2-Demolition RFP with Hazardous Materials Reports - 09042025.pdf

REQUEST FOR BIDS

Demolition of Three Houses

Salt Lake City Community Reinvestment Agency

September 4, 2025

INTRODUCTION

The Salt Lake City Community Reinvestment Agency (CRA) is soliciting sealed competitive bids for the demolition of three single-family houses along with their associated outbuildings.

The full scope of work is described below.

BID SCHEDULE

• Bid Publication: September 4, 2025

• Pre-bid Meeting: September 12, 2025

• Deadline for Questions: September 19, 2025

• Deadline for Bids: September 26, 2025

• Anticipated Award Notification: October 3, 2025

PRE-BID MEETING

The CRA’s PROJECT MANAGER will host a pre-bid meeting where we will visit each of the properties and allow access to the structures. Questions and comments will be fielded from attending contractors and written responses sent to all bidders. This meeting will be held at

10:00am on Friday, September 12. Interested bidders will meet together, beginning with the property located at 42 South 600 West in Salt Lake City. Site visits to the other two properties will directly follow.

ATTACHED DOCUMENTS

Scope of Work

Hazardous Materials Reports

BID SUBMITTAL INSTRUCTIONS

• Company – Please describe your business and its demolition experience

• Personnel – Please indicate the key employees who will be working on this project and provide their professional training and experience

• Schedule – Please outline your proposed permitting, demolition, cleanup, and closeout schedule

• Price – Please provide a line item bid amount showing the cost per house and the total cost.

• Certificate of Insurance – Please provide a current certificate of insurance o The CRA requires its contractors to carry the following insurance policies issued by a provider currently rated A- or better by A.M. Best Company or listed in the

US Treasury Department’s current Listing of Approved Sureties (Department

Circular 570), as amended:

▪ Workers compensation as required by State law

▪ Commercial general liability with $1M per occurrence and $2M general aggregate; CRA will be an additional insured

▪ Commercial automobile liability insurance with a combined single limit no less than $1M per occurrence or $500k per person, $1M per occurrence, and $250k property damage

▪ Professional liability insurance of $1M per claim and $1M annual aggregate

Bid proposals shall not surpass 15 pages in length.

Please email all bids to Austin Taylor at austin.taylor@slc.gov by 5pm Mountain Time on

September 26, 2025. Bids received after this time will not be accepted.

SCOPE OF WORK

PART 1 – GENERAL

1.1 WORK COVERED BY CONTRACT DOCUMENTS

A. The project Base Bid consists of demolition of three houses and associated outbuildings down to natural ground level in preparation for future development.

B. The following description is an outline of the work to be accomplished. The Scope of

Work is as indicated in the Contract Documents (such as drawings and specifications) prepared by the Salt Lake City Community Reinvestment Agency (CRA).

C. Base Bid: Demolition and removal of all existing buildings down to the lowest level of the structure, including complete removal of all above-ground and below-ground elements such as superstructures, basements, cellars, retaining walls, foundations, and footings. Demolition will proceed down to natural ground level. Demolition will include removing all utility lines and capping at the main. Following demolition, all excavated voids resulting from the removal of substructures shall be backfilled using suitable, clean, and compactable fill material and lot should be graded to match surrounding levels. All excavations requiring replacement fill of 24" or more shall be compacted to 90% maximum dry density. Independent, third-party testing is required following compaction of the first lift to verify compaction methods are sufficient to achieve the required density. CONTRACTOR will be responsible for public safety on and surrounding project properties, providing appropriate barricades or fencing for pedestrian safety during demolition. If the demolition is to take more than 10 days on any site, CONTRACTOR shall install a temporary fence around the perimeter of the property.

D. Additive Alternate: None currently.

1.2 CONTRACT METHOD

A. Perform the Work under a single lump sum contract.

mailto:austin.taylor@slc.gov

1.3 CONTRACTOR USE OF PREMISES

A. CONTRACTOR shall limit use of the premises for Work, for temporary refuse storage, for temporary dumpster storage, and for access, to allow:

a. Continued operation of any adjacent buildings and businesses.

b. Public access to adjacent properties and sidewalks around the property perimeter.

B. CONTRACTOR ACCESS AND RESPONSIBILITIES

a. CONTRACTOR access to the site during demolition shall be as follows:

1. 42 S 600 W: large trucks and equipment shall enter site via 600 West

2. 937 S 200 W: large trucks and equipment shall access site via 200 West and shall cross the light rail tracks as few times as possible; trucks are encouraged to enter the site from the south and leave to the north via 200 West

3. 864 W 400 S: large trucks and equipment shall access site via 400 South

C. CONTRACTOR shall coordinate use of the premises (including electrical power, potable water, and staging the site) under direction of the CRA and the PROJECT MANAGER.

D. All applicable Storm Water Pollution Prevention Plan (SWPPP) measures shall be deployed to minimize silt runoff, mud, and contaminated water from leaving the site.

This shall also include daily policing and sweeping public streets and sidewalks as needed.

