SF 30 - 2031ZA27Q00005 Currency Labels.pdf

PDF 830 KB Posted

Attached to
Currency Labels
Solicitation number
2031ZA27Q00005
Issued by

About this file

This file is a Questions and Answers document for a federal contract solicitation issued by the Bureau of Engraving and Printing (BEP), a division of the Treasury Department. The solicitation covers the manufacture and supply of currency labels including printed and blank bundle labels, Cash-Pak labels, and Federal Reserve Bank Eagle labels for U.S. currency denominations ($1, $2, $5, $10, $20, $50, and $100). The contract is structured as an Indefinite Delivery/Indefinite Quantity (IDIQ) agreement with a minimum guaranteed order of $200,200.00 and a maximum aggregate ordering limitation of $2,017,099.24 across five one-year ordering periods. Pricing is firm fixed price on an F.O.B. destination basis with potential delivery locations in Washington DC, Landover, Maryland, and Fort Worth, Texas.

The submission deadline for quotations and physical samples is December 1, 2026, at 3:30 PM EST, with no extensions permitted. Samples must include 400 printed bundle labels per roll, 3,300 blank bundle labels per roll, 1,300 blank Cash-Pak labels per roll (both color-leading and white-leading unwind directions), and 2,000 Federal Reserve Bank Eagle labels per roll. Key technical requirements include thermal transfer printing capability for variable information, barcode readability per ISO/IEC 15416:2025 standards with minimum ink density of 0.95 optical density, specific Pantone color matching with visual inspection for color blocks and ΔE00 ≤ 3.0 for Eagle labels measured with calibrated spectrophotometers, bundle label dimensional tolerance of ±1 mm, optical brightener responsiveness to 365 nm UV light on all label stock, and tamper-evident and repositionable adhesive properties. The solicitation allows nonmanufacturer/reseller primes under FAR 52.219-33 provided they are primarily engaged in retail or wholesale trade and take ownership or possession of items manufactured by U.S. small businesses. Small business subcontracting of manufacturing to similarly situated entities is permitted under FAR 52.219-14. Past performance references may be satisfied through subcontractor or teaming experience, and quoters without relevant past performance receive neutral evaluation ratings. Labels must be supplied in continuous rolls without perforations to the release liner, and BEP will provide sequential numbering data in Microsoft Excel format after contract award. The estimated historical average annual consumption is approximately $206,203 based on five-year purchasing data, though specific quantities by line item are not provided due to material specification changes making all items new line items.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

�������������
����������
��
���������������
�����������
������������
���������
��������������
��
�
������ ��!"#$%&'��!�(�%&�")*+�,$'-./'+0�0���'�&')'#1'-�"0�02'�3$")'�-'4#.+"0'-�!�&�02'�&')'#30��!��!!'&4�3&#�&�0��02'�2�%&�"+-�-"0'�43')#!#'-�/"(�&'4%$0�#+�&'5')0#�+��!�(�%&��!!'& ��#�����6������������

�����6������

��������������
��

����������6��������� �� ������

78��9:;<=>?@>A��)�

�
���� ����
����� �����B�����������
�����������
�
������
� ������������������

?:7@C:7@>�<D�E<F9G9>?>9<@H:<C9D9G?>9<@�<D�G<@>=?G> � ��)�+0&")0�#-�)�-'I ��"/'+-/'+0J/�-#!#)"0#�+�+%/�'& K ��'!!')0#1'�-"0' L ��&'M%#4#0#�+J3%&)2"4'�&'M%#4#0#�+�+%/�'& � ��3&�5')0�+%/�'&�NOP�QRRSTUQVSWXY ��"-/#+#40'&'-��(�NOP�Z[\W]�[\Q̂�O[W_�̀X )�-'

E>?@C?=C�D<=:�ab�c=7d8�eeHfbegh�3�������������.4"�!"&��L��)!&���K ILK

!")#$#0(�)�-' �i" ��"/'+-/'+0��!�4�$#)#0"0#�+�+%/�'&i� ��-"0'-�Njkk�Olkm�nnX�o" ��/�-#!#)"0#�+��!�)�+0&")0J�&-'&�+%/�'&�o� ��-"0'-�Njkk�Olkm�npXee8��>q9E�9>7:�<@Fr�?;;F97E�><�?:7@C:7@>E�<D�E<F9G9>?>9<@E���������0��� ��6��

