20260122 Dodgeville Public Library Casegoods Bid Package.pdf

Dodgeville Public Library 3757-004-00 – Custom Casegood Package January 22, 2026 00000GLOCov - 1

Dodgeville Public Library

139 S Iowa St Dodgeville, Wisconsin 53533

Project Manual

Custom Casegoods Package

January 22, 2026

Hammel, Green and Abrahamson, Inc.

333 East Erie Street

Milwaukee, Wisconsin 53202 Erica Frederiksen, 414-278-3359

HGA Commission Number 3757-004-00

© 2023 HGA, Inc.

Dodgeville Public Library Table of Contents 3757-004-00 – Custom Casegood Package January 22, 2026 00110 - 1

TABLE OF CONTENTS

FURNITURE, FIXTURES AND EQUIPMENT

CUSTOM CASEGOODS PACKAGE

DIVISION 0 BIDDING REQUIREMENTS, CONTRACT FORMS AND CONDITIONS OF CONTRACT

00010 Table of Contents 00012 Key Contacts 00400 Bid Form

DIVISION 1 GENERAL REQUIREMENTS

01330 Submittal Procedures 01700 Contract Closeout 01740 Warranties

DIVISION 12 FURNISHINGS

12700 Custom Library Casegoods

LIST OF DRAWINGS

Shelving & Casegoods Plan – Main Level Shelving & Casegoods Plan – Lower Level CAT-1 Detail (Catalog Stand) CAT-2 Detail (Catalog Stand) EB-1 Detail (Easy Bins) SC-1 Detail (Self-Check Stand)

END OF SECTION

Awarded Vendor expected to comply with respective grant conditions and requirements:

Wisconsin Flexible Facilities Program (FFP) Project Contract Terms & Conditions https://energyandhousing.wi.gov/Documents/Flexible%20Facilities/FFP-03-03%20FFP%20Project%20Contract%20Insertion.pdf

Dodgeville Public Library Key Contacts 3757-004-00 – Custom Casegood Package January 22, 2026 00012 - 1

SECTION 00012

KEY CONTACTS

Interior Designer:

Hammel, Green and Abrahamson, Inc.

333 East Erie Street Milwaukee, Wisconsin 53202

Senior Interior Designer:

Erica Frederiksen Phone: (414) 278-3359 Email: efrederiksen@hga.com

END OF DOCUMENT

mailto:efrederiksen@hga.com

FURNISHINGS FOR PROPOSAL FOR:

Dodgeville Public Library Customs Casegoods Package

Shelving + Casegoods

139 S Iowa St

Dodgeville, Wisconsin 53533

VENDOR: ___________________________________________

(1)

(2)

(3)

(4)

COMMENCEMENT AND COMPLETION OF WORK: If the undersigned is notified of the acceptance of this quote within 30 days after the date of proposal opening, they agree to deliver shelving and accessories and canopy tops/end panels in accordance with the contract schedule with shelving install completed in August, 2026. Specific date in August to be determined by Owner. The

Dodgeville Public Library project is currently under construction.

SPECIFICATION GROUP LIST: This submittal contains bids on the following groups as listed.

ACCEPTANCE OF QUOTES: In submitting this quote, it is understood that the right is reserved by

Owner to accept any quotation in his best interest, reject all quotes, and to waive minor discrepancies in quoting procedure. The Undersigned will not withdraw this quote within 30 days after the date of opening of bids.

SECTION 00400

QUOTE FORM

(Submit in Duplicate)

We hereby submit our quote for SHELVING FOR THE Dodgeville Public Library to OWNER, to accomplish the Work in strict accordance with the requirements of Specifications for the Work dated

January 09, 2026 .

Dodgeville Public Library

3757-004-00 Custom Casegoods January 22, 2026 Bid Form

00400 - 1

Item Description Qty Unit Price Extended Price

CAT-1 Catalog Stand

CAT-2 Catalog Stand

EB-1 Easy Bins

SC-1 Self-Check Stand

Shipping/Freight

Installation

Total Extended Price:

Manufacturer's Bid is as specified.

Custom Casegoods Package

BID FORM

(Submit in Duplicate)

SPECIFICATION GROUP LIST: This submittal contains bids on the following groups as listed.

SPECIFIED MANUFACTURER: Custom Casegoods

Dodgeville Public Library

3757-004-00 Custom Casegoods January 22, 2026

00400 - 2

BID FORM SUMMARY SHEET

Manufacturer Extended Price Custom Casegoods (Easy Bins, Catalog Stand, Self-Check etc)

Shipping / Freight

Installation

BID TOTAL

(5)

(6)

(7) ADDENDA: Addendum instructions number(s) have been received and incorporated in this bid.

(8) If a Corporation, what is State of incorporation?

(9) If a Partnership, state full names of all partners:

Respectfully submitted, signed and sealed on the day of in the year 2026

(10) Lead times can meet project schedule with installation in August, 2026.

Vendor Name:

Address:

By: Title:

By: Title:

(Affix Corporate Seal) Date:

CONTRACT: If awarded the Contract, the Undersigned agrees to execute an agreement within the specified time Between Owner and Vendor for Furniture, Furnishings and

Equipment, for the above stated compensation and provide the specified Performance and

Labor/Material Payment bonds, if requested by the Owner.

LIEN WAIVER: Upon award of contract, Contractor is required to submit lien waiver with final invoice.

Dodgeville Public Library

3757-004-00 Custom Casegoods January 22, 2026

00400 - 3

Dodgeville Public Library Submittal Procedures 3757-004-00 Custom Casegoods January 22, 2026 01330 - 1

SECTION 01330

SUBMITTAL PROCEDURES

PART 1 GENERAL

1.1 SUMMARY

A. Section Includes: Procedures for submittals.

1.2 DEFINITIONS

A. Shop Drawings: Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor or a Subcontractor, Sub-subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.

B. Product Data: Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate materials or equipment for some portion of the Work.

C. Samples: Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.

1.3 RESPONSIBILITIES

A. Shop Drawings, Product Data, Samples and similar submittals are not Contract Documents. The purpose of their submittal is to demonstrate for those portions of the Work for which submittals are required the way the Contractor proposes to conform to the information given and the design concept expressed in the Contract Documents.

