2. Performance Work Statement (PWS) & Technical Exhibits.pdf

Ver. August 2026

PERFORMANCE WORK STATEMENT (PWS)

FOR

Field Sanitation Services Fort Indiantown Gap

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to provide portable toilets and servicing, as defined in this PWS. Vendor shall deliver portable latrines, hand wash stations and grey water holding tanks to non-permanent locations based on unit training requirements. Vendor shall place latrines in an orderly fashion in such a way as to minimize the potential for them to be tipped over during high winds. Should latrines be tipped-over or damaged due to environmental conditions, then vendor shall replace or make ready for use within 24 hours of becoming aware of the issue. Vendor shall have the capacity and ability year-round to provide up to 50 portable latrines for delivery within 48 hours after an order is placed. These latrines will potentially be utilized during peak training periods previously identified. Vendor must have the capability to fulfill, maintain and sustain orders for up to 200 portable latrines.

1.1.1 Objectives: The United States Property and Fiscal Office for Pennsylvania (USPFO-PA) proposes to establish a Field Sanitation Equipment Rental and Service Contract for the Pennsylvania Army National Guard (PAARNG). Contract will be utilized by all National Guard customers training at FTIG. The Vendor is defined as a source that is capable of supplying the following categories of rental items and services:

portable latrines and hand wash stations to include pump-outs, cleaning, refills and relocations. Other services needed as required are 250 gallon grey water storage tanks, potable clean water and waste P/U and disposal in 250 gallon increments. Contractor shall also provide Consumable (disposable) products associated with the replenishment of portable latrine and hand wash station usage to include toilet paper, hand sanitizer, liquid hand soap, and paper towels.

1.2 Background: Fort Indiantown Gap (FTIG) is the State Headquarters of the Pennsylvania Army and Air National Guard, supporting over 140 National Guard units within Pennsylvania, and numerous National Guard units from other states per year.

The approximate total of personnel supported yearly for weekend training on FTIG is 121,000 and 17,000 for Annual Training. Peak periods are weekends (Friday, Saturday, and Sunday) during Inactive Duty Training (IDT) September through November and March through May. Generally, the months of December, January, and February are slow months. Peak periods for Annual Training (AT) (15-21 continuous days) are May through August.

1.3 Period of Performance (PoP): The Period of Performance shall be a Base Period of 4 months commencing on 1 September 2026.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services between the hours of 0700-1630 on Monday through Friday unless otherwise requested/approved and coordinated with Designated personnel except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall begin and end at FTIG Range Control BLD 11-9 to ensure contractor safety and accountability. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential. Teleworking is not authorized.

1.4.1.1 Ordering Procedures: Designated personnel will provide a month-long service schedule for permanent portable toilets two weeks prior to commencement of the service month with any changes or updates to be provided to the contractor with at least 48 hours notice. On rare occasions notice may be 24 hours. Non-permanent rentals of portable toilets and other rental property will be communicated from designated personnel with at least two weeks notice. Changes or updates from the government to the contractor may be provided with 24 hours notice.

1.4.1.2 Delivery of Rental Equipment: Any deliveries that are made to the wrong location due to the fault of the government will be chargeable to the government. Any deliveries made to the wrong location due to the fault of the contractor will be re-located to the correct location at no additional cost to the government.

1.4.1.3 Telework: The Government does not permit the contractor to telework in support of this requirement.

1.4.1.4 Unscheduled gate closures by the FTIG Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.5 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times, and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 Washington’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer NLT 10 days after contract award. After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Installation Access and Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the KO. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by

Department of War (DoW), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 N/A

1.4.5.1.1 N/A

1.4.5.1.2 N/A

1.4.5.1.3 N/A

1.4.5.1.4 N/A

1.4.5.1.5 N/A

1.4.5.1.5.1 Failure to comply with these requirements may result in withholding of final payment.

1.4.5.1.6 N/A

1.4.5.2 For contractors that do not require a CAC, but require access to a DoW facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.4.5.3 Awareness Training (AT) Level 1: All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level 1 training within 30 calendar days after contract start date and within 30 calendar days of new employees commencing performance. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the KO within 15 calendar days after completion of training by each employee or subcontractor personnel. AT Level 1 awareness training is available at the following website:

https://jko.jten.mil/courses/atl1/launch.html.