E. CONTRACTOR shall assume full responsibility for protection and safekeeping of any materials and adjoining surfaces (on or off site) under this Construction Contract. As applicable, CONTRACTOR shall protect all un-affected surfaces from physical damage, spills, splatters, and chemical contamination that may occur during demolition. Perimeter sidewalks are to remain as-is and undamaged. Any sidewalk paving or curb and gutter damaged during demolition shall be replaced by the Contractor.

F. CONTRACTOR shall obtain and pay for use of additional storage or work areas needed for operations under this Construction Contract.

G. All permit fees required by Salt Lake City or its entities shall be applied for and paid by the CONTRACTOR and reimbursed by the City. All other permits required by the EPA, Salt Lake County Health Department, the State of Utah, or other non-City entities are the responsibility of the CONTRACTOR, shall be included in their bid proposal, and shall be paid by the CONTRACTOR.

H. CONTRACTOR shall install temporary barricades to protect the sidewalk and pedestrians from demolition activity and building materials.

I. CONTRACTOR shall install temporary fencing around the perimeter of the properties if the demolition is expected to take more than 10 days per site to complete.

J. CONTRACTOR to provide chemical toilet facilities for construction worker use during the duration of the project. Chemical toilets shall be locked at the end of each day’s activities. Impervious protection or a leak-proof containment pan shall be maintained under chemical toilet facilities to minimize the chance of cleaning solutions and human waste contaminating surrounding surfaces. Chemical toilets shall be serviced at frequent enough intervals as to limit offensive odors and maintain sanitary conditions. Chemical toilet facilities shall include hand sanitizer or hand wash stations for worker use. Location of chemical toilet to be approved by the CRA representative for this project.

K. CONTRACTOR shall post all applicable OSHA warning signs as required.

L. All concrete shall be demolished and removed from site. This includes all building footings and foundations, all interior sidewalk paving, and all slabs-on-grade. After removal, the excavations shall be filled in with structural, non-expansive road-base fill or granular backfill barrow (Class A-1, A-1-a or A-1-b. All excavations requiring replacement fill of 24" or more shall be compacted to 90% maximum dry density.

Independent, third-party testing is required following compaction of the first lift to verify compaction methods are sufficient to achieve the required density. The intent is to leave the site in a leveled condition with no monolithic concrete chunks, potholes, low spots, or truck tire ruts. No additional fill shall be imported to the site beyond what is needed for filling in the excavations. Upon completion of the work, CONTRACTOR shall clean up any remaining debris and remove from site, including sweeping all sidewalk areas and curb and gutters affected by or dirtied by the work.

M. CONTRACTOR shall remove all utility lines and connections and cap them at the main line.

N. Project duration and site access for performing demolition activities shall be finalized before the contract is executed.

O. Award of contract may be influenced by the schedule duration proposed by all Bidders, included with their bid proposal.

1.4 OCCUPANCY DURING DEMOLITION

A. The sites are currently vacant with all structures empty and unoccupied.

(hazardous materials reports to follow)

PRE DEMOLITION ASBESTOS

SURVEY & ASSESSMENT

OF

Single Family Home

42 South 600 West Salt Lake City, Utah 84101

March 25, 2025

Prepared for:

Salt Lake City Corporation

Prepared by:

ACM Environmental

25 North 400 West Ste 6 North Salt Lake, Utah 84054

(801) 664-1866 State of Utah Company Certification ASBC-697

Inspectors:

Anthony Pena

State of Utah DAQ Inspector Certification #ASB-5355

TABLE OF CONTENTS

1.0 INTRODUCTION

2.0 EXECUTIVE SUMMARY

3.0 SAMPLE LOG

4.0 SAMPLING METHODS

5.0 RECOMMENDATIONS

6.0 LIMITATIONS AND EXCLUSION OF WARRANTY

ACM Environmental performed a pre-demo asbestos inspection at a single family home and detached barn & shed located at 42 South 600 West Salt Lake City, Utah 84101 on March 25, 2025. The inspection consisted of a visual assessment and bulk sampling of the suspect asbestos containing materials. 32 bulk samples of suspect asbestos containing materials were taken and submitted to EMC Laboratories for analysis by Polarized Light Microscopy (PLM).The inspection was conducted by Anthony Pena who is Utah Accredited Asbestos Building Inspectors. A copy of the certification is included.

No asbestos detected in 32 bulk samples. Please see 3.0 sample log.

