Statment_of_Work01_05.pdf

Attachment II 15BNAS18R0097

40mm single shot launcher & 40mm multi shot launcher

(less than lethal delivery system)

TECHNICAL REQUIREMENTS/Statement of Work

1. Background: The Federal Bureau of Prisons (Bureau) has a requirement for the procurement of 40mm single shot launchers, multi-shot launchers, and 40MM certified armorer training.

2. Scope: This statement of work (SOW) delineates the required performance criteria for the acquisition of 40mm single shot launchers, multi-shot launchers, and 40MM certified armorer training for the Bureau.

The technical requirements for the 40mm single shot launchers, multi-shot launchers, and 40MM certified armorers training are specified in section 3:

3. Technical Requirements

3.1 40mm single shot launchers and Multi-shot launchers

Caliber: 40MM

Operation: Fully mechanical, no electronic controls.

Loading: Shall have a top or ambidextrous breach loading ability.

Breach Release: Breach release shall be ambidextrous.

Trigger: Double action only trigger.

Sights: Shall have (white or visibly colored) front post sight and notch or ring rear sights. Sights shall be constructed of steel or hardened aluminum, be an independent matched set.

Barrel: Device shall be equipped with a corrosive resistant and rifled barrel. Operating Temperature:

Shall be able to fully operate in temperatures ranging from -40 F to 140 F.

Ruggedized: Shall be resistant to environmental factors such as rain, salt water, dust, sand, and snow.

Munitions Compatibility: Shall be able to launch full array of non-lethal munitions with various lengths, ranging from 2.85 inches to 5.0 inches.

Appearance: Shall be monochromatic in color (to include the barrel, frame, grip, and buttstock) and be either black or dark tan. Markings shall be limited to serial number, manufacturer information, country of origin, model, caliber, and import information (if applicable), and safety or breech opening identifiers.

All markings shall be consistent in size and font. The device shall not be marked with inconsistent graphics.

Sling: Shall be equipped with at least one single-point sling attachment. At least one sling attachment point must be able to be accessed from the right and left side of the device.

The launcher’s total weight shall not exceed 11-13 lbs. The total length of the weapon shall not exceed

34 inches with stock open or fixed stock.

Buttstock: Shall be equipped with a foldable or collapsible buttstock, constructed of aluminum or durable polymer material. The stock shall be equipped with non-slip checkering, stippling, or grooves on the furthest rearward vertical surface.

Pistol grip: Shall be constructed of rubber or plastic and have non-slip checkering or stippling textured grip. The pistol grip shall be the same color as the device.

Accessory Vertical Grip: The vertical grip shall be textured with non-slip checkering, stippling, or grooves.

Reliability: Vendor shall provide 1 (one) each (EA) launchers at their own expense for government reliability testing. Device shall maintain full and uninterrupted operability throughout test firings of all Bureau’s operational less lethal munitions. The device must operate, without device failure, for a minimum of six (6) firings of each of the following munitions.

3.2 40MM certified armorer training: The vendor shall provide one (1) manufacturer’s certified armorer training course to Bureau’s armorers. The offered launcher must have a training program provided should be a certified armorer training based on industry standards available through the launcher manufacturer to certify Security Officers/Armorers with weapons repair, maintenance, operation, and assembly at a

Bureau of Prisons facility only. The initial Armorer

Training will be at no additional cost to the Bureau, a minimum of one Armorer at each institution authorized a launcher. The certification shall be valid for a minimum of three years.

This shall take place at six separate Bureau locations

(CONUS) to be designated by the COR. There will be approximately 22 participants to attend each armorer certification class. The vendor shall be responsible for all travel and related expenses incurred by their personnel, associated with this training.

4. Deliverables and Delivery Schedule: Deliverables shall be shipped within 120 days after receipt of order (ARO).

Delivery shall be FOB Destination. Specific locations, POCs and contact phone numbers will be provided with each delivery order.

The delivery schedule will be provided per each individual delivery order.

4.2 Packing and Marking: Preservation, packaging, packing

and marking of the items supplied and delivered under this contract shall be in accordance with current industry standards in order to prevent any deterioration and/or damage during shipping, handling, and storage, and to insure acceptance by common carrier and safe arrival at destinations.

Each package must be marked as follows:

“SECURITY HAZARD TO BE DELIVERED TO THE SECURITY OFFICER

ONLY”

5. WARRANTY: A minimum of one year unconditional warranty on parts and labor shall be provided. Part shall be to OEM specifications.

5.1 Vendor shall provide a warranty letter which delineates

all warranty coverage and timeframes.

5.2 Vendor shall be contacted by the Contracting Officer

Representative (COR), or an authorized representative of

Bureau, for all warranty work.

5.3 Vendor shall provide a primary point of contact, to

include phone number and email address.

5.4 Vendor shall acknowledge receipt of warranty claims to

the government appointed COR within two business days of being notified.

5.5 Warranty claims shall be remedied at no expense to the

government except for shipping to the factory.

5.7 For any warranty work that requires a change in serial

number, the vendor shall provide an accompanying letter indicating the disposition of the original serial number and the replacement serial number for accountability purposes.

6. Government –Furnished Equipment and Information: N/A

7. Place of Performance: CONUS, Alaska, Hawaii, and Puerto Rico. Please see attachment VII.

8. Period of Performance (PoP): Base Period of 12 months from date of award with four (4) 12 month option periods. Total

PoP not to exceed 60 months.

9. Special Considerations:

9.1 The Bureau requires Electronic invoicing. Electronic

invoices will be sent to the recipients as delineated in each delivery order (DO). Email addresses will be provided for all recipients upon issuance of a DO.

9.2 Shipment specific packing slips shall also contain a

list of serial numbers included with that shipment.