�����������
�#����L ��0��������

���������������������� ���������� ����s � � ��s �

�I ��"))�%+0#+.�"+-�"33&�3&#"0#�+�-"0"�NOP�]WtuT]WvX ���������� ��� w��������

���������������������������wea8��>q9E�9>7:�?;;F97E�<@Fr�><�:<C9D9G?>9<@E�<D�G<@>=?G>EH<=C7=E8�9>�:<C9D97E�>q7�G<@>=?G>H<=C7=�@x:y7=�?E�C7EG=9y7C�9@�9>7:�ez8)2')*��+' " ��02#4�)2"+.'��&-'&�#4�#44%'-�3%&4%"+0�0����NjRWUTP{�Qu[\Z]T[{X�02'�)2"+.'4�4'0�!�&02�#+�#0'/��L�"&'�/"-'�#+�02'�)�+0&")0��&-'&���������+%/�'&�#+�#0'/��o" � ��02'�"��1'�+%/�'&'-�)�+0&")0J�&-'&�#4�/�-#!#'-�0��&'!$')0�02'�"-/#+#40&"0#1'�)2"+.'4�N|uU\�Q|�U\Q̂}W|�T̂�RQ{T̂}�ZPPTUW~�������QRR]ZR]TQ[TẐ�vQ[Q~�W[U���4'0�!�&02�#+�#0'/��L��3%&4%"+0�0��02'�"%02�&#0(��!�!"&�LK �oK��� ) ��02#4�4%33$'/'+0"$�".&''/'+0�#4�'+0'&'-�#+0��3%&4%"+0�0��"%02�&#0(��!�- ���02'&�NjRWUTP{�[{RW�ZP�_ZvTPTUQ[TẐ�Q̂v�Qu[\Z]T[{X
's����

�����6����������

����
��������������
�������
�#���i"�����o"��
��������������

������� ��) ��-"0'�4#.+'-��" ��+"/'�"+-�0#0$'��!�4#.+'&�Nl{RW�Z]�R]T̂[X ��) ��-"0'�4#.+'-��" ��+"/'�"+-�0#0$'��!�)�+0&")0#+.��!!#)'&�Nl{RW�Z]�R]T̂[X �L ��-'4)&#30#�+��!�"/'+-/'+0J/�-#!#)"0#�+���]}Q̂T�Wv�V{�����|WU[TẐ�\WQvT̂}|~�T̂USuvT̂}�|ZSTUT[Q[TẐ�UẐ[]QU[�|uV�WU[�_Q[[W]��\W]W�PWQ|TVSW�X

3".'�������!����3".'4� ��#44%'-��( )�-' � ��+"/'�"+-�"--&'44��!�)�+0&")0�&�N�u_VW]~�|[]WW[~�UZû[{~�j[Q[W�Q̂v��O���ZvWX ���

��� ��)�+0&")0�&J�!!'&�&NjT}̂Q[u]W�ZP�RW]|Ẑ�Qu[\Z]T�Wv�[Z�|T}̂X ��� ��%+#0'-�40"0'4��!�"/'&#)"NjT}̂Q[u]W�ZP��Ẑ[]QU[T̂}��PPTUW]X�]W�TZu|�WvT[TẐ�ûu|QVSW

¢£��¤� ¤¥���¥¦�§£̈���©��ª©��§�̈��§¥�«£��¬��§£��¦¥��¥̈�¬®��̄��§§�«£©��§���°��� ��«±�²�³���́ ̈«���«£�ª����ª�§�ª���̄��̄�µ�¶����̈�� �ª�¦¥�§·̄�̄����� �§£��̧���§̈¥���¦ ¥©�§£��¹��ª¥ �̄�����¥§£� �§� ©����ª�«¥�ª̈§̈¥��� �©�̈��§£����©�̄�

¢ ���� ±��¥©©¥���� ¹̈«������§� �«̧�̈�̈§̈¥�º������»§£��§ ��§��¼¼��£̈�¬§¥�º���º�����½°����º�¾�¢¿� ��©�����Àµ̄ ������� � ����Á��Á���µ

��Á�ÂÁ���µ

QUESTIONS AND ANSWERS

Question 1. We identified contract 2031ZA22D00003 as the previous currency-label contract.

Could BEP provide the awarded unit prices or Attachment A price schedule from that contract, including applicable modifications?

Answer 1. Due to material specification changes, item lines in this solicitation shall be treated as new items. Thus, no previous unit price will be provided.

Question 2. Could BEP provide historical quantities purchased by individual stock number or CLIN over the previous two to three years?

Answer 2. The average purchased dollar amount in the past five year is about $206,203/year.

Question 3. Could BEP provide the approximate annual expenditure for currency labels during the previous contract?

Answer 3. See answer #2.

Question 4. Are there minimum or maximum quantities that may be ordered under a single delivery order?

Answer 4: B.3 CONTRACT MAXIMUM AND MINIMUMS—IDIQ

(a) Contract Minimum: The minimum guaranteed amount for this IDIQ is $200,200.00.

Following this initial obligation, individual delivery orders will be issued resulting in the obligation of funds to cover the work required under that individual delivery order.