NESHAP - REGULATED

ASBESTOS-CONTAINING MATERIALS (R-ACM)

1. Friable asbestos material (>1% asbestos and can be crumbled, pulverized or reduced to powder by hand pressure) Thermal system insulation (TSI)* (Joints) Textured wall & ceiling materials (TCM)* Spray-on insulation or fireproofing* Blown-in insulation* Ceiling tiles/panels* Plaster, gypsum board, gypsum board joint compound* (Wall System, Plaster Surfacing) Cloth materials* Paper materials Electrical wiring insulation* Sink undercoating (loose)* Other* (Debris & Boiler)

2. Category I ACM which has become friable

Packings Gaskets Resilient floor coverings (floor tile and sheet vinyl) Asphalt roofing products

3. Category I ACM that will be or has been subjected to sanding, grinding, cutting or abrading

Gaskets

4. Category II ACM that has a high probability of becoming or has become friable in the course of demolition or renovation operations Asbestos cement materials (transite)* Asphalt, tar and rubber-base ACM products other than roofing products* Non-asphalt and non-paper roofing products* (Felt) Paint* Fire brick and/or mortar* Stainless steel sink undercoating (solid)* Encapsulated TCM* Encapsulated TSI* Mastic for floor tile, ceiling tile, cove molding, etc.* ____Other

NESHAP NON-REGULATED

ASBESTOS-CONTAINING MATERIAL (N-R-ACM)

1. 1% asbestos

Wall systems5

2. Category I Non-friable (cannot be crumbled, pulverized, or reduced to powder by hand pressure) ACM with >1% asbestos by new PLM procedure Packings Gaskets Resilient floor coverings5 (floor tile & sheet vinyl) Roofing products5

3. Category II Non-friable ACM with >1% asbestos by new PLM procedure (Category includes items meeting Category I definition but not specifically listed in that category) Asbestos cement materials (transite)* Asphalt, tar and rubber-base ACM products other than roofing products* Non-asphalt and non-paper roofing products* Paint* ____Fire brick and/or mortar Sink undercoating (solid)*

Other*

Notes:

1. (*) denotes ACM Environmetal’s interpretation of materials included in this category.

2. New PLM procedure is outlined in Appendix A, Subpart F, 40 CFR, Part 783, Section 1, Polarized Light

Microscopy.

3. The Environmental Protection Agency (EPA) National Emission Standard for Hazardous Air Pollutants

(NESHAP) asbestos revision as outlined in 40 CFR, Part 61, became effective November 20, 1990. The asbestos classification system outlined in the revision and included in this section is dynamic in nature.

Asbestos materials classified as NON-REGULATED at the time of the survey may become REGULATED due to ongoing or planned maintenance, renovation or demolition actions which can transform a material containing greater than 1% asbestos from a non-friable and NON-REGULATED to a friable and REGULATED condition. Classification of ACM in this section and in the executive summary of this report is, therefore, based on the observations of the surveyor at the time of the survey and may or may not be appropriate at later dates.

4. Maintenance, renovation, demolition, weathering, normal wear, water or other damage can alter the NON-REGULATED status of materials, and necessitate precautions required for handling them as REGULATED asbestos materials.

5. Category I non-friable materials and materials with less than one percent by point count may remain during demolition. The demolition contractor is required by OSHA to have asbestos Class II training. Contact ACM Environmental for more information and training.

3.0 SAMPLE LOG

Sample

Material

Quantity

Location

Lab Results

Regulated

By

Comments

1-A

Lath & Plaster

3,500 SqFt

Throughout:

Walls & Ceilings

None Detected Not

1-B None Detected Not

1-C None Detected Not

1-D None Detected Not

1-E None Detected Not

2-A Ceiling Tile

100 SqFt

N.W. & N.E.

Bedrooms

2-B None Detected Not

3-A

20 SqFt

N.W. Bedroom

3-B None Detected Not

4-A

Bathroom & Pantry

4-B None Detected Not

5-A

Textured Drywall

150 SqFt

Kitchen: Ceilings

5-B None Detected Not

5-C None Detected Not

6-A Drywall Joint

Compound

40 SqFt

Back Entry: Ceiling

6-B None Detected Not

7-A Wall Tile

Bathroom

7-B None Detected Not

8-A Wall Tile

75 SqFt

Kitchen

8-B None Detected Not

9-A Floor Tile

40 SqFt

Back Entry

9-B None Detected Not

10-A Stick Down Tile

160 SqFt

Kitchen & Pantry

10-B None Detected Not

11-A Sheet Vinyl

Flooring

130 SqFt

Kitchen: Buried

11-B None Detected

Not

12-A Stick Down Tile

12-B None Detected Not

13-A Sheet Vinyl

Bathroom: Buried

13-B None Detected Not

14-A Asphalt Shingle

1,910 SqFt

Roofing

14-B None Detected Not

4.0 SAMPLING METHODS

Survey procedures were based on those outlined in Title 40 Code of Federal Regulation (CFR) Part 763, USEPA Asbestos Hazard Emergency Response Act, and the Asbestos Model Accreditation Plan (effective April 4, 1994). The procedures included visual observation, physical inspection, bulk sample collection, and condition assessment of suspect ACM. The number of samples collected was based on the amount and accessibility of each homogeneous material, with consideration given for the type, age, and condition.

Samples were collected from the suspect materials to assess the presence of asbestos (or lack thereof) in building materials/systems. Each sample collected was placed into a sealable plastic bag or tub, marked with a unique sample identification code, and packaged for subsequent shipment to the laboratory for analysis. Individual sample identification consisted of a numeric code denoting the sampling media/location.