B. The Contractor shall review, approve and submit to the Architect Shop Drawings, Product Data, Samples and similar submittals required by the Contract Documents with reasonable promptness and in such sequence as to cause no delay in the Work or in the activities of the Owner or of separate contractors. Submittals made by the Contractor which are not required by the Contract Documents may be returned without action.

C. The Contractor shall perform no portion of the Work requiring submittal and review of Shop Drawings, Product Data, Samples or similar submittals until the respective submittal has been approved by the Architect. Such Work shall be in accordance with approved submittals.

D. By approving and submitting Shop Drawings, Product Data, Samples and similar submittals, the Contractor represents that the Contractor has determined and verified materials, field measurements and field construction criteria related thereto, or will do so, and has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.

E. The Contractor shall not be relieved of responsibility for deviations from requirements of the Contract Documents by the Architect’s approval of Shop Drawings, Product Data, Samples or similar submittals unless the Contractor has specifically informed the Architect in writing of such deviation at the time of submittal and the Architect has given written approval to the specific deviation. The Contractor shall not be relieved or responsibility for errors or omissions in Shop Drawings, Product Data, Samples or similar submittals by the Architect’s approval thereof.

F. The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data, Samples or similar submittals, to revisions other than those requested by the Architect on previous submittals.

G. When professional certification of performance criteria of materials, systems or equipment is required by the Contract Documents, the Architect shall be entitled to rely upon the accuracy and completeness of such calculations and certifications.

3757-004-00 Custom Casegoods January 22, 2026 01330 - 2

H. The Architect will review and approve or take other appropriate action upon the Contractor’s submittals such as Shop Drawings, Product Data and Samples, but only for the limited purpose of checking for conformance with information given and the design concept expressed in the Contract Documents. The Architect’s action will be taken with such reasonable promptness as to cause no delay in the Work or in the activities of the Owner, Contractor or separate contractors, while allowing sufficient time in the Architect’s professional judgment to permit adequate review. Review of such submittals is not conducted for the purpose of determining the accuracy and completeness of other details such as dimensions and quantities, or for substantiating instructions for installation or performance of equipment or systems, all of which remain the responsibility of the Contractor as required by the Contract Documents. The Architect’s review shall not constitute approval of safety precautions or, unless otherwise specifically stated by the Architect, of any construction means, methods, techniques, sequences or procedures. The Architect’s approval of a specific item shall not indicate approval of an assembly of which the item is a component.

1.4 SUBMITTAL ACCEPTANCE

A. "Accepted" submittals have no exceptions noted. One set of accepted submittals will be returned to Contractor. Make appropriate copies for use and distribution.

B. "Accepted as Noted" submittals have exceptions noted but resubmission is not required. Make appropriate copies for use and distribution.

C. "Not Accepted” and “Revise and Resubmit" submittals are incomplete and/or need corrections.

Complete and/or correct and resubmit until final acceptance is obtained.

D. "Not Reviewed" means submittals was not required or was provided for information only.

1.5 DISTRIBUTION

A. Contractor is responsible for duplication and distribution of accepted submittals including shop drawings. Exchange directly with subcontractors and others involved, not through Owner or Architect.

B. Make and forward two copies of "Accepted" and "Accepted as Noted" submittals (product data, equipment brochures, and shop drawings only) to the Owner immediately upon receipt of submittals from the Architect.

C. Provide and exchange submittals as needed to coordinate Work.

1.6 SHOP DRAWINGS

A. Shop drawings for custom millwork shall be submitted to architect within 30 days of contract award.

B. Shop drawings submitted without requested information will be returned to Contractor marked "Not Accepted."

C. Drawings Submittal Requirements:

1. Submit digital PDF.

2. Number in submittal sequence.

3. Drawings must be clear, sharp and readable quality acceptable to Architect/Engineer.

D. Reproducing Architect's Drawings

1. Do not reproduce Architect's drawings to serve as shop drawings except where necessary to indicate general location of a specific fabricated item.

2. If Architect's drawings are reproduced, remove extraneous notes and information from drawing before inclusion in submittal.

3. Submitted drawing should only include information intended to be reviewed and accepted.

E. Drawings that include unnecessary information will marked "Not Reviewed" or "Not Accepted" and will be returned.

3757-004-00 Custom Casegoods January 22, 2026 01330 - 3

1.7 PRODUCT DATA AND EQUIPMENT BROCHURES

A. Provide PDFs of brochures, cutsheets, etc.

B. Photo copies (in PDF form) of original brochures are acceptable except as specified above. Photo copies must be clear and readable. Unreadable or unclear photocopies will be returned "Not Accepted."

C. Provide layout drawings in PDF form where necessary for field use or as required by Architect.

D. Product Data:

1. Submit digital PDF file.

2. Additional PDFs for other contractors for purposes of information and coordination.

3. Number in submittal sequence.

4. Field verified information will be required by successful bidder at later date.

5. Provide a clear space of not less than 10 square inches for Architect's stamps.

E. Warranties:

1. Custom products are subject to implied warranties of merchant ability and fitness for use and shall be warranted against defective workmanship for a period of (1) year from the date of Substantial Completion or final acceptance.

1.8 SAMPLES AND MOCK UP

A. Samples of paint and materials, as required by specifications shall be submitted with shop drawings at time of bid.

1. Provide samples representative of actual product including finishes and other specified characteristics.

2. Submit samples per individual sections to represent wood species, grain, edgeband, base and joinery, stain and finish, and slatwall specified.

3. Post award, Submit (2) samples of 12” x 24” sample to represent wood species, grain, edgeband, base and joinery, stain and finish specified. Shop drawing for project will be requested at a later date.

a. Samples to be sent to: HGA – See Key Contact & Address

4. Project-specific shop drawings to be provided by vendor within three weeks of award.

5. Indicate type of construction and quality proposed for installation in Project.

B. Number Samples:

1. Three (3) samples unless otherwise specified.

2. If accepted samples must be returned, submit extra sample for Architect's record as requested.

1.9 CLOSE-OUT SUBMITTALS

A. Submit PDF copies of operating instructions and maintenance manuals to Owner at time of Owner's instructions.

END OF SECTION

Dodgeville Public Library Contract Closeout 3757-004-00 Custom Casegoods January 22, 2026 01700 - 1

SECTION 01700

CONTRACT CLOSEOUT

PART 1 - GENERAL

1.1 SUMMARY

A. This Section includes administrative and procedural requirements for contract closeout including, but not limited to, the following:

1. Inspection procedures.

2. Project record document submittal.

3. Operation and maintenance manual submittal.

4. Submittal of warranties.

5. Final cleaning.

1.2 SUBMITTALS

A. Preliminary Procedures: Before requesting inspection for certification of Substantial Completion, complete the following. List exceptions in the request.

