2026_Toro_Groundsmaster_3200_2WD_Mower_-_Specifications.pdf

PDF 438 KB Posted

Attached to
Toro Groundsmaster Rotary Mowers 3200 2WD, Model #31900A
Solicitation number
Quote- 26 - 156
Issued by
Pinellas County, Florida

About this file

This is a competitive procurement solicitation from the City of St. Petersburg, Florida, for the purchase of two Toro Groundsmaster Rotary Mowers 3200 2WD, Model #31900A, with no substitutions permitted. The equipment will replace two existing 2010 Toro Groundmaster mowers and will be used for mowing putting surfaces at Mangrove Bay Golf Course located at 875 62nd Avenue NE, St. Petersburg, FL 33702-7619. Each unit shall be equipped with a Toro mechanical suspension seat, a 42-pound weight kit, and a 72-inch side discharge deck featuring a 24.7-horsepower Yanmar three-cylinder diesel engine with 2WD parallel hydraulic traction, ground speeds up to 12.5 miles per hour forward and 5.5 miles per hour reverse, and adjustable cutting heights from 1 to 6 inches. The solicitation was posted on March 23, 2026, with a deadline for submitting questions on March 26, 2026, and proposal responses due on April 2, 2026, at 3:00 p.m. via the OpenGov Procurement portal. Equipment delivery must occur within four months of purchase order receipt, and the City will award the contract to a single vendor under a two-year limited warranty (or 1,500-hour warranty, whichever occurs first).

Qualified vendors must demonstrate a minimum of three years' experience providing commercial turf equipment and must be registered with the Florida Division of Corporations. The anticipated procurement value is approximately $51,403.04 for the two complete mower systems including all specified accessories. No mandatory set-asides exist for small business enterprises, women business enterprises, veteran-owned businesses, or minority business enterprises; however, vendors are encouraged to engage these categories as subcontractors through a voluntary Subcontractor Utilization Plan with no minimum participation thresholds. Vendors must comply with all applicable Florida laws, are prohibited from utilizing subcontractors with all work completed directly by the vendor, and must maintain commercial general liability insurance of at least $1,000,000 per occurrence and $2,000,000 aggregate, commercial automobile liability of $1,000,000, and workers' compensation insurance as required by Florida law. The City reserves the right to terminate the agreement for convenience upon thirty days' written notice or for default after a thirty-day cure period.

View the file

Other files

Show all 11

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

; ]ORO Groundsmaster®3200/3300

OUT-FRONT ROTARY MOWERS

F E A T U R E S A Revolution in Out-Front Rotaries.

Power & Durability Toro has been creating world-class out front rotary mowers for over 45 years.

— Powerful 24.7 HP (18.4 kW) or 36.8 HP (27.5 kW) We are continuing this legacy with the new Groundsmaster 3200/3300.

Yanmar’ EPA Tier 4/Stage V diesel engines

— Rugged 7-gauge high-strength steel rotary The Groundsmaster 3200/3300 delivers unparalleled productivity. Featuring a powerful decks. Available 601152 cm) or 72’ (183 c,iV 36.8 HP (27.5 kW) or 24.7 HP (18.4 kW) engine, CrossTrax all-wheel drive and legendary width of cut. Side and rear discharge options.

Groundsmaster decks, the Groundsmaster 3200/3300 makes quick work in even the Performance toughest terrain while deLivering an exceptional quality of cut. From the fully-adjustable

— CrossTrax all-wheel drive provides superior traction suspension seat and steering coLumn, the fingertip engine controLs and alL-season cab

— Up to 8.3(21 cm) ground clearance for model, this new mower is designed for alL-day comfort. Routine maintenance is also easy exceptional maneuverability . .

with the Groundsmaster 3200/3300. The innovative Tilt-Up Deck design makes bLade

Productivity maintenance and deck cLeaning simpLe. Additionally, all engine maintenance points are

— Innovative tilt-up deck for easy cleaning and easiLy accessible to help ensure your Groundsmaster runs smoothLy and reLiably for years.

maintenance

— Up to 15 mph (24 km/h) ground speed Productivity, comfort, reLiability. That’s the alL-new Groundsmaster 3200/3300.

— 1-6” (25—152 mm) height of cut with a simple and castor wheel and pin adjustment toro.comloutfront

— Comfortable operator platform

— Easy to access maintenance points

Versatility .

‘2.

— Rotary and Fine Cut Flail mowing decks available ‘

1I. Lv

— Year round vers’itilitywitha variety of seasonal attachments

;‘.I

-: t: I ,- T

- I cornfortable and productive all season long

—z

- I t’If) ,./•

‘Z ‘

(.‘ 1” . .

i -

I . :) .

