CONTRACTOR FURNISHED)

L-861T(L) RED BASE MOUNTED MITL (LED)

RELOCATED L-861T(L) BASE MOUNTED MITL (LED)

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

M-150 900 LF

PER LINEAR FOOT

M-150 300 LF

PER LINEAR FOOT

M-150 4 EA

PER EACH

M-150 2 EA

PER EACH

M-150 1,560 LF

PER LINEAR FOOT

M-150 1 EA

PER EACH

M-607 480 LF

PER LINEAR FOOT

M-619 330 SF

PER SQUARE FOOT

R-309 450 CY

PER CUBIC YARD

R-315 350 TN

PER TON

REMOVE ELECTRICAL JUNCTION STRUCTURE

REMOVE EXISTING FLOOD LIGHT HEAD

REMOVE CONDUIT AND CABLE

REMOVE EXISTING DUCT BANK

ISOLATION JOINT

PAINT REMOVAL (95-100% LEVEL)

REMOVE FENCE

REMOVE STORMWATER BASIN STRUCTURE

AGGREGATE BASE COURSE

ASPHALT CONCRETE BASE COURSE, TYPE BM-25

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

ITEM ITEM WITH UNIT PRICE IN FIGURES TOTAL

NO. WRITTEN IN WORDS --------------------- ---------------------

DOLLARS DOLLARS

CENTS CENTS

BID ALTERNATE TWO (2)

APPROX.

QUANTITY

R-315 400 TN

PER TON

R-414 25 SY

PER SQUARE YARD

R-414 250 SY

PER SQUARE YARD

R-505 515 LF

PER LINEAR FOOT

R-505 4 EA

PER EACH

R-701 2 EA

PER EACH

32.SP 300 CY

PER CUBIC YARD

39.SP 1 LS

PER LUMP SUM

40.SP 1 LS

PER LUMP SUM

Total Bid Amount $

SP-1 Non-AIP Insurance Allowance $

ASPHALT CONCRETE, TYPE SM-12.5A

RIPRAP, CLASS I

GUARDRAIL TERMINAL

STOP SIGN (R1-1)

RIPRAP, CLASS A1

GUARDRAIL (STANDARD)

FLOOD LIGHTS

SUBGRADE REPAIR UNDERCUT

RELOCATED AIRFIELD POWER RECEPTACLES

Bid Schedule - Alternate Two (2) Aviation Tech Park - Phase II - Bid Package 1 | 23094 - SHD

Bid Certifications and Disclosures

Certification Regarding Federal Contract Provisions for FAA Funded Projects (v. 03/17/26) 1 Aviation Tech Park - Phase II - BP 1 | 23094 - SHD

Certification Regarding Federal Contract Provisions for FAA Funded Projects (v. 03/17/26)

By signing and submitting a Bid for the Project, the Bidder certifies that it has read, understands, and will comply with all Federal Contract Provisions contained within the Bidding and Contract Documents and as listed by reference and qualified below:

All Contracts Regardless of Funding Source Civil Rights – General Provisions

Civil Rights – Title VI Assurances

All FAA Funded Contracts Access to Records and Reports

Buy American Preference

Disadvantaged Business Enterprise

Domestic Preferences for Procurements

Federal Fair Labor Standards Act (Minimum Wage)

Foreign Trade Restriction

Occupational Safety and Health Act

Prohibition on Certain Telecommunications and Video Surveillance Services or Equipment

Prohibition of Covered Unmanned Aircraft Systems (UAS)

Rights to Inventions

Seismic Safety

Tax Delinquency and Felony Convictions

Veteran’s Preference

Additional Provisions for FAA Funded Contracts that are $2,000 and greater Copeland Anti-Kickback Act

Davis-Bacon Requirements

Additional Provisions for FAA Funded Contracts that are $10,000 and greater Procurement of Recovered Materials

Termination of Contract

Additional Provisions for FAA Funded Contracts that are $15,000 and greater Texting Messaging While Driving

Additional Provisions for FAA Funded Contracts that are $25,000 and greater Debarment and Suspension

Certification Regarding Federal Contract Provisions for FAA Funded Projects (v. 03/17/26) 2

Additional Provisions for FAA Funded Contracts that are $100,000 and greater Breach of Contract

Clean Air and Water Pollution Controls

Contract Work Hours and Safety Standards

Lobbying Federal Employees

Signature:

Name: (type or print)

Official Title: Date:

Certification of Compliance with FAA Buy American Preference (Construction) 1

Certification of Compliance with FAA Buy American Preference (Construction)

As a matter of bid responsiveness, the bidder or offeror must complete, sign, date, and submit this certification statement with its proposal. The bidder or offeror must indicate how it intends to comply with 49 U.S.C. § 50101, BABA, and other Made in America Laws, U.S. statutes, guidance, and FAA policies by selecting one of the following certification statements. These statements are mutually exclusive. Bidder must SELECT ONE certification statement (not both) by inserting a checkmark ( √ ) or the letter “X”.