Subsequent to packaging and labeling, samples were submitted under proper chain-of-custody to EMC Labs, Phoenix, AZ. The National Voluntary Laboratory Accreditation Program (NVLAP), Lab Code 101926-0 accredits EMC Labs for asbestos analysis. Samples were analyzed via Polarized Light Microscopy (PLM) utilizing EPA Method 600/R-93/116. Please note that USEPA and OSHA regulations define an asbestos containing material as a material containing more than one (1) percent asbestos, by volume, as determined by PLM analysis. In the case of multi-layer systems (e.g., floor tile/mastic layers), the laboratory analyzed and reported each layer separately.

● No Asbestos Detected in the 32 bulk samples.

This asbestos survey and assessment was performed using procedures and a level of diligence typically exercised by professional consultants performing similar services. However, asbestos containing material can be present in a structure, but not identified using ordinary investigative procedures.

No asbestos survey can completely eliminate uncertainty regarding the presence of asbestos containing materials. ACM Environmental’s level of diligence and investigative procedures are intended to reduce, but not eliminate, potential uncertainty regarding the presence of asbestos containing materials. The procedures used for this survey attempt to establish a balance between the competing goals of limiting investigative costs, time, and building damage, and reducing the uncertainty about unknown conditions. Therefore, the determinations in this report should not be construed as a guarantee that all asbestos containing materials present in the subject property has been included in this report.

This report presents ACM Environmental’s professional determinations, which are dependent upon information obtained during performance of consulting services. ACM Environmental assumes no responsibility for omissions or errors resulting from inaccurate information provided by sources outside of ACM Environmental

No warranty or guarantee, expressed or implied, is made regarding the findings, conclusions, or recommendations contained in this report. The limitations presented above supersede the requirements or provisions of all other contracts or scopes of work, implied, or otherwise, except stated or acknowledged herein.

On March 25, 2025 Anthony Pena conducted an asbestos survey and assessment for Salt Lake City Corporation at the Property listed above. 32 bulk samples of suspect asbestos-containing materials were collected and analyzed by PLM analysis.

The following accredited inspector conducted the survey and assessment.

Inspected and Reviewed by:

Anthony Pena Date State of Utah, Division of Air Quality Inspector:

Certification Number: ASB-5355 Phone: (385) 313-6205 Email: Anthony@acmenvironmentalutah.com State of Utah, Division of Air Quality Company:

Certification Number ASBC-697

3-25-25

Asbestos Detected

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Quartz Gypsum Non-Fibrous Binder/Filler

100%

NoLAYER 1 Lath, Gray/ Brown

None Detected0328856-001 1-A

Quartz

NoLAYER 2 Plaster, White

None Detected

Quartz

Lath, Gray/ Brown

None Detected0328856-002 1-B

Quartz

Plaster, White

None Detected

Quartz

Lath, Gray/ Brown

None Detected0328856-003 1-C

Quartz

Plaster, White

None Detected

Quartz

99%

HairNoLath, Gray/ Brown None Detected0328856-004 1-D

<1%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Quartz

Lath, Gray/ Brown

None Detected0328856-005 1-E

Quartz

Plaster, White

None Detected

Carbonates Perlite

20%

Cellulose Fiber Mineral Wool

NoCeiling Tile, White None Detected0328856-006 2-A

75% 5%

Carbonates

Mineral Wool

NoCeiling Tile, White None Detected0328856-007 2-B

75% 5%

Carbonates

Mineral Wool

NoCeiling Tile, White None Detected0328856-008 3-A

75% 5%

Carbonates

Mineral Wool

NoCeiling Tile, White None Detected0328856-009 3-B

75% 5%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Mineral Wool

NoCeiling Tile, White None Detected0328856-010 4-A

75% 5%

Carbonates

Mineral Wool

NoCeiling Tile, White None Detected0328856-011 4-B

75% 5%

Gypsum Quartz

90%

Cellulose FiberNoLAYER 1 Drywall, White/ Brown

None Detected0328856-012 5-A

10%

Carbonates Mica

Joint Compound, White

None Detected

Carbonates Mica

NoLAYER 3 Texture/ Paint, White

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Gypsum

Drywall, White/ Brown

None Detected0328856-013 5-B

10%

Carbonates Mica

Joint Compound, White

None Detected

Carbonates Mica

Texture/ Paint, White

None Detected

Gypsum

Drywall, White/ Brown

None Detected0328856-014 5-C

10%

Carbonates Mica

Joint Compound, White

None Detected

Carbonates Mica

Texture/ Paint, White

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Gypsum

88%

Fibrous Glass

NoLAYER 1 Drywall, White/ Brown

None Detected0328856-015 6-A

10% 2%

Carbonates

Joint Compound, White

None Detected

Gypsum

88%

Fibrous Glass

NoLAYER 1 Drywall, White/ Brown

None Detected0328856-016 6-B

10% 2%

Carbonates

Joint Compound, White

None Detected

Carbonates

Wall Tile, White

None Detected0328856-017 7-A

Carbonates

Cellulose FiberNoLAYER 2 Mastic, Yellow

None Detected 1%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Wall Tile, White