(b) Contract Maximum: It is anticipated that the maximum aggregate ordering limitation, inclusive of all the line items, is Not to Exceed (NTE) $2,017,099.24, the total of all five one year ordering periods combined. The maximum aggregate dollar value of all delivery orders awarded under the resulting IDIQ contract shall not exceed the Contract Maximum. There is no guarantee on the number of delivery orders that the contractor will receive or the amount of money beyond the minimum order guarantee set forth in the

RFQ.

Also read 52.216-19 Order Limitations in the solicitation, page 52.

Question 5. What prompted BEP to issue a new solicitation when an existing contractor currently supplies these products? Is this a scheduled recompete, a change in requirements, or an effort to increase competition?

Answer 5. It is a scheduled recomplete with changes of material specification.

Question 6. Can BEP share any recurring manufacturing, supply, or delivery challenges experienced under the previous contract, to the extent publicly releasable?

Answer 6. No recurring manufacturing, supply, or delivery challenges are experienced with current contract.

Question 7. Is the existing contractor expected to continue supplying labels during a transition period, and how will BEP manage that transition?

Answer 7. The existing contractor will continue to provide labels until the end of the contract ordering period. The new contractor shall be ready to provide labels with the start date of an ordering period after awarding.

Question 8. Would BEP accept a production process involving flexographic preprinting of the required label colors and designs, followed by thermal-transfer printing of variable information and sequential barcodes using Zebra printers, provided all specifications are met?

Answer 8. Under the circulations that all colors and designs requirements are met, flexographic preprinting of the colors and designs is acceptable. Thermal transfer printing is required for variable information.

Question 9. Are there specific minimum print-resolution requirements for the thermal-transfer printers?

Answer 9. In current material specification, there is no requirement on print resolution.

However, there are requirements for barcode readability, ink density, color code and other print quality.

Question 10. Would BEP permit approved blank labels to be manufactured and maintained in inventory before receiving an individual delivery order?

Answer 10. BEP requires that the material has at least one year warranty from the date of delivery. Please see section H.8 PRODUCT WARRANTY (RFO 52.246-17) for more details.

Question 11. Could BEP provide the specifications or material composition of the shrink-wrap film used during adhesion and tamper-evidence testing?

Answer 11. BEP does not retain the material composition for shrink-wrap film. The current shrink-wrap film specification is shared as a separate document.

Question 12. Are there any previously qualified or approved facestock, adhesive, or liner constructions that manufacturers may use as references?

Answer 12. No.

Question 13. What specific testing documentation must be provided to demonstrate adhesive repositionability and tamper-evidence performance?

Answer 13. There is no specific requirement on testing documentation for adhesive repositionability and tamper-evidence. These two requirements will be evaluated based on description in section M, b) Material Components.

Bundle Label

• Reference specification Spec L: PSC - current version, Section 3.2.1. and 3.17 Pass/Fail o Bundle labels shall be repositionable within one hour after application to the wrap film. The bundle labels should not be repositionable after six hours of application.

o Evaluation: Apply five labels on banknotes packaging surface and check on the repositionability at 45 min, and tamper evidence at 6 hours after application. All five labels shall pass at both 45 min and 6 hours as a result for passing this specification.

Question14. Can BEP identify the required Zebra ribbon cartridge part number and whether wax, wax-resin, or resin ribbon is required?

Answer 14. BEP does not restrain the usage of any specific Zebra printer technic as long as the product meets printing quality requirements.

For line-item 1029, Zebra cartridge Part No is 17152893, Size 130.0mm x 450m, Production No.

TR4085plus.

Question 15. Are there specific ribbon-performance requirements relating to barcode density, abrasion resistance, or smudge resistance?

Answer 15. The requirement for print quality is in section C, 3.15, and 4.4. The print quality of the Bar Code shall be evaluated in accordance with ISO or IEC 15416:2025. The printed ink density shall have a minimum value of 0.95 reflection optical density when measuring using an X-rite spectrometer.

Question 16. How will BEP provide sequential numbering information, process numbers, barcode data, and other variable information for each delivery order?

Answer 16. Section C, 3.6.1 of the BEP Currency Labels Specification, BEP will provide the Process Set Number, bank, series, and note denomination required for each Process Set at the time of order. The numbering algorithms and requirements for generating sequential label information are provided in Section 6.3 of the specification. Data set will be provided to contractor after awarding.

Question 17. Will the data be provided electronically in Excel, CSV, TXT, or another specified format?

Answer 17. BEP will provide the required sequential numbering and variable printing information electronically in Microsoft Excel format.

Question 18. Does BEP provide the exact starting and ending numbers, or is the contractor responsible for generating the complete sequential numbering file based on supplied instructions?

Answer 18: For the test sample, supplier can select a start and end number and then generate the required sequential label information in accordance with these algorithms and ensuring the accuracy of the printed labels. For future production materials, BEP will provide data set.

Question 19. How are damaged, missing, incorrectly printed, or rejected labels handled within a sequential process set?