CaU your Toro distributor at 800-803-8676

ThRO. Groundsmaster 320013300 Specifications

RADIATOR

FUEL CAPACITY

TRACTION DRIVE

ELECTRICAL

GROUND CLEARANCE

LENGTH

WIDTH

HEIGHT

WHEELBASE

WEIGHT

Rear mount, cross flow, R. tins per 1 (25 mm): 7 quart (6.6 liter) capacity Rear mount, cross flow, 8.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity

12 gallon (45 L)

2WD Paratlel hydraulic traction system. Parallel hydraulic flow Crossjrax® AWD. Series/Parallel hydraulic traction system w/ full time, hi-directional 6-wheel drive.

between the front wheel motors Parallel Series hydraulic flow hetween front and rear wheels.

powered_by_hydrostatic_pomp

Up to 12.5 MPH (20 km/h) Forward Up to 15 MPH (24 km/h) Forward Up to 5.5 MPH (8.9 km/h) Reverse lip to 6 MPH (9.7 km/h) Reverse

Up to 12.5 MPH (20 km/h) Forward Up to 15 MPH (24 km/h) Forward

Mows up to 6.1 acres/h (2.4 kectares/h) with 60” deck Mows up to 7.3 acres/h (2.9 hectares/h) with 60” deck Mows up to 7.3 acres/h (2.9 hectares/h) with 72” deck Mows op to 8.7 acres/h (3.5 hectares/h) with 72 deck

All welded tubular and formed steel

Engine mounted 350 ft. lb. )475 Nm) rated electro-magnetic P10 clutch drives 2” (5cm) telescoping shaft. Rotary deck connection allows for tip-up service position without disconnection of PTO. Optional Low RPM PTO engage feature.

Twin 2.5” (6.4 cm) hore, 1.25” (3.2 cm) rod hydraulic cylinders operate lift arms, Hydraulic counterhalance for optimum traction and stability.

Front: 23 x 10.5- 12 4-ply, Front: 23 x 10.5- 12 4-ply. Front: 24 x 12- 12, 4-ply, Rear: 16 x 6.5 - 8,4-ply Rear: 18 x 9.5-8, 4-ply Rear: 18x9.5 - 8,4-ply

Dynamic braking through hydrnstat and foot pedal. Parking Brake: Hand-actuated drum type on front left and right traction wheels

Deluxe Bolstered Seat )model 31980), Mechanical Suspension Seat (Model 31981), Air Ride Suspension Seat (Model 31982)

Hydraulic Power Steering. Tilt steering wheel released and locked by a font actuated lever

Operator step, beverage holder, control arm, and retractable seat belt are standard lofoCenteriN: Dnbnard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates coolant temps, oil pressure, alternator voltage, engine hours, (36.8 HP models, engine RPM).

Fnot-nperated pedal for forward and reverse. Manually adjustable forward speed limiter. Control arm includes hand-operated throttle, PTO switch, deck/implement lilt lower switch, ignition switch, (24.7 HP models, glow plug swifch(

7.8” (19.8 cm) traction unit only I 8.3” (21 cm) fraction unit only

107” (271.7 cm)

52” (132 cm) I 53.5” (135.9 cm)

79 (200.6 cm) with ROPS up 89 (226 cm)

52” (132_cm)

1,751 lbs. (794 kg) 1,886 lbs. (855 kg) 2,486 lbs. (1128 kg)

Factory installed, ROPS certified cab with AC and heat. Tempered curved windshield, tinted side and

Optional ROPS certified cab with heat only. Tempered curved windshield, tinted side and rear glass (50% tint); front wiper/ rear glass (50% tinf): front wiper/ washer; interior mirror and exterior side mirrors: SMV sign; road light kit and work light kit sold separately. All glass washer: interior mirror and exterior windows meets ANSI 7-26.1999 and ECE R43 side mirrors; SMV sign: road light kit and work light kit sold separately.

All glass windows meets ANSI 7-26.1999 and ECE R43

Two-year limited warranty. Refer In operators manual br further information.

Speciticatinss and design subject ro change wirheur notice.

“Assumes max snow speed and 100% ethcrency. Aclual mowing rates may vary depending on opesalen and condirions.

0ev. 1123 The Groondsmaster 3200 & 3300 are manutacruned is Tomah, wi ISO 9002 Cerlitied Plant.

SAFELY

ENGINE

GROUNDSMASIER GROUNDSMASI[R GROUNDSMASTER GROUNDSMASI[R

3200 2WD, 3200 AWD, . 3300 AWD, 3310 AWO CAB,

MODEL31900 MODEL319O1 i

MODEL319O2 , MODEL319O3

Yanmar®, 3 Cylinder, liquid cooled diesel, Power: 24.7 HP (1 8.4kw) @3000rpm, Torque peak: 50.9 ft-lbs. (69 Nm) @2100rpm. Displacement 1267cc. High Idle:

3230 rpm (no load). Remote mounted Donaldson air cleaner. Fuel filter water seperator. EPA Tier 41 Stage V compliant

