221006-RIB-Plumbing Piping Specialties-12-24-2025.pdf

25-388 CBI HVAC and Lighting Upgrade 221006 - 1 Plumbing Piping Specialties

SECTION 221006

PLUMBING PIPING SPECIALTIES

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Drains.

B. Cleanouts.

C. Hose bibbs.

D. Hydrants.

E. Washing machine outlet boxes.

F. Ice maker outlet boxes.

G. Backwater valves.

H. Backflow preventers.

I. Double check valve assemblies.

J. Water hammer arrestors.

K. Sumps.

L. Sanitary waste interceptors.

M. Mixing valves.

N. Floor drain trap seals.

O. Catch basins and manholes.

1.02 REFERENCE STANDARDS

A. ASME A112.6.3 - Floor Drains; 2022.

B. ASME A112.6.4 - Roof, Deck, and Balcony Drains; 2022.

C. ASSE 1011 - Performance Requirements for Hose Connection Vacuum Breakers; 2023.

D. ASSE 1012 - Performance Requirements for Backflow Preventers with an Intermediate

Atmospheric Vent; 2021.

E. ASSE 1013 - Performance Requirements for Reduced Pressure Principle Backflow Prevention

Assemblies; 2021.

F. ASSE 1016 - Performance Requirements for Automatic Compensating Valves for Individual

Showers and Tub/Shower Combinations; 2017 (Reaffirmed 2021).

G. ASSE 1017 - Performance Requirements for Temperature Actuated Mixing Valves for Hot

Water Distribution Systems; 2023.

H. ASSE 1019 - Performance Requirements for Wall Hydrant with Backflow Protection and Freeze

Resistance; 2023.

I. DIN 19580 - Drainage Channels for Vehicular and Pedestrian Areas - Durability, Mass Per Unit

Area and Evaluation of Conformity; 2010.

J. NSF 2 - Food Equipment; 2022.

K. NSF 61 - Drinking Water System Components - Health Effects; 2024.

L. NSF 372 - Drinking Water System Components - Lead Content; 2024.

M. PDI-WH 201 - Water Hammer Arresters; 2017.

1.03 SUBMITTALS

A. See Section 013000 - Administrative Requirements for submittal procedures.

B. Product Data: Provide component sizes, rough-in requirements, service sizes, and finishes.

Upgrade 221006 - 2 Plumbing Piping Specialties

C. Manufacturer's Instructions: Indicate Manufacturer's Installation Instructions: Indicate assembly and support requirements.

D. Operation Data: Indicate frequency of treatment required for interceptors.

E. Maintenance Data: Include installation instructions, spare parts lists, exploded assembly views.

PART 2 PRODUCTS

2.01 GENERAL REQUIREMENTS

A. Specialties in Potable Water Supply Systems: Provide products that comply with NSF 61 and NSF 372 for maximum lead content.

2.02 DRAINS

A. Manufacturers:

1. Josam Company: www.josam.com/#sle.

2. Sani-Floor Trough Systems; Clog-Free Floor Trough Systems: www.sanifloor.com/#sle.

3. Substitutions: See Section 016000 - Product Requirements.

B. Roof Drains:

1. Assembly: ASME A112.6.4.

2. Body: Lacquered cast iron with sump.

3. Strainer: Removable polyethylene dome with vandal proof screws.

4. Accessories: Coordinate with roofing type, refer to Section :

a. Membrane flange and membrane clamp with integral gravel stop.

b. Adjustable under deck clamp.

c. Roof sump receiver.

d. Waterproofing flange.

e. Controlled flow weir.

f. Leveling frame.

g. Adjustable extension sleeve for roof insulation.

h. Perforated or slotted ballast guard extension for inverted roof.

i. Perforated stainless steel ballast guard extension.

5. Manufacturers:

a. OMG Roofing Products; Hercules-Plus: www.omgroofing.com/#sle.

b. Substitutions: See Section 016000 - Product Requirements.

C. Parapet Drains:

1. Lacquered cast iron body with aluminum flashing clamp collar and epoxy coated sloping grate.

D. Canopy and Cornice Drains:

1. Lacquered cast iron body with aluminum flashing clamp collar and epoxy coated flat strainer.

E. Roof Overflow Drains:

1. Lacquered cast iron body and clamp collar and bottom clamp ring; pipe extended to 2 inches above flood elevation.

F. Downspout Nozzles:

1. Bronze round with straight bottom section.

G. Area Drains:

1. Assembly: ASME A112.6.4.

2. Body: Lacquered cast iron with sump.

3. Strainer: Round nickel-bronze.

4. Accessories: Membrane flange and membrane clamp with integral gravel stop, with adjustable under deck clamp.

H. Floor Drain (FD-1):

Upgrade 221006 - 3 Plumbing Piping Specialties

1. ASME A112.6.3; lacquered cast iron or stainless steel, two piece body with double drainage flange, weep holes, reversible clamping collar, and round, adjustable nickel-bronze strainer.