1. In the Application for Payment that coincides with, or first follows, the date Substantial

Completion is claimed, show 100 percent completion for the portion of the Work claimed as substantially complete.

a. Include supporting documentation for completion as indicated in these Contract Documents and a statement showing an accounting of changes to the Contract Sum.

b. If 100 percent completion cannot be shown, include a list of incomplete items, the value of incomplete construction, and reasons the Work is not complete.

2. Submit specific warranties, workmanship bonds, maintenance agreements, final certifications, and similar documents.

3. Submit record drawings, maintenance manuals, final project photographs, damage or settlement surveys, and similar final record information.

4. Deliver tools, spare parts, extra stock, and similar items.

5. Make final changeover of permanent locks and transmit keys to the Owner.

6. Discontinue and remove temporary facilities from the site, along with mockups, construction tools, and similar elements.

7. Complete final cleanup requirements, including touch up painting.

B. Inspection Procedures: On receipt of a request for inspection, the Architect will either proceed with inspection or advise the Contractor of unfilled requirements. The Architect will prepare the Certificate of Substantial Completion following inspection or advise the Contractor of installation that must be completed or corrected before the certificate will be issued.

1. The Architect will repeat inspection when requested and assured that the Work is substantially complete.

2. Results of the completed inspection will form the basis of requirements for final acceptance.

1.3 RECORD DOCUMENT SUBMITTALS:

A. Record Drawings, Specifications and Product Data: Maintain one complete copy of the Project Manual, including Addenda. Include with the Project Manual one copy of other written construction documents, such as Change Orders and modifications issued in printed form during construction.

1. Mark these documents to show substantial variations in actual Work performed in comparison with the text of the Specifications and modifications.

2. Give particular attention to substitutions and selection of options and information on concealed construction that cannot otherwise be readily discerned later by direct observation.

3. Note related record drawing information and Product Data.

4. Upon completion of the Work, submit record Specifications to the Architect for the Owner’s records.

B. Record Product Data: Maintain one copy of each Product Data submittal. Note related Change Orders and markup of record drawings and Specifications.

Dodgeville Public Library Contract Closeout 3757-004-00 Custom Casegoods January 22, 2026 01700 - 2

C. Maintenance Manuals: Organize operation and maintenance data into suitable sets of manageable size. Combine properly indexed data in a digital PDF file. Include the following types of information:

1. Emergency instructions.

2. Spare parts list.

3. Copies of warranties.

4. Wiring diagrams.

5. Cleaning.

6. Inspection procedures.

7. Shop Drawings and Product Data.

8. Record documents.

9. Maintenance agreements and similar continuing commitments.

PART 2 - PRODUCTS

Not applicable.

PART 3 – EXECUTION

3.1 FINAL CLEANING

A. General: The General Conditions require general cleaning during construction.

B. Cleaning: Employ experienced workers or professional cleaners for final cleaning. Clean each surface or unit to the condition expected in a normal, commercial building cleaning and maintenance program. Comply with manufacturers’ instructions.

1. Complete the following cleaning operations before requesting inspection for certification of

Substantial Completion.

a. Remove labels that are not permanent labels.

b. Clean transparent materials, including mirrors and glass. Remove glazing compounds and other substances that are noticeable vision-obscuring materials. Replace chipped or broken glass and other damaged transparent materials.

c. Clean exposed exterior and interior hard-surfaced finishes to a dust-free condition, free of stains, films, and similar foreign substances. Restore reflective surfaces to their original condition. Vacuum carpeted surfaces.

C. Compliance: Comply with regulations of authorities having jurisdiction and with safety standards for cleaning. Do not burn waste materials. Do not bury debris or excess materials on the Owner’s property. Do not discharge volatile, harmful, or dangerous materials into drainage systems.

Remove waste materials from the site and dispose of lawfully.

1. Where extra materials of value remain after completion of associated Work, they become the

Owner’s property. Dispose of these materials as directed by the Owner.

End of Section

Dodgeville Public Library Warranties 3757-004-00 Custom Casegoods January 22, 2026 01740 - 1

SECTION 01740

WARRANTIES

PART 1 - GENERAL

1.1 SUMMARY

1.2 SUMMARY

A. This Section includes administrative and procedural requirements for warranties required by the Contract Documents, including manufacturers’ standard warranties on products and special warranties.

B. Disclaimers and Limitations: Manufacturers’ disclaimers and limitations on product warranties do not relieve the Contractor of the warranty on the Work that incorporates the products.

1.3 WARRANTY REQUIREMENTS

A. Related Damages and Losses: When correcting failed or damaged warranted products, remove and replace products that have been damaged as a result of such failure or that must be removed and replaced to provide access for correction of warranted construction.

B. Reinstatement of Warranty: When Work covered by a warranty has failed and been corrected by replacement or rebuilding, reinstate the warranty by written endorsement. The reinstated warranty shall be equal to the original warranty with an equitable adjustment for depreciation.

C. Replacement Cost: Upon determination that Work covered by a warranty has failed, replace or rebuild the Work to an acceptable condition complying with requirements of the Contract Documents. The Contractor is responsible for the cost of replacing or rebuilding defective Work regardless of whether the Owner has benefited from use of the Work through a portion of its anticipated useful service life.

D. Owner’s Recourse: Expressed warranties made to the Owner are in addition to implied warranties and shall not limit the duties, obligations, rights, and remedies otherwise available under the law.

Expressed warranty periods shall not be interpreted as limitations on the time in which the Owner can enforce such other duties, obligations, rights, or remedies.

1. Rejection of Warranties: The Owner reserves the right to reject warranties and to limit selection to products with warranties not in conflict with requirements of the Contract Documents.