None Detected0328856-018 7-B

Carbonates

Mastic, Yellow

None Detected 1%

Carbonates

Wall Tile, White

None Detected0328856-019 8-A

Carbonates

Mastic, Yellow

None Detected 1%

Carbonates

Wall Tile, White

None Detected0328856-020 8-B

Carbonates

Mastic, Yellow

None Detected <1%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Floor Tile, Beige/ Black

None Detected0328856-021 9-A

Carbonates

Mastic, Yellow/ Brown

None Detected

Carbonates

Floor Tile, Beige/ Black

None Detected0328856-022 9-B

Carbonates

Mastic, Yellow

None Detected

Carbonates

Stick Down Tile, White

None Detected0328856-023 10-A

Carbonates

Mastic, Yellow

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Stick Down Tile, White

None Detected0328856-024 10-B

Carbonates

Mastic, Yellow

None Detected <1%

Carbonates

80%

Fibrous Glass

NoLAYER 1 Sheet Vinyl Flooring, Beige

None Detected0328856-025 11-A

17% 3%

Carbonates

97%

Mastic, Yellow

None Detected 3%

Carbonates

Fibrous Glass

NoLAYER 1 Sheet Vinyl Flooring, Beige

None Detected0328856-026 11-B

17% 3%

Carbonates

Mastic, Yellow

None Detected 3%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Stick Down Tile, White

None Detected0328856-027 12-A

Carbonates

Mastic, Clear

None Detected 1%

Carbonates

Stick Down Tile, White

None Detected0328856-028 12-B

Carbonates

Mastic, Clear

None Detected 1%

Carbonates

Fibrous Glass

NoLAYER 1 Sheet Vinyl Flooring, Beige

None Detected0328856-029 13-A

17% 3%

Carbonates

Mastic, Yellow

None Detected 1%

Carbonates

Cellulose FiberNoLAYER 3 Mastic, Clear

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Fibrous Glass

NoLAYER 1 Sheet Vinyl Flooring, Beige

None Detected0328856-030 13-B

17% 3%

Carbonates

Mastic, Yellow

None Detected 1%

Carbonates

Mastic, Clear

None Detected 1%

Carbonates

Fibrous GlassNoAsphalt Shingle, Black None Detected0328856-031 14-A

20%

Carbonates

Fibrous GlassNoAsphalt Shingle, Black None Detected0328856-032 14-B

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0328856

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 03/31/2025

04/03/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 03/25/2025

EPA Method:

Project Name: 42 SOUTH 600 WEST- SLC CORP Submitted By: ANTHONY PENA

Address: Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

04/03/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Signatory - Lab Director - Kurt Kettler

Distinctly stratified, easily separable layers of samples are analyzed as subsamples of the whole and are reported separately for each discernible layer. All analyses are derived from calibrated visual estimate and measured in area percent unless otherwise noted. The report applies to the standards or procedures identified and to the sample(s) tested. The test results are not necessarily indicative or representative of the qualities of the lot from which the sample was taken or of apparently identical or similar products, nor do they represent an ongoing quality assurance program unless so noted. This report is for the exclusive use of the addressed client and will not be reproduced wholly or in part for advertising or other purposes over our signature or in connection with our name without special written permission. The report shall not be reproduced except in full, without written approval by our laboratory.

The samples not destroyed in testing are retained a maximum of sixty days. The laboratory measurement of uncertainty for the test method is approximately less than 1 by area percent. Accredited by the National Institute of Standards and Technology, Voluntary Laboratory Accreditation Program for selected test method(s) for asbestos. The Client/Customer supplies the following information for this report: The Project Name, Address, Collection Date/Time, Sample Collector, Job/PO Number, Client Sample Identification and Sample Location. The accreditation or any reports generated by this laboratory in no way constitutes or implies product certification, approval, or endorsement by the National Institute of Standards and Technology. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government.

Ryan McDonough Analyst -

Pre-demolition Building Inspection Form Water Quality and Hazardous Waste Bureau, Environmental Health Division

788 East Woodoak Lane; Murray, UT 84107

Phone: 385-468-3862; Fax: 385-468-3863

Salt Lake County Health Department promotes and protects community and environmental health saltlakehealth.org

Section 1: General Information

Select one: ☐ Residential ☐ Business

Address of Demolition City Inspection Date

Property Owner Name Phone Email

Demolition Permit Holder or Contractor Phone Email

Section 2: Inspection Results

Items Amount Condition

Mercury (Hg) Thermostats _________________________________ ☐ Damaged ☐ Undamaged

Hg Fluorescent Lights _________________________________ ☐ Damaged ☐ Undamaged

PCB Ballasts or Transformers _________________________________ ☐ Damaged ☐ Undamaged