Answer 19. In Sections 4.2.3 and 5.1.1, printed labels must maintain the required numerical sequence and be delivered in continuous rolls without breaks. No numbering errors are considered acceptable. Damaged, missing, incorrectly printed, or rejected labels must be addressed to ensure that the completed Process Set meets all specification requirements.

Question 20. What documentation is required to demonstrate complete numbering accuracy and reconciliation of each production run?

Answer 20. In Section 4.6.1, the contractor shall provide a signed and dated Certificate of Compliance (CoC) confirming that the delivered labels meet the specification requirements, accompanied by inspection and test reports. The contractor shall also certify the readability of barcodes on Cash-Pak and bundle labels. Section 4.2.3 establishes that no numbering errors are acceptable.

Question 21. Are there specific cybersecurity, confidentiality, file-retention, or secure data-transfer requirements for the sequential information provided by BEP?

Answer 21. The BEP Currency Labels Specification does not establish specific cybersecurity, confidentiality, electronic file-retention, or secure data-transfer requirements for sequential printing information.

Question 22. The Sources Sought information references printed bundle-label process sets of 3,200 or 6,400 labels, while Attachment A appears to identify printed items in 400-label rolls.

CoUld BEP clarify whether additional printed label CLINs will be included?

Answer 22. Table 1 provides all possible ordering sets and types of currency labels. Price schedule, attachment A, provides current active label types. No additional CLINs are known now. The printed bundle label 100K process is 3.200 labels, and 200K process is 6.400 labels.

Question 23. The technical specifications also reference certain 2,000-label Cash-Pak rolls (Table 1, rows O, P and R) that do not appear in Attachment A, which lists blank Cash-Pak labels only in 1,300-label rolls. Will 2,000-label Cash-Pak rolls be ordered, and if so, will CLINs be added? In addition, the Sources Sought table labels one Cash-Pak row "White Leading," while specification Table 1 row L is the diagonal-dropout design. Could BEP confirm the unwind direction for each Cash-Pak stock number?

Answer 23. Table 1 provides all possible ordering sets and types of currency labels. Price schedule, attachment A, provides current active label types.

Regarding the label design, Solid Color (SC) Cash-Pak labels are designated for the $1 and $2 denominations, while Diagonal Dropout (DD) Cash-Pak labels are designated for the remaining denominations, as indicated by the label classifications in Table 1. White leading and color leading are the unwinding direction of the roll. Price schedule, attachment A, has description of unwinding direction for each cash pak label.

Question 24. For CLIN x031, Test Labels, could BEP describe the construction required (printed or blank, label size, and adhesive)?

Answer 24. In Section 1.2.7, test labels are intended for testing new equipment, processes, and procedures. Test labels may require minor modifications from regularly ordered labels, depending on the intended testing. The specific construction, dimensions, printing requirements, and any deviations from standard adhesive requirements will be determined by BEP based on the testing needs.

Question 25. How many labels should the $100 printed bundle-label sample roll contain? Should it be a complete 100K process set of 3,200 labels? Is a printed Cash-Pak sample also required?

Answer 25. In Sections 1.2.1 and 3.5.1, a complete 100K Process Set consists of 3,200 printed bundle labels and 200 printed Cash-Pak labels. However, the specification does not establish the quantity required for solicitation sample rolls. For solicitation sample rolls, 400 printed labels per roll is acceptable.

Question 26. Should the blank sample rolls contain full production roll counts (3,300 bundle, 1,300 Cash-Pak, and 2,000 Eagle labels)?

Answer 26. Samples shall be submitted based on each line item on price schedule, attachment A for blank sample rolls.

Question 27. Because approval of the Safety Data Sheet and EHS certification is required before samples are evaluated, may quoters submit these documents before December 1, 2026 for advance review?

Answer 27. All documents shall be submitted before or on Dec 1st, 2026, at 3:30pm, EST.

Question 28. Will quoters be informed of their sample evaluation results, including which criterion a sample did not meet? Is there any opportunity to correct or resubmit samples?

Answer 28. A detailed evaluation result will be shared to each quoter after completion of technical evaluation section. All submission is final and no correction is acceptable. The CO might ask question(s) for clarification but not to correct the issue of the samples.

Question 29. What is the approximate share of deliveries to the Washington, DC facility, the Landover warehouse, and the Fort Worth facility? Because pricing is F.O.B. destination, freight cost varies significantly between these locations.

Answer 29. BEP understands that shipping costs may vary depending on the delivery destination and acknowledges the impact on pricing. However, the distribution of deliveries among the Washington, DC, Landover, and Fort Worth facilities will depend on operational needs and ordering requirements. Therefore, BEP cannot guarantee a specific percentage of deliveries to each location. Quoters should account for potential deliveries to all specified locations when preparing their F.O.B. destination pricing since this is a firm fixed price contract.