1.4 SUBMITTALS

A. Submit written warranties to the Architect prior to the date certified for Substantial Completion. If the Architect’s Certificate of Substantial Completion designates a commencement date for warranties other than the date of Substantial Completion for the Work, or a designated portion of the Work, submit written warranties upon request of the Architect.

1. When a designated portion of the Work is completed and occupied or used by the Owner, by separate agreement with the Contractor during the construction period, submit properly executed warranties to the Architect within 15 days of completion of that designated portion of the Work.

B. Form of Submittal: At Final Completion, compile 3 copies of each required warranty properly executed by the Contractor, subcontractor, supplier or manufacturer. Organize the warranty documents into an orderly sequence based on the table of contents of the Project Manual.

C. Combine properly indexed data in a digital PDF file.

Dodgeville Public Library Warranties 3757-004-00 Custom Casegoods January 22, 2026 01740 - 2

1. When Warranted construction requires operation and maintenance manuals, provide additional copies of each required warranty, as necessary for inclusion in each required manual.

PART 2 – PRODUCTS

Not applicable.

PART 3 – EXECUTION

Not applicable.

Dodgeville Public Library Library Casegoods 3757-004-00 Custom Casegoods January 22, 2026 12700 - 1

SECTION 12700

CUSTOM LIBRARY CASEGOODS

PART 1 - GENERAL

1.1 SUMMARY

A. Section includes Library Casegoods

B. Base Bid:

1. Provide all labor, equipment and materials necessary for and incidental to the completion of delivery and installation of new furniture and moveable equipment in the quantities and configuration shown on the documents. Items include, but are not limited to, the following:

a. Children’s Bench

b. Easy Bins

c. Express Check / Catalog Stations

1.2 GENERAL REQUIREMENTS

A. Provide samples for approval by Architect:

1. Samples of all wood finishes and paint.

2. Samples of solid surface materials.

3. Samples of all plastic laminates, linoleum.

B. Installation shall not proceed until Architect has approved such samples.

C. Provide manufacturer’s written instructions for proper maintenance of finishes and furnishings.

D. Installation of new furnishings and equipment shall be coordinated with Architect. Installation to be complete by August, 2026. Specific date in August to be determined by Dodgeville Public Library.

1.3 SUBMITTALS

A. Product Data: For lumber, panel and veneer wood products, core materials, high-pressure decorative laminate and adhesive for bonding plastic laminate, solid-surfacing material, fire-retardant-treated materials, cabinet hardware and accessories, finishing materials and processes.

1. Submit data confirming wood materials comply with moisture content requirements.

B. All submittals are to be made in accordance with the requirements of Section 01330:

1. Provide multiple originals of brochures, cuts, etc if they are multi-page bound catalogs which would be difficult photocopy or they are intended to illustrate color or other appearance characteristics which cannot be adequately represented by photo copies.

2. Photo copies of original brochures are acceptable except as specified above. Photo copies must be clear and readable. Unreadable or unclear photocopies will be returned "Not Accepted."

C. Submit (3) samples of all finishes.

D. Within 30 days of the awarded contract, shop drawings showing location of each item, dimensioned plans and elevations, large-scale details, attachment devices, and other components shall be submitted to the architect.

1. Show details full size.

2. Show veneer leaves with dimensions, grain direction, exposed face, and an identification number indicated for each leaf. Identification number shall indicate the flitch and the sequence within the flitch for each leaf.

3. Include fabrication and installation details and attachment of dimensional letters to desk. Show sign mounting heights, type style, layout and dimensions. Font style to be determined.

3757-004-00 Custom Casegoods January 22, 2026 12700 - 2

E. Samples for initial selection of the following in the form of manufacturer's color charts consisting of actual units or sections of units showing the full range of colors, textures, and patterns available for each type of material indicated.

1. Shop-applied transparent finishes.

F. Samples for verification of the following:

1. Post award, two (2) samples of wood mock up in accordance with the requirements of Section

01330. Any other materials such as plastic laminate or solid surface may be sampled in smaller sizes.

2. Veneer leaves representative of and selected from flitches to be used for transparent-finished woodwork.

3. Wood-veneer-faced panel products, with or for transparent finish, 8 by 10 inches, for each species and cut finished on one side and one edge. Include at least one face-veneer seam and finish one-half of face as specified.

a. Step finish materials on sample to show and clearly define each coat.

b. Provide separate samples of unfaced panel product used for core.

G. Product certificates signed by woodwork fabricator certifying that products comply with specified requirements.

H. Qualification data for firms and persons specified in the "Quality Assurance" Article to demonstrate their capabilities and experience. Include lists of completed project names and addresses, names and addresses of architects and owners, and other information specified.

I. Warranty:

1. Custom products are subject to implied warranties of merchantability and fitness for use and shall be warranted against defective workmanship for a period of one (1) year from the date of Substantial completion or final acceptance.

1.4 QUALITY ASSURANCE

A. Fabricator Qualifications: Well established and experienced fabricator, acceptable to Owner and Architect, that employs skilled workers who custom-fabricate products similar to those required for this Project and whose products have a record of successful in-service performance. Five (5) year documented experience in the fabrication of similar project type and components; shop is located within 400 mile travel distance from project site.

1. Architect reserves the right to reject woodwork fabricator if it is Architect’s opinion that the following will not result in required quality within time required for completion:

a. Shop capacity.

b. Experience of workers.

c. Equipment or supply of material.

d. Previous performance by manufacturer has been unsatisfactory.

B. Installer Qualifications: An experienced installer who has completed finish carpentry similar in material, design, and extent to that indicated for this Project; and with a record of successful in-service performance; and one of the following:

1. Fabricator of woodwork for this Project.

2. Manufacturer-certified installer of prefabricated woodwork products.

C. Experience: Only with minimum of five (5) years documented experience in the fabrication and installation of scheduled components shall be acceptable.

D. References: Fabricator/installer to provide three project/client references including project description, photography, and scope of services provided.

E. Single-Source Responsibility: Arrange for production of interior architectural woodwork with sequence-matched wood veneers by a single firm.

F. Quality Standard: Except as otherwise indicated, comply with the following standard:

1. AWS Premium Quality Standard: “Architectural Woodwork Quality Standards” of the

Architectural Woodwork Institute for grades of interior architectural woodwork, construction, finishes, and other requirements.