1.4.5.4 iWATCH Training: N/A

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoW organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoW has authorized the military departments to conduct COMSEC https://jko.jten.mil/courses/atl1/launch.html monitoring and recording of telephone calls originating from, or terminating at, DoW organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoW information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 N/A

1.4.5.6.1 N/A

1.4.5.6.2 N/A

1.4.5.6.3 N/A

1.4.5.6.4 N/A

1.4.5.6.5 N/A

1.4.5.7 N/A

1.4.5.8 N/A

1.4.5.9 N/A

1.4.5.10 N/A

1.4.5.11 OPSEC Training: In accordance with AR 530-1, Operations Security, new contractor employees shall complete Level I OPSEC training within 30 calendar days of their reporting for duty and annually thereafter. The contractor shall submit certificates of completion for each contractor employee to the KO within 15 calendar days after completion of training. Level 1 OPSEC training is available at https://securityawareness.usalearning.gov/opsec/index.htm.

1.4.5.12 OPSEC SOP/Plan: N/A

1.4.5.13 N/A

1.4.5.14 N/A

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control.

1.4.6.1.1 N/A

1.4.6.1. N/A

1.4.6.1.3 N/A

1.4.6.2 Lock Combinations: N/A

1.4.7 Special Qualifications: The contractor shall ensure all employees possess all required licenses for operating motor vehicles and any associated equipment used in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors.

Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified, and otherwise qualified to provide services.)

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5.

The KO and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the KO or contract specialist to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed.

1.4.10.1 N/A

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12 Contractor Travel N/A

1.4.13 Data Rights N/A

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Phase In / Phase Out Periods N/A

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms

AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoW Department of War FAR Federal Acquisition Regulation FTIG Fort Indiantown Gap GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer

NGB National Guard Bureau OCI Organizational Conflict of Interest PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SSN Social Security Number TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

N/A

3.1 Property: N/A

3.2 Materials: N/A

3.3 Equipment: N/A

3.4 Services: N/A

3.5 Utilities: N/A

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E): N/A

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 Secret Facility Clearance: N/A

4.3 Contractor Security Clearance: N/A

5.0 Requirements: The contractor shall:

5.1 Vendor shall provide portable toilets at FTIG.

5.1.1 Permanent portable toilet locations are as follows: Reference Technical Exhibit 2 for permanent latrine locations and quantities.

5.1.2 Vendor shall service portable toilets: Regularly service the portable latrines to meet the Portable Sanitation Association International (PSAI), the Occupational Safety & Health Administration (OSHA), and the American National Standards Institute (ANSI) standards. Servicing will include the following actions and schedules:

5.1.3 Pump waste out of the latrine holding tank, and properly dispose of it at a licensed waste water treatment facility.

5.1.4 Refill the portable latrine holding tank with liquid deodorizer. Liquid deodorizer must be formaldehyde-free and biodegradable.

5.1.5 Clean and sanitize the interior of the portable latrine to include all surfaces users may come into direct physical contact. Clean the exterior of the latrine when it becomes soiled.

5.1.6 Restocking all consumables in the portable latrine to include a minimum of two rolls of toilet paper and refilling the hand sanitizer reservoir.

5.1.7 Contractor is responsible for removing any debris eg. toilet paper strewn about the area due to portable toilet that has been blown over. Any area debris that is the fault of the government will be the government’s responsibility.

5.1.8 Latrines services will be conducted on Mondays, Wednesdays and Fridays.

Latrine services will be scheduled during the request process as directed by designated personnel.

5.1.9 Non-Permanent latrines will be serviced by the service schedule or during the request process as directed by designated personnel.

5.2 Vendor shall provide hand wash stations as needed.

5.2.1 Vendor shall regularly service the hand wash stations to meet PSAI, OSHA and ANSI standards. Servicing will include the following actions

5.2.2 Pumping grey water from waste holding tank, and properly disposing of it at a licensed waste water treatment facility. Re-fill the hand wash station fresh water holding tank with potable water. Restock all consumables in the hand wash station to include paper towels and refilling the liquid soap dispenser. Clean all exterior surfaces of the hand wash station.