I. Floor Drain (FD-2):

1. ASME A112.6.3; lacquered cast iron or stainless steel, two piece body with double drainage flange, weep holes, reversible clamping collar, and round, adjustable round nickel bronze strainer with removable perforated sediment bucket.

J. Floor Drain (FD-3):

1. ASME A112.6.3; lacquered cast iron or stainless steel, two piece body with double drainage flange, weep holes, reversible clamping collar, and round, adjustable nickel-bronze strainer with polished bronze funnel or anti-splash rim.

K. Floor Drain (FD-4):

1. ASME A112.6.3; lacquered cast iron or stainless steel, two piece body with double drainage flange, weep holes, reversible clamping collar, and round, adjustable nickel-bronze extra heavy duty strainer.

L. Floor Drain (FD-5):

1. ASME A112.6.3; lacquered cast iron or stainless steel, two piece body with double drainage flange, weep holes, reversible clamping collar, and round, adjustable nickel-bronze extra heavy duty strainer with hinged grate and sediment bucket.

M. Floor Drain (FD-6):

1. Lacquered cast iron or stainless steel, two piece body with drainage flange, heavy duty grate 6 inches wide, 12 inches long, dome strainer, end plates with gaskets.

N. Prefabricated Trench Drain (TD-1): Trench drain system assembled from factory fabricated, polymer concrete castings in standard lengths and variable depths, with integral joint flanges and integral grating support rails; includes joint gaskets and grating.

1. Trench Width: 12 inches.

2. Trench Section Length: 39 inches and 19-1/2 inches.

3. Grating Support Rail: Stainless steel.

O. Self-Washing Floor Trough (FT-1):

1. Comply with NSF 2 construction.

2. Construction: 16 gauge, 0.0598 inch stainless steel.

3. Number of Grates: 1.

4. Grating: Fiberglass, green.

P. Planter Drains:

1. ASME A112.6.4; lacquered cast iron body with sump.

2. Strainer: Removable polyethylene dome with stainless steel screen.

3. Accessories: Membrane flange and membrane clamp with integral gravel stop.

2.03 CLEANOUTS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jayrsmith.com/#sle.

2. Josam Company: www.josam.com/#sle.

3. Zurn Industries, LLC: www.zurn.com/#sle.

4. Substitutions: See Section 016000 - Product Requirements.

B. Cleanouts at Exterior Surfaced Areas (CO-1):

1. Round cast nickel bronze access frame and non-skid cover.

C. Cleanouts at Exterior Unsurfaced Areas (CO-2):

1. Line type with lacquered cast iron body and round epoxy coated gasketed cover.

D. Cleanouts at Interior Finished Floor Areas (CO-3):

Upgrade 221006 - 4 Plumbing Piping Specialties

1. Lacquered cast iron body with anchor flange, reversible clamping collar, threaded top assembly, and round gasketed scored cover in service areas and round gasketed depressed cover to accept floor finish in finished floor areas.

E. Cleanouts at Interior Finished Wall Areas (CO-4):

1. Line type with lacquered cast iron body and round epoxy coated gasketed cover, and round stainless steel access cover secured with machine screw.

F. Cleanouts at Interior Unfinished Accessible Areas (CO-5): Calked or threaded type. Provide bolted stack cleanouts on vertical rainwater leaders.

2.04 HOSE BIBBS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jayrsmith.com/#sle.

2. Watts Regulator Company: www.wattsregulator.com/#sle.

3. Zurn Industries, LLC: www.zurn.com/#sle.

4. Substitutions: See Section 016000 - Product Requirements.

B. Interior Hose Bibbs:

1. Bronze or brass with mounting flange, replaceable seat, hose thread spout, and integral or add-on vacuum breaker complying with ASSE 1011.

C. Interior Mixing Type Hose Bibbs:

1. Bronze or brass, hot- and cold- water wall-faucet with mounting flange, replaceable seats, hose thread spout, integral checks, handwheels, and vacuum breaker complying with

ASSE 1011.

2.05 HYDRANTS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jayrsmith.com/#sle.

2. Zurn Industries, LLC: www.zurn.com/#sle.

B. Wall Hydrants:

1. ASSE 1019, freeze resistant, self-draining, hose thread spout, and integral vacuum breaker.

C. Ground Hydrants:

1. Freeze resistant, locking recessed box, hose thread spout, operating key, and integral vacuum breaker.

2.06 WASHING MACHINE OUTLET BOXES

A. Manufacturers:

1. IPS Corporation/Water-Tite: www.ipscorp.com/#sle.

2. Zurn Industries, LLC: www.zurn.com/#sle.

3. Substitutions: See Section 016000 - Product Requirements.

B. Description: Plastic preformed rough-in box with brass quarter-turn ball valves or single lever-handle valves, socket for 2 inch waste, and slip-in finishing cover.

2.07 ICE MAKER OUTLET BOXES

A. Description: Plastic preformed square or round rough-in box with brass quarter-turn ball valve, and slip-in finishing cover.