Question 30. Spec 3.7.1 describes blank bundle labels as "intended for thermal transfer printing," and spec 3.7.2 says blank Cash-Pak labels "shall be made from label stock suitable for thermal transfer printing." The spec does not state a print method for the printed bundle labels (3.6.1), the printed Cash-Pak labels (3.6.2), or the Federal Reserve Bank Eagle labels (3.10).

Does BEP intend to thermal transfer print on all label types (blank bundle, blank Cash-Pak, printed bundle, printed Cash-Pak and Eagle), or only on the blank bundle and blank Cash-Pak rolls? Put another way, must the facestock for the printed bundle, printed Cash-Pak and Eagle labels also be thermal transfer printable?

Answer 30. BEP confirms that both blank and printed bundle labels, as well as blank and printed Cash-Pak labels, are required to use facestock suitable for thermal transfer printing.

For Federal Reserve Bank (FRB) Eagle labels, thermal transfer compatibility is not explicitly required by the current specification; however, the use of thermal transfer printable facestock is recommended.

Question 31. Attachment 7 (page 31), "Cash-Pak Roll and Label Unwind Direction," shows a dashed line across the liner between every Cash-Pak label, on both the printed roll and the blank roll. It looks like a perforation. However, Section 3.6.2 says printed Cash-Pak labels are supplied "in rolls in continuous form without perforations to the release liner," Section 3.16 says the liner "shall be free from die cuts, slits, and wrinkles," and Section 3.7.2 for blank Cash-Pak labels says only "continuous form."

Could you please clarify:

Question 31a. Is the dashed line on Attachment 7 a perforation, a label spacing mark, or something else?

Answer 31a. The dashed lines shown in Attachment 7 are intended to illustrate the separation between adjacent Cash-Pak labels and do not represent perforations in the release liner.

Question 31b. If it is a perforation, does it apply to blank Cash-Pak rolls, printed Cash-Pak rolls, or both, and what are the required perf pattern (cut and tie), depth, and position?

Answer 31b. Both printed and blank Cash-Pak labels shall be supplied in continuous roll form without perforations to the release liner. Therefore, no perforation pattern, depth, or position requirements apply.

Question 31c. Section L, Material Samples, does not state how many labels go on each sample roll and refers to the specification attachments and Section 5 for format. Please specify the number of labels per roll for each sample type: printed bundle, blank bundle, blank Cash-Pak, and Eagle. (For example, Table 1 lists blank Cash-Pak rolls at both 1,300 and 2,000 labels.)

Answer 31c. Table 1 of the Currency Labels Specification lists all the various label quantities per roll available for ordering, however, not all variations are currently active.

For the required number of labels per roll for material samples, please refer to the Currency Label Price Schedule, which specifies the roll quantities for each line item.

For reference, the required quantities are:

• Printed Bundle Labels: 400 labels per roll.

• Blank Bundle Labels: 3,300 labels per roll.

• Blank Cash-Pak Labels: 1,300 labels per roll (both color-leading and white-leading unwind directions).

• FRB Eagle Labels: 2,000 labels per roll.

Please refer to Attachment A - Currency Label Price Schedule for the corresponding line items and BEP stock numbers.

Question 32. For the samples that we need to submit, is the deadline 12-1-2026?

Gathering die, tooling, inks, would take a little longer than that, is there a way we can extend the delivery date for the samples? When do you plan on awarding this contract?

Answer 32. No extension is permitted for this requirement due to established administrative deadlines and the government evaluation schedule. All samples must be received by 12/1/2026 at 3:30pm E.S.T. This also ensures fair and timely evaluation process for all participating quoters.

Question 33. Limitations on subcontracting / manufacturing: Please confirm that a small business prime may satisfy FAR 52.219-14 by subcontracting label manufacturing to a U.S.

small business that is small under NAICS 322299 (a "similarly situated entity"), with that entity's work counting toward the prime's performance.

Answer 33. Read 52.219-14, page 56 Limitations of Subcontracting (e)(2).

Question 34. Nonmanufacturer rule: Is FAR 52.219-33 applicable to this acquisition? If so, will BEP accept an offer in which the prime is not the manufacturer but the end items are manufactured in the U.S. by a small business under the arrangement in Q1?

Answer 34: Yes, the Contractor shall—

(i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas.

(ii) Be primarily engaged in the retail or wholesale trade and normally sell the type of item being supplied; and

(iii) Take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery.

Question 35. Major first-tier supplier: Spec Section 4.1 references auditing major suppliers.

Should the QA plan, TDS/SDS, material certifications, and plant-survey information be provided for the manufacturing subcontractor rather than (or in addition to) the prime?

Answer 35. Prime contractor.