Yanmar. 3 Cylinder, liquid cooled diesel, Power: 36.8 HP (27.5kW) @ 3000 rpm, Torque peak: 00.7 ft-lbs. (109.4 Nm) @ 1950 rpm. Displacement 1642. High Idle: 3150 rpm (no toad). Remote mounted Donaldson air cleaner. Fuel filter water seperator. EPA Tier 41 Stage V compliant

GROUND SPEED

MOW SPEED

MOWING RATE*

MAIN FRAME

IMPLEMENT DRIVE

IMPLEMENT LIFT

TIRES

BRAKES

SEAT

STEERING

OPERATOR AREA

INSTRUMENTATION

CONTROLS

12V maintenance-free battery with 540 cold cranking amps at 0 degrees F (-18 degrees C). 80 minute reserve capacity at 80 degrees F (27 degrees C). 40-amp alternator on 24.7 HP models, 55-amp alternator on 37,Ij HP models. Seat, PTO, liflllnwen, traction and parking brake interlock switches. Easy access to fuse panel.

SAFETY CAB

WARRANTY

ACCESSORIES LED work light kit, LED road light kit, LED beacon kit, recycles kits, slope sensor kit, heat noty cab, accessory control kit, storage box kit, USB charging kit, auxiliary hydraulic kit, hydraulic hose kit, SMV kit, storage bag kit, power harness kit

Groundsmaster 320013300 Specifications continued

CUTT)N6 DECK

CONF)GURAT)ONS

CONSTRUCTION

SERVICE POSITION

HEIGHT OF CUT

SPINDLE ASSEMBLY

CUTTER DRIVE

BLADES

BLADE TIP SPEED

DECK SUSPENSION

BELT IDLER

DECK SKID

ANTI SCALP

DECK COVERS

LIFT ARMS

SHIPPING WEIGHT

OPTIONAL ACCESSORIES

7-gauge (6.5 mm) high-strength steel top shell, 5.5” (14 cm) deep: welded deck with grass discharged on the right side A 5/16” (8 mm) thick rubber discharge I 7-gauge (4.5 mm) high-strength sleet lop shel[, 5.5” (14 cm) deep: welded deck

I with a rear rubber flap to direct clippings down through the rear of the machine chute. Adjustable baffle In control throw distance of clippings.

Culling deck can lip up to the service position from the transport position to conduct routine maintenance quickly. Driveshaft stays connected during tip up.

1”-6” (25- 152 mm) adjustable in 0.5” (12.7 mm) increments.

Ductite cast iron 9” (23 cm) diameter conical spindle housing: Dual greaseabte tapered mIter bearings: Spindle shaft is 1.25 (3.2 cm) diameter steel, splined connection between spindle shaft and pulley: Welded blade retainer plus anti-scalp cups.

Solid mounted, splioed P10-driven gearbox transfers power to three separate spindles via one “B” section belt.

Three 0.25” (6 mm) thick, 2.5” (63 mm) wide, heat-treated steel blades.

17,640 FPM (37hp 14 Engine) 17,670 FPM (37hp 14 Engine) 16,100 FPM )37hp 16 Engine) 15,960 FPM )37hp 14 Engine) 18,600 FPM )24hp Engine) 18,630 FPM )24hp Engine) 17,175 FPM (24hp Engine) 17,005 FPM )24hp Engine)

Front: fixed, independent high-strength 2” o 0.1875” (5.08 x .67 cm) wall castor arm tubes support welded heavy-dnty reinforced 0.375” (9.5 mm) high strength castor turks with 1.30” (3.5 cm) shafts. Semi-pneumatic (flat-free) 8.2” x 3.1” (20.8 x 7.8 cm) caster wheel with sealed ball bearings. Rear: vertical chain with 0.5” (1.27 cm) diameter pins.

Oreasable, spring-loaded (torsion) idler

Replaceable, bnlt-on, nun-marking IJHMW skid on both sides for rear discharge decks and on left side only for side discharge decks. Interchangeable left to right.

Anti-scalp cup located on each blade spindle. Additional anti-scalp gauge wheels.

Quick-release type latches, no tents required. Thermoplastic polyolefin reduces weight and noise.

Independent lift arms from fraction unit with counterbalance pressure set for optimum QOC and weight transfer.

450 lbs. (204 kg) 510 lbs. (231 kg) 460 lbs. (208 kg) 512 lbs. (232 kg)

Recycler kits, blade options )lnw sail, medium sail, high sail, atomic), blowout baffle Recycler kits, blade options (low sail, medinm sail, high sail, atomic)

“Specifications ond design subject to change without notice. Products depicted in this literature are tsr demonstratinn purposes only. Actual products uttered for sate may vary in use, design, required attachments ard satety matures.

See distributor fur detaits snail warranties.

““Assumes man mow speed and 1000/0 efficiency. Actuat mowing rates may nary depending on operator nod corditinrs.

The Groundsmoster 3200 & 3300 are manutactured in Tsmah,Wl 50 9002 Certitied Ptant.

nov. 1123 3

File details come from the government source that posted it. Updated .