2.08 BACKWATER VALVES

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jayrsmith.com/#sle.

2. Savko Plastic Pipe & Fittings, Inc: www.savko.com/#sle.

3. Zurn Industries, LLC: www.zurn.com/#sle.

B. Cast Iron Backwater Valves: ASME A112.6.4; lacquered cast iron body and cover, brass valve, extension sleeve, and access cover.

Upgrade 221006 - 5 Plumbing Piping Specialties

C. Plastic Backwater Valves: ABS body and valve, extension sleeve, and access cover.

2.09 BACKFLOW PREVENTERS

A. Manufacturers:

1. Apollo Valves: www.apollovalves.com/#sle.

2. Watts Regulator Company, a part of Watts Water Technologies:

www.wattsregulator.com/#sle.

3. Zurn Industries, LLC: www.zurn.com/#sle.

4. Substitutions: See Section 016000 - Product Requirements.

B. Reduced Pressure Backflow Preventer Assembly:

1. ASSE 1013; cast bronze body and stainless steel springs; two independently operating, spring loaded check valves; diaphragm type differential pressure relief valve located between check valves; third check valve that opens under back pressure in case of diaphragm failure, and non-threaded vent outlet.

2. Size: _____ inch assembly with threaded gate valves.

2.10 DOUBLE CHECK-VALVE ASSEMBLIES

A. Double Check Valve Assembly:

1. ASSE 1012; cast bronze body with corrosion resistant internal parts and stainless steel springs; two independently operating check valves with intermediate atmospheric vent.

2. Size: 3/4 to 2 inch, NPS assembly with threaded full port ball valves.

2.11 WATER HAMMER ARRESTORS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jayrsmith.com/#sle.

2. Watts Regulator Company, a part of Watts Water Technologies:

www.wattsregulator.com/#sle.

3. Zurn Industries, LLC: www.zurn.com/#sle.

4. Substitutions: See Section 016000 - Product Requirements.

B. Water Hammer Arrestors:

1. Stainless steel construction, bellows type sized in accordance with PDI-WH 201, precharged suitable for operation in temperature range minus 100 to 300 degrees F and maximum 250 psi working pressure.

2.12 SUMPS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jrsmith.com/#sle.

2. Zurn Industries, LLC: www.zurn.com/#sle.

3. Substitutions: See Section 016000 - Product Requirements.

B. Precast concrete with required openings and drainage fittings.

C. Cover: 3/8 inch thick checkered steel plate with gasket seal frames and anchor bolts.

2.13 SANITARY WASTE INTERCEPTORS

A. Manufacturers:

1. Jay R. Smith Manufacturing Company: www.jrsmith.com/#sle.

2. Zurn Industries, LLC: www.zurn.com/#sle.

3. Substitutions: See Section 016000 - Product Requirements.

B. Oil Interceptors:

1. Construction:

a. Material: Epoxy coated fabricated steel.

b. Rough-in: On floor.

c. Cover: Steel, epoxy coated, non-skid with gasket, securing handle, and enzyme injection port, recessed for floor finish.

Upgrade 221006 - 6 Plumbing Piping Specialties

C. Grease Interceptors:

1. Construction:

a. Material: Epoxy-coated fabricated steel.

b. Rough-in: On floor.

c. Cover: Steel, epoxy coated, non-skid with gasket, securing handle, and enzyme injection port, recessed for floor finish.

D. Sand/Sediment Interceptors:

1. Epoxy coated cast iron body and secured cover with removable stainless steel sediment bucket.

2.14 MIXING VALVES

A. Thermostatic Master Mixing Valves:

1. Manufacturers:

a. Leonard Valve Company: www.leonardvalve.com/#sle.

b. Substitutions: See Section 016000 - Product Requirements.

2. Valve: ASSE 1017, bronze or brass body; thermostatic element; corrosion- and lime-resistant internal components; integral locking temperature adjustment.

3. Accessories:

a. Strainer stop checks on inlets.

b. Shut-off valve on outlet.

c. Stem thermometer on outlet.

4. Cabinet: 16 gauge, 0.0598 inch prime-coated steel, for recessed mounting with keyed lock.

B. Automatic Compensating Valves for Individual Showers and Tub and Shower Combinations:

1. Manufacturers:

a. Substitutions: See Section 016000 - Product Requirements.

2. Valve: ASSE 1016, combination thermostatic and pressure balancing, bronze or brass body with inlet checkstops; integral volume and temperature control with adjustable high-temperature limit stop.

3. Valve Trim: Escutcheon with ADA-compliant lever handle.

2.15 FLOOR DRAIN TRAP SEALS

A. Description: Push-fit EPDM or silicone fitting with a one-way membrane.

PART 3 EXECUTION

3.01 INSTALLATION

A. Install in accordance with manufacturer's instructions.

END OF SECTION

221006 - Plumbing Piping Specialties