Question 36. Past performance: Section L asks for at least two references relevant to manufacturing pressure-sensitive currency labels for BEP. May references from the manufacturing subcontractor satisfy this requirement? Will an offeror with no relevant past performance receive a "neutral" rating that is treated as acceptable under LPTA?

Answer 36: Contracting officers may consider an offeror’s experience as a subcontractor or teaming or joint venture. Please read Section L, Experience and Past Performance.

FAR 15.202(c) Quoter with no relevant past performance experience or whom past performance is not available may not be evaluated favorably or unfavorably on past performance. This means it is neutral.

Question 37. Samples timing: Given that samples are due with the quote on Dec 1, 2026 (and the Thanksgiving holiday), would BEP consider a later sample delivery date (e.g., 10 business days after the quote due date), or accept samples shipped separately from the emailed quote?

Answer 37: No extension is permitted for this requirement due to established administrative

Question 38. Sample EHS/SDS review: Must SDS/EHS approval occur before samples are delivered, or may the SDS be submitted together with the samples? Is there a separate address/contact for EHS submissions?

Answer 38. EHS certification and SDS shall be submitted electronically or hard copy to CO and COR. Samples will be submitted to COR only.

Question 39. Printed $100 sample: Please confirm the print data (New York, $100, Series 21, item G, QB-E 24) and provide the beginning serial number to be used, or confirm the offeror may select it.

Answer 39. For the test sample, supplier can select a start and end number and then generate the required sequential label information in accordance with these algorithms and ensuring the accuracy of the printed labels. For future production materials, BEP will provide data set.

Question 40. Quantities: The estimated annual quantities in the sources-sought Q&A (approx.

2,194 rolls/yr) do not map one-to-one to Attachment A CLINs x001-x031. Please provide estimated annual quantities by CLIN.

Answer 40. Due to specification changes, all items under CLINs are considered as new line items. No estimated annual quantities by CLINs could be provided. Section B3 (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $200,200.00 (b) Contract Maximum: It is anticipated that the maximum aggregate ordering limitation, inclusive of all the line items, is Not to Exceed (NTE) $2,017,099.24, the total of all five one-year ordering periods combined.

Question 41. Color tolerance: What Delta E tolerance applies to the Pantone color blocks (297U, 347U, 182U, 107U, 256U, 467U, 459U) and the FRB Eagle green?

Answer 41. Pantone color blocks will be evaluated using “Visual inspection”. Delta E tolerance for Eagle label is provided in Section C, 3.10. The eagle label color value shall be L = 42.6, a = - 51.94, and b = 16.98 with ΔE00 ≤ 3.0 when measured with a calibrated spectrophotometer.

Question 42. Artwork: Will BEP provide electronic artwork/templates (dielines, color block positions, Eagle artwork) after award, or before samples?

Answer 42. No.

Question 43. Emergency shipping (CLIN 30): How should it be priced (per shipment, per roll, or not-to-exceed)?

Answer 43. It shall be priced per delivery order NTE amount.

Question 44. Delivery locations: Please provide the expected split of orders among the DC, Fort Worth, and Landover facilities.

Answer 44. The distribution of deliveries among the Washington, DC, Landover, and Fort Worth facilities will depend on operational needs and ordering requirements. Therefore, BEP cannot guarantee a specific percentage of deliveries to each location. Quoters should account for potential deliveries to all specified locations when preparing their F.O.B. destination pricing.

Question 45. Are there any amendments or incumbent sample data (e.g., approved material constructions) available to offerors?

Answer 45. No.

Question 46. What is the current anticipated award date, and where will the award result be published?

Answer 4. The anticipated award date is unknown at this time but will be posted in Home | SAM.gov. once the award is made.

Question 47. We are reviewing your solicitation and we are interested on participating on this solicitation. We have a question for you: On Question+and+Answers file:

Question d: you gave a table with roll quantities. Can you please clarify the roll quantity on row 3,4,5,6,7,8,10,12,14,16,19 &20 is for each denomination? Or total quantity?

https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsam.gov%2F&data=05%7C02%7CSusan.Delacruz%40bep.gov%7C635b370c4dea4e0b199608df39c50b45%7C76afa90f9d9b4931822ef46265dbb057%7C0%7C0%7C639293190628854606%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=syNlB18q8nFdQpgiEvW%2FDqQ5qReFnB1XaLSkvdOapZc%3D&reserved=0 https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsam.gov%2F&data=05%7C02%7CSusan.Delacruz%40bep.gov%7C635b370c4dea4e0b199608df39c50b45%7C76afa90f9d9b4931822ef46265dbb057%7C0%7C0%7C639293190628854606%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=syNlB18q8nFdQpgiEvW%2FDqQ5qReFnB1XaLSkvdOapZc%3D&reserved=0

Sample row 3:

5,10,20,50,100 PRINTED PROCESS LABEL

SET (Diagonal drop out)

Is the quantity interpreter correctly below, 5 = 133 rolls 10 = 133 rolls 20=133 rolls 50=133 rolls 100= 133 rolls Do you need 133 rolls of each? With a total of 133*5 = 665 rolls of PRINTED PROCESS LABEL SET (Diagonal drop out)

Can you please provide the estimated annual quantities for each label?