Refrigeration Units containing CFCs _________________________________ ☐ Damaged ☐ Undamaged

Containers of Hazardous or Special

Waste, including Vehicle Batteries _________________________________ ☐ Damaged ☐ Undamaged

Suspect ACM (substrates sampled):

☐ Ceiling tile ☐ Ceiling texture ☐ Drywall ☐ Flooring ☐ Heat tape ☐ Insulation ☐ Roofing

☐ Window caulk ☐ Other: _______________ ☐ Other: _________________ ☐ None present

Inspector name Inspector signature PBI Reg. #

Section 3: Follow-Up Inspection Results

Have all items identified above been removed? ☐ Yes ☐ No

Inspector signature Date

Section 4: Disposition of Identified Items or Copies of Receipts

Item Name of Disposal or Recycling Facility Date Hg Thermostats _________________________________ ___________________ Hg Fluorescent Lights _________________________________ ___________________ PCB Ballasts or Transformers _________________________________ ___________________ Refrigeration Units containing CFCs _________________________________ ___________________ Hazardous or Special Waste; Batteries _________________________________ ___________________ RACM or other ACM _________________________________ ___________________

HEALTH DEPARTMENT USE ONLY

Approved by: _______________________________________ __________________

Licensed Environmental Health Scientist Date approved

PRE DEMOLITION ASBESTOS

SURVEY & ASSESSMENT

937 South 200 West Salt Lake City, Utah 84101

February 5, 2025

25 North 400 West Ste 6 North Salt Lake, Utah 84054

Inspectors:

Anthony Pena

State of Utah DAQ Inspector Certification #ASB-5355

3.0 SAMPLE LOG

4.0 SAMPLING METHODS

ACM Environmental performed a pre-demo asbestos inspection at a single family home located at 937 South 200 West Salt Lake City, Utah 84101 on February 5, 2025. The inspection consisted of a visual assessment and bulk sampling of the suspect asbestos containing materials. 31 bulk samples of suspect asbestos containing materials were taken and submitted to EMC Laboratories for analysis by Polarized Light Microscopy (PLM).The inspection was conducted by Anthony Pena who is Utah Accredited Asbestos Building Inspectors. A copy of the certification is included.

RACM

9” Floor Tile 25 Sq Ft Staircase 3% Chrysotile

No

PHOTOS

1. Friable asbestos material (>1% asbestos and can be crumbled, pulverized or reduced to powder by hand pressure) Thermal system insulation (TSI)* (Joints) Textured wall & ceiling materials (TCM)* Spray-on insulation or fireproofing* Blown-in insulation* Ceiling tiles/panels* Plaster, gypsum board, gypsum board joint compound* (Wall System, Plaster Surfacing) Cloth materials* Paper materials Electrical wiring insulation*

Gaskets

Gaskets

4. Category II ACM that has a high probability of becoming or has become friable in the course of demolition

Asbestos cement materials (transite)* Asphalt, tar and rubber-base ACM products other than roofing products* Non-asphalt and non-paper roofing products* (Felt) Paint* Fire brick and/or mortar* Stainless steel sink undercoating (solid)* Encapsulated TCM* Encapsulated TSI*

1. 1% asbestos

Wall systems5

2. Category I Non-friable (cannot be crumbled, pulverized, or reduced to powder by hand pressure) ACM with >1% asbestos by new PLM procedure Packings Gaskets XX Resilient floor coverings5 (floor tile & sheet vinyl)

Asbestos cement materials (transite)* Asphalt, tar and rubber-base ACM products other than roofing products* Non-asphalt and non-paper roofing products* Paint* ____Fire brick and/or mortar Sink undercoating (solid)*

2. New PLM procedure is outlined in Appendix A, Subpart F, 40 CFR, Part 783, Section 1, Polarized Light

Microscopy.

3. The Environmental Protection Agency (EPA) National Emission Standard for Hazardous Air Pollutants

(NESHAP) asbestos revision as outlined in 40 CFR, Part 61, became effective November 20, 1990. The asbestos classification system outlined in the revision and included in this section is dynamic in nature.

Asbestos materials classified as NON-REGULATED at the time of the survey may become REGULATED due to ongoing or planned maintenance, renovation or demolition actions which can transform a material containing greater than 1% asbestos from a non-friable and NON-REGULATED to a friable and REGULATED condition. Classification of ACM in this section and in the executive summary of this report is, therefore, based on the observations of the surveyor at the time of the survey and may or may not be appropriate at later dates.

4. Maintenance, renovation, demolition, weathering, normal wear, water or other damage can alter the NON-REGULATED status of materials, and necessitate precautions required for handling them as REGULATED asbestos materials.