3757-004-00 Custom Casegoods January 22, 2026 12700 - 3

G. Fire-Test-Response Characteristics: Provide materials with the following fire-test-response characteristics as determined by testing identical products per ASTM test method indicated below by UL, Warnock Hersey, or another testing and inspecting agency acceptable to authorities having jurisdiction. Identify fire-retardant-treated material with appropriate markings of applicable testing and inspecting agency in the form of separable paper label or, where required by authorities having jurisdiction, imprint on surfaces of materials that will be concealed from view after installation.

1. Surface-Burning Characteristics: Not exceeding values indicated below, tested per ASTM E 84 for standard time period (10 minutes).

a. Flame Spread: 75.

b. Smoke Developed: 450.

1.5 DELIVERY, STORAGE AND HANDLING

A. Protect equipment during transit, delivery, storage, and handling to prevent damage, soilage, and deterioration.

B. Do not deliver equipment until painting and similar operations that could damage, soil, or deteriorate woodwork have been completed in installation areas. If equipment must be stored in other than installation areas, store only in areas whose environmental conditions meet requirements specified in "Project Conditions."

1.6 PROJECT CONDITIONS

A. Environmental Limitations: Do not deliver or install equipment until building is enclosed, wet-work is completed, and HVAC system is operating and will maintain temperature and relative humidity at occupancy levels during the remainder of the construction period.

B. Except as otherwise required by relationships detailed on Drawings, do not deliver interior woodwork until building is sufficiently dry to ensure no damage to wood work will result.

1. Maintain minimum relative humidity less than 50 percent; in cold weather, provide heat for at least 10 days prior to delivery.

C. Environmental Limitations: Obtain and comply with equipment fabricator's and installer's coordinated advice for optimum temperature and humidity conditions for equipment during its storage and installation. Do not install equipment until these conditions have been attained and stabilized so that equipment will be within plus or minus 1.0 percent of optimum moisture content from date of installation through remainder of construction period.

D. Field Measurements: Where equipment is indicated to be fitted to other construction including connections for electrical or data access, check actual dimensions of other construction by accurate field measurements before installation, and show recorded measurements on final installation or shop drawings. Coordinate fabrication schedule with construction progress to avoid delaying the Work.

1. Verify locations of concealed framing, blocking, reinforcements, and furring that support woodwork by accurate field measurements before being enclosed. Record measurements on final shop drawings.

PART 2 - PRODUCTS

2.1 MANUFACTURERS

A. Manufacturers and products specified establish the minimum level of performance required, including interconnectivity of electrical components.

1. Manufacturer: Nigon Woodworks

Rep.: Matt Syring Telephone/Fax: (507) 282-1895 Email: msyring@nigonwoodworks.com

B. Custom library furnishings shall be constructed as described below and in the Schedule at the end of this Section.

mailto:msyring@nigonwoodworks.com

3757-004-00 Custom Casegoods January 22, 2026 12700 - 4

C. Wood veneer species, cut finish and veneer matching: walnut, quarter-sliced, blueprint matched panels with clear, transparent finish.

1. Comply with veneer matching requirements for blueprint-matched paneling.

D. Wood finish shall match Architect’s sample. All exposed surfaces feature a high quality catalyzed lacquer finish incorporating the latest technology: Chemically cross-linked surfaces insure toughness, imprint and mar-resistance, adhesion, stability against checking and chemical resistance for lasting beauty and ease of maintenance. Tops utilize a multi-step, semi-open pore finish that is hand-rubbed to a lustrous sheen. Submit description of current finish process for wood library furnishings.

E. Custom Library Casegoods

1. Bench, easy bins, express check and catalog stand shall be constructed of MDF plywood with a AA face veneer is acceptable when a veneer face is specified or plywood with an A face veneer is acceptable where plastic laminate, solid surface or linoleum is specified.

2. AWS premium grade

3. Product wood finish shall be transparent finish.

4. Construct in accordance with attached details.

5. Provide shop drawings under the provisions of Section 01330 Submittal Procedures.

2.2 WOOD PANELS

A. Wood Veneer Panels shall be constructed as described below and in schedule at the end of this section:

1. Construction:

a. Core material to be MDF board

b. Veneers to be Oak Plain-Sliced. Stain & Finish to match architect’s sample.

1) AWS Premium Grade.

2) A-Grade, blueprint, balanced, book and end matched face veneers.

c. Edges to be solid members, same species as panel veneer.

2. Construct in accordance with Details #4-8.

3. Provide shop drawings under the provisions of Article 1.4 Submittals.

B. Successful bidder shall finish wood panels: shall receive a clear transparent finish with satin finish.

C. Mock up wood panel – post award – shall be finished as specified above.

D. Ancillary Products

1. Plastic Laminate:

a. PLAM-1:

1) Manufacturer: Formica

2) Product: ColorCore2, 912C-58 Storm

3) Interior Melamine Finish: Black

b. PLAM-2:

1) Manufacturer: Arborite

2) Product: Night Mist P276 CA

2. Hardware:

a. Pull: EPCO #DP41-BL03, 3” long satin clear anodized edge pull

b. Hinges: Grass Nexis, concealed, all metal hinge. 100 degree opening (unless otherwise noted) self-closing, 3 way adjustable

1) Provide 3 per leaf over 48” high; 2 per leaf elsewhere. BHMA A 156.9 B01602

2) Provide quiet soft-cushion closers: Nexis G-Force Soft Closes.

3. Grommets:

a. CWKA-1: Doug Mockett MM3/SET - 1-7/8" MM3 Grommet - Cap & Liner Set

1) Finish Satin Chrome 26D

4. Door Locks: BHMA A156.11, E07121.

5. Casters: Heavy Duty 4” dia industrial casters, plate mounted without brake; non-marring wheels

3757-004-00 Custom Casegoods January 22, 2026 12700 - 5

PART 3 – INSTALLATION AND EXECUTION

3.1 INSTALLATION

A. Installation of woodwork shall be in accordance with AWS Quality Standards, Section 1700 – Installation of Architectural Woodwork.

B. Install woodwork fabrications and accessories according to reviewed shop drawings and manufacturer instructions.

C. Installation to be leveled to floor and /or walls using least conspicuous method.

D. Components shall be true and plum. Miter corners, countersink nails, drill holes for nail in hardwood. Notify Architect of variations between construction (installation) and plan immediately.