Answer 47. This estimation is based on last five years’ average consumption. Row 3,4,5,6,7,8,10,12,14,16,19 &20 are quantity for all denomination listed in that row. The actual ordering amount varies based on production schedule.

Question 48. Request for Extension of Quotation and Sample Submission Deadline The solicitation currently requires both the quotation and physical samples to be submitted by December 1, 2026, at 3:30 PM EST.

The sample schedule in Section L appears to require approximately 54 rolls across the specified label stock numbers and configurations. Given the specialized manufacturing requirements, including custom tooling, Pantone color matching, specialized facestocks, optical brightener response, and the different roll configurations, additional time may be necessary for manufacturers to develop, produce, inspect, and validate the samples.

We respectfully request that BEP consider extending the quotation and sample submission deadline by 30–60 days to allow sufficient time for proper sample development and preparation.

Alternatively, would BEP consider accepting the quotation by the current deadline and permitting physical samples to be submitted under a separate, extended schedule for subsequent evaluation? We would appreciate the Government's consideration of either option.

Answer 48. All documents shall be submitted before or on Dec 1st, 2026, at 3:30pm, EST.

Question 49. Apparent Typographical Error in SF 1449 – Block 6 Block 6 of the SF 1449 identifies the solicitation issue date as October 29, 2029. However, the original opportunity publication date on the Government website is October 29, 2026, at 2:15

PM EDT.

Answer 49. The original posting was October 29, 2026. 9 (year) was a typo error.

Question 50. Roll Construction – Breaks and Splices Sections 3.8, 3.9, and 5.1.1 address continuous label rolls and the prohibition of breaks or splices in the label material/web.

Could you please clarify whether this restriction applies only to the finished label material or also prohibits splices in the release liner and master-roll web?

Answer 50. The requirements apply to final label products which will be supplied to BEP.

Question 51. Cash-Pak Label Perforations Section 3.6.2 specifies that printed Cash-Pak labels must be supplied in continuous form without perforations to the release liner. We would appreciate clarification on whether this requirement also applies to blank Cash-Pak labels and all applicable Cash-Pak configurations.

We would also appreciate clarification on how this requirement should be interpreted alongside the applicable details in Attachment 7.

Answer 51: The requirements on “continuous form without perforations to the release liner” applies to all label rolls. The dashed lines shown in Attachment 7 are intended to illustrate the separation between adjacent Cash-Pak labels and do not represent perforations in the release liner.

Question 52. Sample Evaluation and Technical Feedback We understand that BEP will evaluate the submitted samples under production-line conditions.

Could you please clarify:

• The anticipated timeline for sample evaluation.

• Whether BEP will provide specific test results and technical feedback if a sample does not meet the acceptance criteria.

• Whether manufacturers may be given an opportunity to correct deficiencies and submit replacement samples, if deemed appropriate by BEP.

Answer 52: Samples are due together with the proposals. BEP will coordinate sample evaluation with production schedule. Each vendor will receive a technical evaluation report.

Question 53. Security and Handling Requirements Could you please clarify whether there are any additional security, chain-of-custody, or handling requirements applicable to the manufacturing, storage, and transportation of labels containing sequential numbering information?

Answer 53. The BEP Currency Labels Specification does not establish specific cybersecurity, confidentiality, electronic file-retention, or secure data-transfer requirements for sequential printing information.

Question 54. Vendor is evaluating the Currency Labels RFQ. We would source from a qualified U.S. label manufacturer. Please clarify whether a nonmanufacturer/reseller prime is eligible, required samples and barcode verification, approved label specifications, and delivery schedule.

We understand samples and quotes are due December 1; please confirm any amendments. This is a question, not a quotation.

Answer 54: See #34 answer. Amendment A00001 will be posted to answer questions from the vendors.

Question 55. The solicitation identifies sample quantities for evaluation but does not appear to specify a separate sample submission date. Please confirm when evaluation samples are due and whether samples must be submitted with the proposal or may be submitted separately.

Answer 55. the deadline for submission of samples and other requirement is due by 12/1/2026 @ 3:30pm EST.

Question 56. Subject to the sample submission requirements in Question #1, would BEP consider extending the proposal and/or sample submission timeline to allow suppliers sufficient time to qualify materials, validate new requirements, produce evaluation samples, and prepare fully compliant submissions, particularly given the holiday schedule during the proposal period?