[___] Bidder or offeror hereby certifies that it will comply with 49 U.S.C. § 50101, BABA, and other related U.S. statutes, guidance, and policies of the FAA by:

a) Only installing iron, steel, and manufactured products produced in the United States;

b) Only installing construction materials defined as: an article, material, or supply – other than an item of primarily iron or steel; a manufactured product; cement and cementitious materials; aggregates such as stone, sand, or gravel; or aggregate binding agents or additives that are or consist primarily of non-ferrous metals; plastic and polymer-based products (including polyvinylchloride, composite building materials, and polymers used in fiber optic cables); glass (including optic glass); lumber or drywall that have been manufactured in the United States.

c) Installing manufactured products for which the Federal Aviation Administration (FAA) has issued a waiver as indicated by inclusion on the current FAA Nationwide Buy American Waivers Issued listing; or

d) Installing products listed as an Excepted Article, Material or Supply in Federal Acquisition Regulation Subpart 25.108.

By selecting this certification statement, the bidder or offeror agrees:

a) To provide to the Airport Sponsor or the FAA evidence that documents the source and origin of the iron, steel, and/or manufactured product.

b) To faithfully comply with providing U.S. domestic products.

c) To refrain from seeking a waiver request after establishment of the contract, unless extenuating circumstances emerge that the FAA determines justified.

d) Certify that all construction materials used in the project are manufactured in the U.S.

[___] Bidder or offeror hereby certifies it cannot comply with the 100 percent Buy American

Preferences of 49 U.S.C. § 50101(a) but may qualify for a Type 3 or Type 4 waiver under 49 U.S.C. § 50101(b). By selecting this certification statement, the apparent bidder or offeror with the apparent low bid agrees:

a) To the submit to the Airport Sponsor or FAA within 15 calendar days of being selected as the responsive bidder, a formal waiver request and required documentation that supports the type of waiver being requested.

b) That failure to submit the required documentation within the specified timeframe is cause for a non-responsive determination that may result in rejection of the proposal.

c) To faithfully comply with providing U.S. domestic products at or above the approved U.S.

domestic content percentage as approved by the FAA.

d) To furnish U.S. domestic product for any waiver request that the FAA rejects.

e) To refrain from seeking a waiver request after establishment of the contract, unless extenuating circumstances emerge that the FAA determines justified.

Certification of Compliance with FAA Buy American Preference (Construction) 2

REQUIRED DOCUMENTATION

Type 2 Waiver (Nonavailability) – The iron, steel, manufactured goods or construction materials or manufactured goods are not available in sufficient quantity or quality in the United States. The required documentation for the Nonavailability waiver is:

a) Completed Content Percentage Worksheet and Final Assembly Questionnaire

b) Record of thorough market research, consideration where appropriate of qualifying alternate items, products, or materials including;

c) A description of the market research activities and methods used to identify domestically manufactured items capable of satisfying the requirement, including the timing of the research and conclusions reached on the availability of sources.

Type 3 Waiver – The cost of components and subcomponents produced in the United States is more than 60 percent of the cost of all components and subcomponents of the “facility/project.” The required documentation for a Type 3 waiver is:

a) Completed Content Percentage Worksheet and Final Assembly Questionnaire including;

b) Listing of all manufactured products that are not comprised of 100 percent U.S. domestic content

(excludes products listed on the FAA Nationwide Buy American Waivers Issued listing and products excluded by Federal Acquisition Regulation Subpart 25.108; products of unknown origin must be considered as non-domestic products in their entirety).

c) Cost of non-domestic components and subcomponents, excluding labor costs associated with final assembly and installation at project location.

d) Percentage of non-domestic component and subcomponent cost as compared to total “facility” component and subcomponent costs, excluding labor costs associated with final assembly and installation at project location.

