2. Performance Work Statement.pdf

STATEMENT OF WORK

AIRCRAFT PROTECTIVE ENVELOPE SERVICES

for

NAVAL AIR STATION LEMOORE, CA

1. General. Perform inspection and repairs to existing Big Top sunshades, tent sunshades, blast shields and lightning protection, and tension fabric shelters (hangar).

1.1. Introduction. This Statement of Work covers contracting professional services to annually inspect and perform routine maintenance to the existing Aircraft Protective Envelopes installed on Naval Air Station Lemoore flight line in Lemoore, CA.

1.2. Objectives. Perform annual inspection and routine preventative maintenance for 206 existing 70x70x30.5 Big Top sunshades, 60 Big Top Sunshades, 12 Creative tent sunshades, one 162x160 enclosed NAMCE hanger, and one 162x350 NACME hangar.

waiting/reception area.

1.3. Scope of Work.

1. Provide yearly inspection and maintenance of 206 existing 70x70x30.5 Big Top sunshades.

Maintenance items to be performed shall include the following:

Tightening / adjustment of cable bracing as required.

Tightening of any loose bolts Tensioning of covers as required.

Tightening of cover end flap cables as required Replace UP TO 20 truss bolts per shelter if required.

Replace UP TO 20 cover tension nuts per shelter if required.

Replace UP TO 2 cables per shelter if required.

Replace UP TO 2 turnbuckles per shelter if required.

Patch any cover holes or tears that are less than 6” in length.

2. Provide yearly inspection of blast shields and lightning protection hardware on 60ea Big Top sunshades.

Inspect and tighten blast shield bolts as required.

Inspect and tighten lightning protection hardware.

UL inspections / reinspection are NOT included.

3. Provide yearly inspection of 12 Creative tent sunshades.

Maintenance will be limited to tightening of loose bolts and cables.

4. Provide yearly inspection of 1ea 162x160 enclosed NAMCE hanger.

Tightening / adjustment of cable bracing as required.

Tightening of any loose bolts Tensioning of covers as required.

Tightening of cover end flap cables as required Replace UP TO 60 truss bolts per shelter if required.

Replace UP TO 60 cover tension nuts per shelter if required.

Replace UP TO 2 cables per shelter if required.

Replace UP TO 2 turnbuckles per shelter if required.

Patch any cover holes or tears that are less than 6” in length.

5. Provide yearly inspection of 1ea 162x350 NACME hangar.

Inspection will be limited to the following due to the presence of interior liners.

Tightening of side cable bracing as required.

Inspect and tighten all bolts within 8’ of the ground.

Inspect areas above 8’ every 20’+- and access and tighten bolts as required.

Tensioning of covers as required.

Tightening of cover end flap cables as required Replace UP TO 100 truss bolts per shelter if required.

Replace UP TO 100 cover tension nuts per shelter if required.

Replace UP TO 2 cables per shelter if required.

Replace UP TO 2 turnbuckles per shelter if required.

Patch any cover holes or tears that are less than 6” in length.

1.4. Quality Assurance Surveillance Plan (QASP)

Task Performance Objective

Performance Standards

Frequency Acceptable Quality Level

(AQL)

Surveillance Method

1.4 Program Manager

inspection / walk-through

As specified in paragraph

1.3 of PWS

Annual As specified in paragraph

1.3 of PWS

Unannounced Inspection once Yearly

Receiving Customer Feedback

2. Place of Performance/Hours of Operation.

2.1.1. Place of Performance: NAS Lemoore Flight Line

Reeves Blvd, Bldg 210, 240, 270 300, 330, 360 Lemoore, CA 93246

2.1.2. Hours of Operation: 0730 to 1530 PST Monday to Friday excludes Federal Holidays.

3. Point Of Contact:

4. Security. Performance of services is unclassified, place of performance is within a restricted area. The Contractor shall comply with all applicable security requirements, abide by direction given by Military Police or other security personnel, and adhere to installation traffic laws. The Contractor shall be responsible for obtaining the necessary admittance privileges to the installation/place of performance. The Contractor shall be required to coordinate with the appropriate base security officials for issuance of employee identification badges prior to starting work. When required the TPOC will sponsor contractor employee installation and flight line access requirements.

5. Government Furnished Items. N/A

6. Deliverables and Reports. The contractor shall provide a Monthly Status Report by the 15th of the following month to the TPOC in contractor format which provides the following information:

6.1. Contract/delivery order number and date.

6.2. Summary of sunshades, tents and lighting protection hardware inspected and/or repaired during reported month.

6.3. Problems/barriers encountered impacting ability to perform inspection/repairs