5. Category I non-friable materials and materials with less than one percent by point count may remain during demolition. The demolition contractor is required by OSHA to have asbestos Class II training. Contact

1-A Texture/Surfacing

1,400 Sq Ft

Main Floor:

Ceilings Throughout

Basement:

Ceiling Throughout

1-B Texture/Surfacing None Detected Not

1-C Texture/Surfacing None Detected Not

1-D Texture/Surfacing None Detected Not

1-E Texture/Surfacing None Detected Not

2-A Drywall Joint

2,100 Sq Ft

S.W. Office, N.W. Office, N.E. Office, S.E. Storage, & Hallway Walls

Basement:

Walls Throughout

2-B Drywall Joint

2-C Drywall Joint

3-A Plaster & Gypsum

3,000 Sq Ft

Walls & Ceilings

Throughout

3-B Plaster & Gypsum None Detected Not

3-C Plaster & Gypsum None Detected Not

3-D Plaster & Gypsum None Detected Not

3-E Plaster & Gypsum None Detected Not

4-A Felt Paper & Black Mastic

50 Sq Ft

Hallway

4-B Felt Paper &

5-A Sheet Vinyl

35 Sq Ft

5-B Sheet Vinyl

6-A Sheet Vinyl

80 Sq Ft

S.W. Office &

Back Entry

6-B Sheet Vinyl

7-A 9” Floor Tile

25 Sq Ft

Staircase

Texture:

3% Chrysotile

Asbestos

OSHA

See Recommendations

7-B 9” Floor Tile Texture:

3% Chrysotile

Asbestos

OSHA

Regulated

8-A 12” Floor Tile 800 Sq Ft Basement:

Throughout

8-B 12” Floor Tile None Detected Not

9-A Window Glazing 10 Sq Ft Exterior:

Windows

9-B Window Glazing None Detected Not

10-A Asphalt Shingles

House:

Roof

Not

10-B Asphalt Shingles None Detected Not

11-A Asphalt Shingles

House:

11-B Asphalt Shingles None Detected Not

12-A Asphalt Shingles 500 Sq Ft

Garage:

12-B Asphalt Shingles None Detected Not

Accreditation Plan (effective April 4, 1994). The procedures included visual observation, physical inspection, bulk sample collection, and condition assessment of suspect ACM. The number of samples collected was based on the amount and accessibility of each homogeneous material, with consideration given for the type, age, and condition.

Samples were collected from the suspect materials to assess the presence of asbestos (or lack thereof) in building materials/systems. Each sample collected was placed into a sealable plastic bag or tub, marked with a unique sample identification code, and packaged for subsequent shipment to the laboratory for analysis. Individual sample identification consisted of a numeric code denoting the sampling media/location.

Subsequent to packaging and labeling, samples were submitted under proper chain-of-custody to EMC Labs, Phoenix, AZ. The National Voluntary Laboratory Accreditation Program (NVLAP), Lab Code 101926-0 accredits EMC Labs for asbestos analysis. Samples were analyzed via Polarized Light Microscopy (PLM) utilizing EPA Method 600/R-93/116. Please note that USEPA and OSHA regulations define an asbestos containing material as a material containing more than one (1) percent asbestos, by volume, as determined by PLM analysis. In the case of

Asbestos containing material was identified during the survey of the facility (See the Executive Summary for specific materials/locations). The materials that are friable or will become friable during demolition or renovation operations must be removed by a licensed asbestos abatement company in the State of Utah following proper regulations and methods of abatement before demolition or renovation. State and Federal OSHA regulations state that any and all asbestos containing materials be removed by a properly trained and certified professional.

● The 9” Floor Tile is a non-friable asbestos containing materials, this material may remain during demolition as long as it is not rendered friable and any concrete/metal it is adhered to is not recycled. The demolition contractor must keep the materials wet during demolition and loading to prevent visible dust and all OSHA regulations must be followed.

typically exercised by professional consultants performing similar services. However, asbestos containing material can be present in a structure, but not identified using ordinary investigative procedures.

No asbestos survey can completely eliminate uncertainty regarding the presence of asbestos containing materials. ACM Environmental’s level of diligence and investigative procedures are intended to reduce, but not eliminate, potential uncertainty regarding the presence of asbestos containing materials. The procedures used for this survey attempt to establish a balance between the competing goals of limiting investigative costs, time, and building damage, and reducing the uncertainty about unknown conditions. Therefore, the determinations in this report should not be construed as a guarantee that all asbestos containing materials present in the subject property has been included in this report.

This report presents ACM Environmental’s professional determinations, which are dependent upon information obtained during performance of consulting services. ACM Environmental assumes no responsibility for omissions or errors resulting from inaccurate information provided by sources outside of ACM Environmental

No warranty or guarantee, expressed or implied, is made regarding the findings, conclusions, or recommendations contained in this report. The limitations presented above supersede the

On February 5, 2025 Anthony Pena conducted an asbestos survey and assessment for Salt Lake City Corporation at the Property listed above. 31 bulk samples of suspect asbestos-containing materials were collected and analyzed by PLM analysis.

The following accredited inspector conducted the survey and assessment.