Type 4 Waiver (Unreasonable Costs) – Applying this provision for iron, steel, manufactured goods or construction materials would increase the cost of the overall project by more than 25 percent. The required documentation for this waiver is:

a) A completed Content Percentage Worksheet and Final Assembly Questionnaire from

b) At minimum two comparable equal bids and/or offers;

c) Receipt or record that demonstrates that supplier scouting called for in Executive Order 14005, indicates that no domestic source exists for the project and/or component;

d) Completed waiver applications for each comparable bid and/or offer.

FALSE STATEMENTS

Per 49 U.S.C. § 47126, this certification concerns a matter within the jurisdiction of the Federal Aviation Administration and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code.

Date Signature

Company Name Title

Certification of Compliance with FAA Buy American Preference (Building/Equipment) 1

Certification of Compliance with FAA Buy American Preference (Building/Equipment)

As a matter of bid responsiveness, the bidder or offeror must complete, sign, date, and submit this certification statement with its proposal. The bidder or offeror must indicate how it intends to comply with 49 U.S.C. § 50101, BABA, and other Made in America Laws, U.S. statutes, guidance, and FAA policies by selecting one of the following certification statements. These statements are mutually exclusive. Bidder must SELECT ONE certification statement (not both) by inserting a checkmark ( √ ) or the letter “X”.

[___] Bidder or offeror hereby certifies that it will comply with 49 U.S.C. § 50101, BABA, and other related U.S. statutes, guidance, and policies of the FAA by:

a) Only installing steel and manufactured products produced in the United States;

b) Only installing construction materials defined as: an article, material, or supply – other than an item of primarily iron or steel; a manufactured product; cement and cementitious materials; aggregates such as stone, sand, or gravel; or aggregate binding agents or additives that are or consist primarily of non-ferrous metals; plastic and polymer-based products (including polyvinylchloride, composite building materials, and polymers used in fiber optic cables); glass (including optic glass); lumber or drywall that have been manufactured in the United States.

c) Installing manufactured products for which the Federal Aviation Administration (FAA) has issued a waiver as indicated by inclusion on the current FAA Nationwide Buy American Waivers Issued listing; or

d) Installing products listed as an Excepted Article, Material or Supply in Federal Acquisition Regulation Subpart 25.108.

By selecting this certification statement, the bidder or offeror agrees:

a) To provide to the Airport Sponsor or FAA evidence that documents the source and origin of the steel and manufactured product.

b) To faithfully comply with providing U.S. domestic product.

c) To furnish U.S. domestic product for any waiver request that the FAA rejects.

d) To refrain from seeking a waiver request after establishment of the contract, unless extenuating circumstances emerge that the FAA determines justified.

[___] Bidder or offeror hereby certifies it cannot comply with the 100 percent Buy American

Preferences of 49 U.S.C. § 50101(a) but may qualify for a Type 3 waiver under 49 U.S.C. § 50101(b). By selecting this certification statement, the apparent bidder or offeror with the apparent low bid agrees:

a) To submit to the Airport Sponsor or FAA within 15 calendar days of being selected as the responsive bidder, a formal waiver request and required documentation that supports the type of waiver being requested.

b) That failure to submit the required documentation within the specified timeframe is cause for a non-responsive determination that may result in rejection of the proposal.

c) To faithfully comply with providing U.S. domestic products at or above the approved U.S.

domestic content percentage as approved by the FAA.

d) To refrain from seeking a waiver request after establishment of the contract, unless extenuating circumstances emerge that the FAA determines justified.

Certification of Compliance with FAA Buy American Preference (Building/Equipment) 2

REQUIRED DOCUMENTATION

Type 2 Waiver (Nonavailability) – The iron, steel, manufactured goods, or construction materials are not available in sufficient quantity or quality in the United States. The required documentation for the Nonavailability waiver is:

a) Completed Content Percentage Worksheet and Final Assembly Questionnaire

b) Record of thorough market research, consideration where appropriate of qualifying alternate items, products, or materials including;

c) A description of the market research activities and methods used to identify domestically manufactured items capable of satisfying the requirement, including the timing of the research and conclusions reached on the availability of sources.

