C05_140R3024Q0050_RFQ.pdf

140R3024Q0050 – Towable Diesel Generator Combined Synopsis/Solicitation

(i) This is a combined synopsis/solicitation for commercial supplies prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

(ii) To facilitate electronic quote submissions through SAM.gov, a request for quote RFQ No.

140R3024Q0050 is being issued subsequent to this combined synopsis/solicitation.

(iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular number 2024-03 Effective Date 02/23/2024.

(iv) This requirement will be a total small business set-aside. The North American Industry Classification System (NAICS) Code for this acquisition is: 335312 Motor and Generator Manufacturing.

The small business size standard for NAICS Code 335312 is 1,250 employees. Offerors will be verified against this NAICS to determine their small business size standard. Those Offerors that are not considered a small business under this NAICS will not be considered eligible for award.

(v) Line item 00010 – Towable Diesel Generator including F.O.B. Destination shipping

The Statement of Work (SOW) provides more detailed information about the requirement and is attached to the RFQ.

(vi) The Bureau of Reclamation Parker Dam has a requirement for a towable diesel generator in accordance with the Statement of Work (SOW). Offeror MUST submit supporting documentation along with your quotation to demonstrate the proposed quote meets the SOW.

(vii) Work shall begin on or about May 2024. All work shall be completed by Dec 2024.

THE FOLLOWING CLAUSES AND PROVISIONS ARE APPLICABLE TO THIS COMMERCIAL

ITEM ACQUISITION:

(viii) FAR provision 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services.

In addition to the requirements of the Instructions to Offerors - Competitive Acquisitions provision of this solicitation, each offeror will submit a quote in accordance with the instructions contained in this provision.

(1) Offer will complete and submit Standard Form (SF)18 - Request for Quotation. Pricing must be submitted on the SF-18.

(2) Submit the following information:

(a) Unique Entity Identifier (UEI): ___________________

(b) Contractor E-mail Address: ______________________

(3) Technical and Past Performance Information Requested:

(a) Technical: Offeror shall provide a written narrative detailing how they will complete this requirement, which shall identify the proposed generator and provide specifications that align with the requirements in Attachment #1 SOW. Offeror shall provide a confirmation statement that their quoted firm-fixed price on the SF-18 includes F.O.B. Destination shipping to the address in the Attachment #1 SOW. Lastly, the Offeror shall confirm that a standard 1-year warranty is included.

(b) Past Performance: Offeror is not required to submit any past performance documentation. However, the Government may use past performance information obtained, such from the Contractor Performance Assessment Reporting System (CPARS) database located at http//www.cpars.gov.

NOTE: An offeror without relevant experience, or for whom information on past performance is not available, will be given a Neutral rating, and will not be evaluated favorably or unfavorably. This rating is neither negative nor positive. Neutral is merely indicative of a lack of prior performance.

(ix) BASIS OF AWARD: Determination of award will be based on the lowest-priced technically acceptable (LPTA) quote from a responsive offeror. Please see Attachment #1 SOW. Additional evaluation details are found in the 52.212-2 Evaluation – Commercial Products and Commercial Services (NOV 2021) provision of this solicitation.

(x) FAR provision 52.212-3, Offeror Representations and Certifications - Commercial Products and Commercial Services.

Offerors are advised include with their offer, a completed copy of the provision 52.212-3, or indicate completion of the provision online. Offerors may complete the annual representations and certifications online at https://www.sam.gov/.

(xi) FAR clause 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services.

(xii) FAR clause 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

The following additional FAR clauses cited in this clause are applicable to the acquisition:

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) 52.219-28, Post Award Small Business Program Representation (Feb 2024) 52.219-33, Nonmanufacturer Rule (Sep 2021) 52.222-3, Convict Labor (Jun 2003) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB 2024) (E.O.13126) 52.222-21, Prohibition of Segregated Facilities (Apr 2015) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) 52.222-50, Combating Trafficking in Persons (Nov 2021) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018)

(xiii) Additional contract requirements include the following clauses and provisions:

52.252-2 Clauses Incorporated By Reference (Feb 1998) DOI-AAAP-0028 Electronic Invoicing And Payment Requirements-Invoice Processing Platform (IPP) (Feb 2021) 52.204-13 System For Award Management Maintenance (Oct 2018) 52.204-18 Commercial And Government Entity Code Maintenance (Aug 2020) WBR 1452.223-81 Safety and Health -- Bureau of Reclamation (AUG 2021) WBR 1452.223-82, Ensuring Adequate Covid-19 Safety Protocols In Federal Buildings And Federally Controlled Facilities -- Bureau Of Reclamation (Nov 2022) 52.204-7 System For Award Management (Oct 2018) 52.204-16 Commercial And Government Entity Code Reporting (Aug 2020) 52.211-6 Brand Name Or Equal (Aug 1999) DIAR 1452.215-71 Use And Disclosure Of Proposal Information -- Department Of The Interior (Apr 1984) 52.212-2 Evaluation—Commercial Products And Commercial Services (Nov 2021)

(xiv) Not Applicable

(xv) All questions shall be submitted via email to bwilliamson@usbr.gov no later than April 05, 2024

4:00 P.M. MST.

Offers are due April 22, 2024 10:00 A.M. MST. Responsible offerors are requested to submit a quote for this requirement. Offers shall be submitted via email to bwilliamson@usbr.gov.

(xvi) The Point of Contact for this solicitation is Mr. Bryan Williamson and may be reached via e-mail at bwilliamson@usbr.gov, or by phone at 702-293-8452.

End of Combined Synopsis/Solicitation

140R3024Q0050

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

03/21/2024 0040654509

1 2

Lower Colorado Region Regional Office 500 Fir Street

Bureau of Reclamation

Boulder City NV 89005

11/30/2024

Parker Dam

Parker Dam Field Division 2209 Parker Dam Road

Parker Dam

CA 92267

702 293-8452Bryan Williamson

04/22/2024 1000 MD

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

NAICS: 335312

Project Title: Towable Diesel Generator

***THIS IS A BRAND NAME REQUIREMENT***

Period of Performance: 05/01/2024 to 11/30/2024

00010 Towable Diesel Generator - BRAND NAME REQUIREMENT 1 EA

- Caterpillar CAT XQ125 Firm-Fixed Price Including F.O.B. Destination shipping

SEE STATEMENT OF WORK FOR FURTHER DETAILS

Product/Service Code: 6115 Product/Service Description: GENERATORS AND Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R3024Q0050

GENERATOR SETS, ELECTRICAL

Delivery: 11/30/2024

The Government will award a fixed-price purchase order, resulting from this RFQ, to the responsible vendor whose quote is the lowest priced technically acceptable (LPTA) offer.

Evaluation details are found in the 52.212-2

Evaluation - Commercial Products and Commercial

Services (NOV 2021) provision of this solicitation.

**SUBMIT ALL QUESTIONS VIA EMAIL TO BRYAN

WILLIAMSON, CONTRACT SPECIALIST @

BWILLIAMSON@USBR.GOV BY 04/05/2024 BY 4:00 PM MT

**SUBMIT YOUR QUOTES TO BRYAN WILLIAMSON VIA

EMAIL @ BWILLIAMSON@USBR.GOV

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

– Attachment 1

Statement of Work

Towable 125 KW 3-Phase 480V Diesel Generator

Parker Dam, California

U.S. Department of Interior

Bureau of Reclamation, Lower Colorado Region

Parker Dam Office Parker Dam California

Part 1 – GENERAL INFORMATION

1.01 INTRODUCTION

The Bureau of Reclamation (BOR), Parker Dam and Power Plant is located at Latitude: N 34° 17'

41.3844" Longitude: W 114° 8' 24.9684", on Parker Dam Rd., in San Bernardino County California.

Parker Dam has a requirement for a Towable 125KW XQ125 CAT Generator to power multiple emergency systems in the event of power failure.

1.02 SCOPE

This is a requirement to supply Parker dam with a Caterpillar Trailer Mounted CAT XQ125 Generator.

Capable of producing 110KW, 137 KVA standby and 100KW, 125KVA Prime power. The contractor shall deliver unit to Parker Dam.

1.03 REQUIREMENTS

The contractor shall supply a generator that meets the following requirements.