Anthony Pena Date State of Utah, Division of Air Quality Inspector:

Certification Number: ASB-5355 Phone: (385) 313-6205 Email: Anthony@acmenvironmentalutah.com

2-5-25

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Gypsum Quartz

Plaster-Scratch Coat, Beige/ Off White/ Brown

None Detected0326055-001 1-A

<1%

Gypsum Carbonates

Plaster-Finish Coat/ Paint, Beige/ Off White

None Detected

Gypsum Carbonates

Drywall, White/ Brown

None Detected0326055-002 1-B

10%

Carbonates

Texture/ Paint, Beige/ Off White

None Detected

Gypsum

Drywall, White/ Brown

None Detected0326055-003 1-C

10%

Carbonates

Texture/ Paint, Beige/ Off White

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Gypsum

Drywall, White/ Brown

None Detected0326055-004 1-D

10%

Carbonates

Texture/ Paint, Beige/ Off White

None Detected

Gypsum

Drywall, White/ Brown

None Detected0326055-005 1-E

10%

Carbonates

Texture/ Paint, Beige/ Off White

None Detected

Gypsum

Drywall, White/ Brown

None Detected0326055-006 2-A

10%

Gypsum

Texture/ Paint, Beige/ Off White

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Gypsum

Drywall, White/ Brown

None Detected0326055-007 2-B

10%

Gypsum

Texture/ Paint, Beige/ Off White

None Detected

40%

Wallpaper, Beige

None Detected 60%

Gypsum

Drywall, White/ Brown

None Detected0326055-008 2-C

10%

Gypsum

Texture/ Paint, Beige/ Off White

None Detected

Gypsum

Cellulose FiberNoDrywall, White/ Brown Note: No Joint Compound or Texture Present in Sample

None Detected0326055-009 3-A

10%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Quartz Gypsum

98%

Plaster, White/ Brown

None Detected0326055-010 3-B

2%

Gypsum

Drywall, White/ Brown

None Detected 10%

Quartz Gypsum

Plaster-Scratch Coat, Beige/ Lt.

Gray

None Detected0326055-011 3-C

Gypsum Carbonates

Plaster-Finish Coat, White

None Detected

Cellulose FiberNoLAYER 3 Wall Paper, Blue/ Beige

None Detected 60%

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Quartz Gypsum

Plaster-Scratch Coat, Beige/ Lt.

Gray

None Detected0326055-012 3-D

Carbonates

Plaster-Finish Coat, White

None Detected

Carbonates

Plaster/ Paint, Beige

None Detected

Quartz Gypsum

Plaster-Scratch Coat, Beige/ Lt.

Gray

None Detected0326055-013 3-E

Gypsum Carbonates

Plaster-Finish Coat, White

None Detected

Carbonates

Plaster/ Paint, Lt. Blue

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

35%

Synthetic Fiber

NoFelt Paper, Brown/ Black None Detected0326055-014 4-A

60% 5%

35%

Synthetic Fiber

NoFelt Paper, Brown/ Black None Detected0326055-015 4-B

60% 5%

Foam

Fibrous Glass

NoLAYER 1 Sheet Vinyl, Beige/ Tan/ Lt Gray

None Detected0326055-016 5-A

15% 5%

Carbonates

Mastic, Dk. Brown

None Detected 1%

Foam

Fibrous Glass

NoLAYER 1 Sheet Vinyl, Beige/ Tan/ Lt Gray

None Detected0326055-017 5-B

15% 5%

Carbonates

Mastic, Dk. Brown

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

Synthetic Fiber

NoSheet Vinyl, Beige/ Gray/ Tan/ Green

None Detected0326055-018 6-A

17% 3%

Carbonates

Synthetic Fiber

NoSheet Vinyl, Beige/ Gray/ Tan/ Green

None Detected0326055-019 6-B

17% 3%

Carbonates

YesLAYER 1 9" Floor Tile, Beige/ Off White

Chrysotile0326055-020 7-A

3%

Silicone

Mastic, Tan

None Detected

Carbonates

9" Floor Tile, Beige/ Off White

Chrysotile0326055-021 7-B

3%

Silicone

Mastic, Tan

Layer Name / Sample Description

Lab ID Sample Location

Bulk Asbestos Analysis by Polarized Light Microscopy

Non-Asbestos Constituents

Laboratory Report

0326055

NVLAP# 101926-0

Client ID

Client:

Address: 25 NORTH 400 WEST STE 6

NORTH SALT LAKE, UT 85054

ACM ENVIRONMENTAL

Date Received: 02/06/2025

02/11/2025Date Analyzed:

Job# / P.O. #:

EMC LABS, INC.

Collected: 02/05/2025

EPA Method:

Project Name: 937 SOUTH 200 WEST-SLC

CORPORATION

Submitted By: ANTHONY PENA

Address:

Collected By:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044 Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

02/11/2025Date Reported:

App.E to Sub.E of 40 CFR Part 763 and EPA/600/R-93

Asbestos Type

Carbonates

12" Floor Tile, Beige/ Off White

None Detected0326055-022 8-A

Carbonates

Synthetic Fiber

NoLAYER 2…