E. Ensure that Mechanical and Electrical items affecting this section are properly placed, complete and have been inspected by architect/designer prior to commencement of installation.

F. Cabinets: Install without distortion so that doors and drawers fit openings properly and are accurately aligned.

1. Adjust hardware to center doors and drawers in openings and to provide unencumbered operation.

a. Complete installation of hardware and accessory items as indicated.

b. Maintain veneer sequence matching of cabinets with prefinish.

2. Install screw caps where required.

G. Tops: Anchor securely to base units and other support systems as indicated

H. Touch up marred surfaces or replace component parts as necessary to eliminate evidence of damage.

3.2 ADJUSTING AND CLEANING

A. Adjust doors, drawers, hardware, fixtures and other moving or operating parts to function smoothly and correctly.

B. Clean cabinetwork, counters, shelves, hardware, fittings and fixtures.

3.3 SCHEDULE

A. Provide all items as listed in the following schedule.

Schedule for Section 12700 - Library Casegoods follows

Code: Description: Location:

CAT-1 Catalog Stand Dimensions: 25”W x 30”D x 34”H Main Level Description: 3/4” thick MDF grade MD, made with binder containing no formaldehyde with AWS standard premium grade, Plastic laminate face, sides, and door. Base cabinet shall have lock, pull, and cut-out in bottom panel for cord pass-thru. Worksurface to be plastic laminate top with square-edge in matching laminate. Top shall include grommet.

2 Units

Notes: See CAT-1 Detail

CAT-2 Catalog Stand Dimensions 36”W x 24”D x 30”H Lower Level

3757-004-00 Custom Casegoods January 22, 2026 12700 - 6

Code: Description: Location:

Description 3/4” thick MDF with AWS standard premium grade, Oak, plain-sliced veneer sides and panel legs with 1" thick solid Oak hardwood edgeband at all sides and exposed edges. Base cabinet shall have lock, pull, and cut-out in bottom panel for cord pass-thru. Work surface to be Oak, plain-sliced veneer face with 1" thick solid Oak hardwood edgeband at all sides and exposed edges. Top shall include grommet. Wood shall be stained to match architect’s sample with transparent finish.

1 Unit

Notes: See CAT-2 Detail

EB-1 Easy Bins Dimensions: 26”H x 42”W x 28”D Double faced bin Lower Level Description: 3/4” thick MDF grade MD, made with binder containing no formaldehyde with AWS standard premium grade, Oak, plain sliced veneer, sides and panel legs with 1" thick solid Oak hardwood edgeband at all sides and exposed edges with heavy duty locking casters. Wood shall be stained to match architect’s sample with transparent finish.

2 Double-Faced Units

Notes: See EB-1 Detail

SC-1 Self-Check Stand Dimensions 36”W x 30”D x 30”H Lower Level Description 3/4” thick MDF with AWS standard premium grade, Oak, plain-sliced veneer sides and panel legs with 1" thick solid Oak hardwood edgeband at all sides and exposed edges. Base cabinet shall have lock, pull, and cut-out in bottom panel for cord pass-thru. Work surface to be Oak, plain-sliced veneer face with 1" thick solid Oak hardwood edgeband at all sides and exposed edges. Top shall include grommet. Wood shall be stained to match architect’s sample with transparent finish.

1 Unit

Notes: See SC-1 Detail

Drawings follow for Section 12700 – Library Casegoods

R E

F

R E

F M

W

DN

DN

DESK

HU

TC

H

FL

AG

OPEN TO BELOW

PR

OJ

EC

TI

ON

SC

RE

EN

PERIODICALS HOLDS

NON-FICTION

AUDIO

FICTION

LA

RG

E

PR

IN

T

CARTCART

1'-6"

DIRECTOR'S

OFFICE

COMMUNITY

ROOM

STORAGE

LOBBY

VESTIBULE

MARKETPLACE

ADULT

WORKROOM

STORAGE

STUDY STUDY

LOCAL

HISTORY

BUSINESS

CENTER

INFO

COMMONS

YOUNG ADULT

BREAK ROOM

SORTING &

DELIVERIES

STAFF TOILET

WELLNESS

LARGE

MEETING

MENSWOMENS

CORR.

(NO EP OR CT) (NO EP OR CT)

EP

-1 d

EP

-1 d

EP

-1 d

EP

-1 d

CT-2d

CT-2d

REUSE OF EXIST. REUSE OF EXIST.

REUSE OF EXIST. REUSE OF EXIST.

REUSE OF EXIST. REUSE OF EXIST.

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

RE

US

E

OF

E

XI

ST

EP-2d

CT

-2 d

CT

-2 d

CT

-2 d

EP-2d EP-2d

EP-2d EP-2d EP-2d

EP-2s EP-2s CT-2s CT-2s

CAT-1CAT-1

EP-3sEP-3s CT-3s

CT-2d

EP

-2 d

EP

-2 d

CT-2du

EP

-2 du

EP

-2 du

1/8" = 1'-0"

3757-004-00

JANUARY 22, 2026

SHELVING & CASEGOODS

MAIN LEVEL

DODGEVILLE PUBLIC LIBRARY - RENOVATION

1/8" = 1'-0"1 SHELVING PLAN - MAIN LEVEL

EXISTING 42"H WOOD SHELVING DF

EXISTING 84"H WOOD SHELVING DF

SH-1d SH-1s

SHELVING REUSE - NOT IN CONTRACT

(REFERENCE ONLY)

SHELVING PACKAGE:

STEEL SHELVING LEGEND

SEE EP TAGS FOR END PANEL CODES

SEE CT TAGS FOR CANOPY TOP CODES

CASEGOODS PACKAGE:

CASEGOODS LEGEND

CAT-#

EB-1

SC-1

SH-2d SH-2du SH-2s SH-3d SH-3s

UP

LEGO SHED

STORYTIME CHILDREN'S

PLAY

CHILDREN'S

COLLECTION

ELECTRICAL

ROOM

FRIENDS OF

THE LIBRARY

OFFICE

OFFICE

STORAGE

MIDDLE GRADE

& MEDIA

BOILER ROOM

ELEV EQUIP

ROOM

TOILET

TOILET

TOILET

STORAGE

VESTIBULE

BOOK DROP

STAIR

CT-3d CT-3d

CT-3dCT-3d

CT-3d CT-3d

CT-3s

CT

-3 d

CT

-3 d

CT

-3 d

CT-3sCT-3s

CT-3s

CT

-3 s

CT

-3 s

CT

-3 s

CT

-2 s

CT-2s CT-2s

CT-2s

CT-2s

CT

-2 d

CT

-2 d

CT

-2 d

CT

-2 d

CT

-2 s

CT

-2 s

CT

-2 s

CT-2s CT-2s

CT-2s CT-3s CT-3s CT-3s CT-3s

EP-3d EP-3d

EP-3d EP-3d EP-3d EP-3d EP-3d EP-3d EP-3d

EP-3dw EP-3dw EP-3dw

EP-3d EP-3d

EP-3s

EP-3s (x2)

EP-3s

EP-3s

EP-3s

EP-3s

EP-3s

EP-3s

EP-3sEP-3s

EP-3s

EP-3s (x2)

EP-3s EP-2dEP-2d

EP-2d EP-2d

EP-2dEP-2d EP-2d

EP-2d

EP-2dEP-2d EP-2d

EP-2d EP-3s

EP-3s

EP-1s

EP-1s EP-3s EP-3s

EP-2sEP-2s EP-2s EP-2s

EP-2s EP-2s

SC-1

CAT-2

1/8" = 1'-0"

3757-004-00

JANUARY 22, 2026

SHELVING & CASEGOODS

LOWER LEVEL

DODGEVILLE PUBLIC LIBRARY - RENOVATION

1/8" = 1'-0"1 SHELVING PLAN -LOWER LEVEL

EB-1

EB-1

EXISTING 42"H WOOD SHELVING DF

EXISTING 84"H WOOD SHELVING DF

SH-1d SH-1s

SHELVING REUSE - NOT IN CONTRACT

(REFERENCE ONLY)

SHELVING PACKAGE:

STEEL SHELVING LEGEND

SEE EP TAGS FOR END PANEL CODES

SEE CT TAGS FOR CANOPY TOP CODES

CASEGOODS PACKAGE:

CASEGOODS LEGEND

CAT-#

EB-1

SC-1

SH-2d SH-2du SH-2s SH-3d SH-3s

EB-1: PLAN VIEW

EB-1: ELEVATION FRONT

EB-1: SECTION

NOTE: 1/8" RADIUS AT ALL EXPOSED EDGES

41"

12 1/2"

/2

1" 1"

EB-1: ELEVATION SIDE

/2

12 1/2"

12 1/2" 12 1/2"

4"

8"

28"

13 1/2" 13 1/2"WD VENEER

(4) 4" CASTERS

W/ BRAKES

1" SQUARE

HARDWOOD

EDGE; TOP &

SIDES, TYP.

4" X 1"

HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD EDGE;

TOP & SIDES, TYP.

4" X 1" HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD

TOP EDGE.

G R

A

IN

D

IR

E C

T

IO

N

MILWAUKEE PUBLIC LIBRARY -

MITCHELL ST BUILD OUT

906 W. HISTORIC MITCHELL STREET

MILWAUKEE, WI 53204

COMM. NO.

SCALE:

DATE:

DRAWN BY:

DETAIL:

0' -1/2" = 1'-0"

HGA

2292-022-00

04.017

EASY BINS

EB-1

DODGEVILLE PUBLIC LIBRARY

139 S Iowa St Dodgeville, Wisconsin 53533

3757-004-00

JAN 22 2026

CATALOG STAND CATALOG

CAT-1

1" SQUARE

HARDWOOD

EDGE; TOP &

SIDES, TYP.

4" X 1"

HARDWOOD

BASE, TYP.

G R

A

IN

D

IR

E C

T

IO

N

2'-1"

2'- 5"

9 1 /2"

1/ 2"

S

2'-1"

2'- 5"

9 1 /2"

9 1 /2"

2" GROMMET THROUGH

TOP COUNTER -

COORDINATE SIZE AND

PLACEMENT WITH

OWNER

VENTILATION OPENINGS

THROUGH BASE OF

CABINET, TYP.

B-1: ELEVATION FRONT

/2

12 1/2"

12 1/2" 12 1/2"

WD VENEER

1" SQUARE

HARDWOOD ED

TOP & SIDES, T

4" X 1" HARDWO

BASE, TYP.

CLEAR

9" 1" QUARTZ COUNTERTOP, EASED

CORNERS AND EDGES

1" MDF WITH MAPLE VENEER AND

1" MAPLE HARDWOOD EDGEBAND

WITH 1/8" EASED EDGE, CLEAR

FINISH

FINISH ALL EDGES & FACES OF

BACK SURFACE

SSF-1

EB-1: SECTION

4"

8"

28"

13 1/2" 13 1/2"

(4) 4" CASTERS

W/ BRAKES

GE;

YP.

OOD

1" SQUARE

HARDWOOD

TOP EDGE.

OPEN TO BACK

PANEL FOR

VENTILATION

4"

2'-

4" SOLID MAPLE

BASE

DOOR PULL, SEE SPECS

KEYED LOCK, SEE

SPECS

B

CAT-1: PLAN VIEW1

CAT-1: ELEVATION VIEW2 CAT-1: SECTION VIEW3

CAT-1

1" TOP, PLAM-2 ALL

EXPOSED FACES. SQUARE

EDGE & CORNERS INCLUDE

CWKA-1 GROMMET PER PLAN

1" MDF WITH PLAM-1 ALL

FACES, BASE & EDGEBAND.

BLACK MELAMINE CABINET

INTERIOR.

PLAM-1

EB-1: ELEVATION FRONT

EB-1: SECTION

NOTE: 1/8" RADIUS AT ALL EXPOSED EDGES

41"

12 1/2"

/2

1" 1"

EB-1: ELEVATION SIDE

/2

12 1/2"

12 1/2" 12 1/2"

4"

8"

28"

13 1/2" 13 1/2"WD VENEER

(4) 4" CASTERS

W/ BRAKES

1" SQUARE

HARDWOOD

EDGE; TOP &

SIDES, TYP.

4" X 1"

HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD EDGE;

TOP & SIDES, TYP.

4" X 1" HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD

TOP EDGE.