Answer 56. No extension is permitted for this requirement due to established administrative

Question 57. Barcode and Color Verification Requirements The solicitation establishes barcode verification and color acceptance criteria. Please confirm whether First Article approval combined with documented production quality records is sufficient, or if ongoing lot-by-lot verification and reporting are required.

Answer 57. The requirements of barcode and color are applied to solicitation samples and all future products provided by the supplier. For each delivery, supplier shall provide BEP with a Certificate of Conformance to warrant all products meet specifications.

Question 58. Eagle Label Color Verification Scope The solicitation establishes color targets and ΔE00 tolerances for Eagle labels. Please confirm whether Eagle labels are the only products requiring instrument-based color verification, or if similar requirements apply to OCD, NXG, CFD, Cash-Pak, or other label types.

Answer 58. The evaluation methods for each label are listed in the Section C Specification.

3.10 Federal Reserve Bank Eagle Labels. The cut labels shall be 133.4mm by 127.4mm (5¼ inch by 5 inch) in size with a one-color imprint in green ink. The labels shall be supplied in rolls of 2,000 labels with 6.4 mm (¼ inch) spacing between the labels. The eagle label color value shall be L = 42.6, a = -51.94, and b = 16.98 with ΔE00 ≤ 3.0 when measured with a calibrated spectrophotometer. Color shall be measured using X-Rite spectrometer following ASTM 308-22 and E 1164-23. These labels shall be tamper proof and have permanent pressure sensitive adhesives on the back. The rolls shall be printed in accordance with Roll Label Unwind Directions (See attachments 8, 9, and 10).

3.11 Color Code. The dollar denomination shall be coded by means of a color block in both bundle and Cash-Pak labels. The color shall be a close visual match to the Pantone® colors specified in Section 3.4 and Table 2. The absence of a color block on bundle labels denotes one dollar denomination. The layout of the color blocks is shown in Attachments 3 and 4 for bundle labels and Attachment 5 for Cash-Pak labels.

Question 59. Optical Brightener Requirement The previous specification applied the optical brightener requirement to bundle label stock. The current solicitation includes this requirement within the general material requirements. Please confirm which label products are required to contain an optical brightener responsive to 365 nm UV light, and whether there are any specific requirements regarding its location or coverage within the label construction. Additionally, would BEP consider accepting the label material manufacturer's published technical data and certification as the basis for demonstrating compliance with this requirement?

Answer 59. The requirement of optical brightener is applied to all label stock. A label material manufacturer’s published technical data sheet is acceptable as evidence for meeting this requirement.

Question 60. Bundle Label Dimensional Tolerance The solicitation revises the bundle label dimensional tolerance from ±2 mm to ±1 mm. Weber has successfully supplied these products under the previous ±2 mm requirement. Would BEP consider maintaining the existing ±2 mm tolerance, or provide the functional justification for the revised ±1 mm requirement?

Answer 60. This requirement is enhanced to provide consistency on bundle label size. The revised requirement of ±1 mm tolerance aligns with general label industrial standards.

Question 61. Print Density Requirement The solicitation introduces a minimum reflection optical density requirement of ≥0.95. Since barcode performance is already evaluated through verification standards and different printing technologies (e.g., thermal transfer and inkjet) may produce varying density levels while meeting barcode requirements, would BEP consider revising or removing this requirement and relying on barcode verification criteria to assess print quality and scanability?

Answer 61. The requirement of ink density is independent from barcode verification.

Question 62. Label Opacity Requirement The solicitation introduces expanded substrate opacity requirements. Would BEP consider accepting the label material manufacturer's published opacity value, as stated on the material technical data sheet, as the standard for opacity compliance? Since the functional purpose of the opacity requirement is to support barcode readability and contrast, would BEP also consider evaluating opacity in conjunction with barcode verification and scanability performance?

Answer 62. Substrate opacity shall be evaluated in accordance with ISO/IEC TR 19782. The finished barcode symbol shall meet the applicable print-quality requirements of ISO/IEC 15416:2025.

Question 63. For a nonmanufacturing prime proposing direct shipment from a U.S. small-business manufacturer, what evidence would BEP require to establish compliance with the normal-trade and ownership/possession requirements in 52.219-33? (Redacted) has not previously supplied currency labels and does not claim it already satisfies those requirements.

Answer 63. Vendor must provide documentation that the company meets the nonmanufacturing rule per see #34. Requirements (c)(1)(i)-(iii).

Question 64. Section L permits information about major subcontractors and requires two relevant references. May both references, the manufacturing-site/sample evidence and the manufacturer's quality procedures support a newly formed reseller prime with no comparable company performance, alongside the prime's own contract-administration quality plan? Or must any of that experience be held by the prime itself?

Answer 64. See #36 answer.

End of Page

Standard Form 30 - Currency Labels.pdf
Standard Form 30 - Currency Labels...pdf
Question and Answer Final.pdf

Question and Answer.pdf

File details come from the government source that posted it. Updated .