5.2.3 Latrines will be serviced by the service schedule or during the request process as directed by .

5.3 Vendor shall provide and replenish consumable products associated with portable toilets and hand wash stations

5.3.1 Replenishment of portable latrine and hand wash station usage to include toilet paper, hand sanitizer, liquid hand soap, and paper towels.

5.4 Vendor will regularly service the 250 gallon grey water holding tanks to meet PSAI, OSHA and ANSI standards. Servicing will include the following actions:

5.4.1 Pumping grey water out of the holding tank, and properly disposing of it at a licensed waste water treatment facility. Cleaning the exterior of the grey water holding tank when soiled. Grey water holding tanks will be serviced on a set schedule.

5.4.2 Grey water holding tanks will be serviced by the service schedule or during the request process as directed by and as needed when coordinated by the FTIG Training Center Supply Sergeant.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation M https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement M http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars Joint Travel Regulation (JTR) NA https://www.defensetravel.dod.mil/site/travelreg.cfm

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020)

NA http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-2 Personal Identity Verification (PIV) of Federal Employees and Contractors

(paragraph 9)

August 2013 A http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201 -2.pdf

DoDM 5200.2 Procedures for the DoD Personnel Security Program

(PSP)

04/03/2017 NA https://www.esd.whs.mil/Directives/issuances/dodm/

Homeland Security Presidential Directive (HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 A https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and

Civil Liberties Programs

01/29/2019

A https://www.esd.whs.mil/Directives/issuances/dodi/ https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars http://www.esd.whs.mil/Directives/issuances/dodm http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodi/

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 A https://www.esd.whs.mil/Directives/issuances/dodm/

AR 25-2

Information Assurance

04/04/2019

A http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 530-1

Operations Security

09/26/2014 A http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 525-13

Antiterrorism

12/09/2019 A http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

AR 381-12

Threat Awareness and Reporting

Program (TARP) (Section II, ¶ 2-4.b)

06/01/2016 A http://armypubs.army.mil/ProductMaps/PubForm/AR .aspx

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website I-9

Employment Eligibility Verification 10/21/2019 https://www.uscis.gov/sites/default/files/files/form/i-9.pdf

DD 441

Department of Defense Security Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms0001- 0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective Performance Standard Acceptable Quality

Levels (AQL) Surveillance Method / By

Whom

5.1.2 Cleaning and Servicing

Portable Toilets.

Meets the standard on

80% of randomly sampled portable toilets

Periodic Inspection / 11-91 Warehouse Supervisor

5.1.2 Portable Toilet Cleanliness No more than 2

validated complaints per 30-day period

Customer Feedback/Complaints

5.2.2 Cleaning and Servicing Hand

Wash Stations

No more than 2 validated complaints per 30-day period

Customer Feedback/Complaints

5.3 Consumables No more than 2

validated complaints per 30-day period

Customer Feedback/Complaints http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx https://www.uscis.gov/sites/default/files/files/form/i-9.pdf http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm https://www.esd.whs.mil/Directives/forms/dd0001_0499/

5.4 Grey water holding tanks No more than 2

validated complaints per 30-day period

Customer Feedback/Complaints

TECHNICAL EXHIBIT 2

Permanent Locations and Quantities

ITEM Location/QTY QTY 1 Range 2 1 2 Range 3-4 1 3 Range 5-5a 1 4 Range 6 1 5 Range 7 1 6 Range 8Z 1 7 Range 8Q 1 8 Range 9Z 1 9 Range 9Q 1 10 Range 10 1 11 Range 11 1 12 Range 12 1 13 Range 13 1 14 Range 13A 1 15 Range 14 1 16 Range 14A 1 17 Range 19 1 18 Range 30 6 19 Range 31 1 20 Range 33 1 21 Range 34 1 22 Range 35 1 23 Range 36 1 24 Range 37 1 25 Range 38 2 26 Area 15, PT Site 1 27 Ammo Holding Area 2 28 ASP Guard Shack 1 29 Blue Mountain Track 1

30 BLD 3-100 2

31 Demo B 1 32 Demo D 1 33 Museum 1 34 Stickler Field 1

35 TA A-31 4

36 USO 1

37 ASP SAW Bunker 1 38 ASP Residue

Building

39 ASP Area (Sinks) 3 Sinks

40 BLD 8-83 2

41 Area 12 Picnic 2 42 Building 11-91 1

1.4.5.1 N/A