G R

A

IN

D

IR

E C

T

IO

N

MILWAUKEE PUBLIC LIBRARY -

MITCHELL ST BUILD OUT

906 W. HISTORIC MITCHELL STREET

MILWAUKEE, WI 53204

COMM. NO.

SCALE:

DATE:

DRAWN BY:

DETAIL:

0' -1/2" = 1'-0"

HGA

2292-022-00

EASY BINS

EB-1

DODGEVILLE PUBLIC LIBRARY

139 S Iowa St Dodgeville, Wisconsin 53533

3757-004-00

JAN 22 2026

CATALOG STAND CATALOG

CAT-2

CAT-2: ELEVATION VIEW2 CAT-2: SECTION VIEW3

1" TOP, OAK VENEER FACES, 1" OAK

HARDWOOD EDGEBAND WITH 1/8" EASED

CORNER RADIUS. WOOD STAIN TO

MATCH ARCHITECT'S SAMPLE WITH

TRANSPARENT FINISH. INCLUDE CWKA-1

GROMMET PER PLAN

1" MDF WITH OAK VENEER FACES

AND 1" OAK HARDWOOD

EDGEBAND. WOOD STAIN TO

MATCH ARCHITECT'S SAMPLE

WITH TRANSPARENT FINISH.

4'-0"

2'- 6"

1/

2"

/2

2" GROMMET THROUGH

TOP COUNTER -

COORDINATE SIZE AND

PLACEMENT WITH

OWNER

VENTILATION OPENINGS

THROUGH BASE OF

CABINET, TYP.

3FORM SCREEN WITH

VINYL LETTERING

CAT-2: PLAN VIEW1

CLEAR

9"

4"

9" H

4" SOLID MAPLE

BASE

3'-0"

SC-1

2'- 5"

4" SOLID

OAK BASE

VENTILATION OPENINGS

THROUGH BASE OF

CABINET, TYP.

CWKA-1 GROMMET

THROUGH TOP COUNTER

- COORDINATE SIZE AND

PLACEMENT WITH

OWNER

OPEN TO BACK PANEL

FOR VENTILATION.

PULL, SEE SPECS

LOCK, SEE SPECS

2'-

0"EQ

EQ

9"

EB-1: ELEVATION FRONT

EB-1: SECTION

NOTE: 1/8" RADIUS AT ALL EXPOSED EDGES

41"

12 1/2"

/2

1" 1"

EB-1: ELEVATION SIDE

/2

12 1/2"

12 1/2" 12 1/2"

4"

8"

28"

13 1/2" 13 1/2"WD VENEER

(4) 4" CASTERS

W/ BRAKES

1" SQUARE

HARDWOOD

EDGE; TOP &

SIDES, TYP.

4" X 1"

HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD EDGE;

TOP & SIDES, TYP.

4" X 1" HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD

TOP EDGE.

G R

A

IN

D

IR

E C

T

IO

N

MILWAUKEE PUBLIC LIBRARY -

MITCHELL ST BUILD OUT

906 W. HISTORIC MITCHELL STREET

MILWAUKEE, WI 53204

COMM. NO.

SCALE:

DATE:

DRAWN BY:

DETAIL:

0' -1/2" = 1'-0"

HGA

2292-022-00

EASY BINS

EB-1

DODGEVILLE PUBLIC LIBRARY

139 S Iowa St Dodgeville, Wisconsin 53533

3757-004-00

JAN 22 2026

EASY BIN

EB-1

EB-1: ELEVATION FRONT

EB-1: SECTION

NOTE: 1/8" RADIUS AT ALL EXPOSED EDGES

41"

12 1/2"

/2

1" 1"

EB-1: ELEVATION SIDE

/2

12 1/2"

12 1/2" 12 1/2"

4"

8"

28"

13 1/2" 13 1/2"WD VENEER

(4) 4" CASTERS

W/ BRAKES

1" SQUARE

HARDWOOD

EDGE; TOP &

SIDES, TYP.

4" X 1"

HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD EDGE;

TOP & SIDES, TYP.

4" X 1" HARDWOOD

BASE, TYP.

1" SQUARE

HARDWOOD

TOP EDGE.

G R

A

IN

D

IR

E C

T

IO

N

MILWAUKEE PUBLIC LIBRARY -

MITCHELL ST BUILD OUT

906 W. HISTORIC MITCHELL STREET

MILWAUKEE, WI 53204

COMM. NO.

SCALE:

DATE:

DRAWN BY:

DETAIL:

0' -1/2" = 1'-0"

HGA

2292-022-00

EASY BINS

EB-1

DODGEVILLE PUBLIC LIBRARY

139 S Iowa St Dodgeville, Wisconsin 53533

3757-004-00

JAN 22 2026

SELF-CHECK STAND SELF-CHECK

SC-1

SC-1: ELEVATION VIEW2 SC-1: SECTION VIEW3

1" TOP, OAK VENEER FACES, 1" OAK

HARDWOOD EDGEBAND WITH 1/8" EASED

CORNER RADIUS. WOOD STAIN TO

MATCH ARCHITECT'S SAMPLE WITH

TRANSPARENT FINISH. INCLUDE CWKA-1

GROMMET PER PLAN

1" MDF WITH OAK VENEER FACES

AND 1" OAK HARDWOOD

EDGEBAND. WOOD STAIN TO

MATCH ARCHITECT'S SAMPLE

WITH TRANSPARENT FINISH.

4'-0"

2' -6

1/

2"

/2

2" GROMMET THROUGH

TOP COUNTER -

COORDINATE SIZE AND

PLACEMENT WITH

OWNER

VENTILATION OPENINGS

THROUGH BASE OF

CABINET, TYP.

3FORM SCREEN WITH

VINYL LETTERING

SC-1: PLAN VIEW1

CLEAR

9"

4"

9" H

4" SOLID MAPLE

BASE

3'-0"

SC-1

2'- 5"

4" SOLID

OAK BASE

VENTILATION OPENINGS

THROUGH BASE OF

CABINET, TYP.

CWKA-1 GROMMET

THROUGH TOP COUNTER

- COORDINATE SIZE AND

PLACEMENT WITH

OWNER

OPEN TO BACK PANEL

FOR VENTILATION.

PULL, SEE SPECS

LOCK, SEE SPECS

2'- 6"