Type 3 Waiver – The cost of the item components and subcomponents produced in the United States is more that 60 percent of the cost of all components and subcomponents of the “item”. The required documentation for a Type 3 waiver is:

a) Completed Content Percentage Worksheet and Final Assembly Questionnaire including;

b) Listing of all product components and subcomponents that are not comprised of 100 percent U.S.

domestic content (Excludes products listed on the FAA Nationwide Buy American Waivers Issued listing and products excluded by Federal Acquisition Regulation Subpart 25.108; products of unknown origin must be considered as non-domestic products in their entirety).

c) Cost of non-domestic components and subcomponents, excluding labor costs associated with final assembly at place of manufacture.

d) Percentage of non-domestic component and subcomponent cost as compared to total “item” component and subcomponent costs, excluding labor costs associated with final assembly at place of manufacture.

Type 4 Waiver (Unreasonable Costs) – Applying this provision for iron, steel, manufactured goods or construction materials, would increase the cost of the overall project by more than 25 percent. The required documentation for this waiver is:

a) Completed Content Percentage Worksheet and Final Assembly Questionnaire from

b) At minimum two comparable equal bidders and/or offerors;

c) Receipt or record that demonstrates that supplier scouting called for in Executive Order 14005, indicates that no domestic source exists for the project and/or component;

d) Completed waiver applications for each comparable bid and/or offer

FALSE STATEMENTS

Per 49 U.S.C. § 47126, this certification concerns a matter within the jurisdiction of the Federal Aviation Administration and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code.

Date Signature

Company Name Title

Certifications Regarding Debarment 1

Certifications Regarding Debarment

CERTIFICATION OF OFFEROR/BIDDER REGARDING DEBARMENT

(2 CFR Part 180 (subpart B); 2 CFR Part 200, Appendix II(H); 2 CFR Part 1200; DOT Order 4200.5;

Executive Orders 12549 and 12689)

By submitting a bid/proposal under this solicitation, the bidder or offeror certifies that neither it nor its principals are presently debarred or suspended by any Federal department or agency from participation in this transaction.

CERTIFICATION OF LOWER TIER CONTRACTORS REGARDING DEBARMENT

The successful bidder, by administering each lower tier subcontract that exceeds $25,000 as a “covered transaction,” must confirm each lower tier participant of a “covered transaction” under the project is not presently debarred or otherwise disqualified from participation in this federally assisted project. The successful bidder will accomplish this by:

(1) Checking the System for Award Management at website: http://www.sam.gov.

(2) Collecting a certification statement similar to the Certification of Offeror/Bidder Regarding

Debarment, above.

(3) Inserting a clause or condition in the covered transaction with the lower tier contract.

If the Federal Aviation Administration later determines that a lower tier participant failed to disclose to a higher tier participant that it was excluded or disqualified at the time it entered the covered transaction, the FAA may pursue any available remedies, including suspension and debarment of the non-compliant participant.

Certification Regarding Lobbying 1

Certification Regarding Lobbying

(31 U.S.C. Part 1352 – Byrd Anti-Lobbying Amendment; 2 CFR Part 200, Appendix II(I); 49 CFR Part 20, Appendix A)

The Bidder or Offeror certifies by signing and submitting this bid or proposal, to the best of his or her knowledge and belief, that:

(1) No Federal appropriated funds have been paid or will be paid, by or on behalf of the Bidder or Offeror, to any person for influencing or attempting to influence an officer or employee of an agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with the awarding of any Federal contract, the making of any Federal grant, the making of any Federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any Federal contract, grant, loan, or cooperative agreement.

(2) If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with this Federal contract, grant, loan, or cooperative agreement, the undersigned shall complete and submit Standard Form-LLL, “Disclosure of Lobbying Activities,” in accordance with its instructions.

(3) The undersigned shall require that the language of this certification be included in the award documents for all sub-awards at all tiers (including subcontracts, subgrants, and contracts under grants, loans, and cooperative agreements) and that all sub-recipients shall certify and disclose accordingly.

This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Submission of this certification is a prerequisite for making or entering into this transaction imposed by 31 U.S.C. § 1352. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure.

Certification Regarding Trade Restriction 1

Certification Regarding Trade Restriction

(49 U.S.C. Part 50104; 49 CFR Part 30)

By submission of an offer, the Offeror certifies that with respect to this solicitation and any resultant contract, the Offeror –

(1) is not owned or controlled by one or more citizens of a foreign country included in the list of countries that discriminate against U.S. firms as published by the Office of the United States Trade Representative (USTR);

(2) has not knowingly entered into any contract or subcontract for this project with a person that is a…