Generator Requirements:

1) Power

a) Power rating: 125KW

b) Prime Power Rating: 110 eKW

c) Frequency: 60 Hz

d) Voltage:

i) 3-Phase 480/277 Volt & 208/120 Volt

ii) 1-Phase 240/120 Volt

2) Excitation

a) Self-Excited

3) Engine System

a) 4-Stroke-Cycle Diesel

b) Turbocharged with Aftercooler

c) Water Cooled

4) Engine Air Inlet

a) Heavy-duty air cleaner with dust cup and service indicator

b) Turbocharger and air to air aftercooler

5) Cooling System

a) Provide 50°C ambient capability @ full rating.

b) Vertically mounted radiator with engine mounted cooling fan

c) 50/50 Extended Life Coolant.

d) Coolant low-level shutdown switch

e) Coolant recovery system

f) Coolant drain line with valve

6) Fuel System

a) Diesel Fuel.

b) Dual wall fuel tank.

c) Fuel tank capable of running generator for 24 hours @ 75%.

d) 3 way directional valve capable of external supply.

e) Engine mounted primary fuel filter with integral water separator.

f) Engine-mounted secondary fuel filter.

7) Control System

a) Cat EMCP 4.2B Control Panel

i) Electronic control panel provides power metering, protective relaying, engine, and generator parameter viewing, and expanded AC metering.

ii) Graphical display (3.8 in.) denotes text alarm/ event descriptions, set points, engine and generator monitoring, and is visible in all lighting conditions • Simple, user-friendly interface and navigation.

iii) Automatic set-point adjustment integrated with voltage selection

8) Alternator System

a) Charging alternator; 12V-100A, heavy duty with integral regulator and belt guards.

b) 10-Watt Solar maintainer for batteries.

9) Power Distribution

a) Twist lock receptables (X3)

b) STD connection group camlock

10) Enclosure

a) Steel enclosure with hinged, lockable doors.

11) Trailer

a) Trailer hitch Pintle, or 2-5/16” ball

b) Trailer brakes hydraulic

c) Trailer dimensions (L x W x H) no greater than 177” x 78” x 86”

d) Trailer weight 7500 lbs

12) Operating Manuals

a) Provide two complete sets, both bound and electronic PDF copies of :

i) Service manuals

ii) Operating instructions

iii) Technician manuals

iv) Maintenance procedures

v) Illustrated parts breakdown

13) Warranty

a) Standard 1-year warranty

14) Shipping, Storage, & Protection

a) Comply with manufacturer's installation instructions for rigging, unloading, and transporting units.

Unit shall be stored and handled per manufacturer’s instructions.

b) Protect units from physical damage.

c) Shipped to:

i) Parker Dam

Parker Dam Field Division

2209 Parker Dam Road

Parker Dam, CA 92267.

1.04 SUBMITTALS

1) EPA/CARB TIER 4F Emission Certification

2) Operating Manuals

b) Provide two complete sets, both bound and electronic PDF copies of :

i) Service manuals

ii) Operating instructions

iii) Technician manuals

iv) Maintenance procedures

v) Illustrated parts breakdown

1.05 SUBMITTAL REQUIREMENTS

1) Reclamation will have 14 calendar days to review each submittal.

2) Submittal documents shall include Purchase Order number and title, and submittal number and title.

3) The Contractor shall furnish all submittals to the COR and/or Contract Specialist electronically, in accordance with Submittal Requirements, Table 1: List of Submittals, and the requirements in the provisions, clauses, and paragraphs of this solicitation. Names and emails will be provided after award. Hard copies of drawings shall be submitted to the COR.

4) The word “submittals” includes all items listed in Table 1. Items required to be submitted by this

Statement of Work or elsewhere in this Purchase Order, but not listed in Table 1, shall be submitted in accordance with the requirement of this section and shall be submitted to the COR, unless specified otherwise.

5) Reclamation will provide an electronic response to the Contractor for each submittal. Submittals required for approval or acceptance will be returned either “approved” or “accepted” or “approved, subject to identified changes” or “accepted, subject to identified changes” or “not approved” or

“not accepted”. Submittals not approved or accepted shall be revised and resubmitted. Any resubmittal will require another 14 calendar days of Reclamation review time.

6) The Contractor shall provide the submittals to the emails provided. For hardcopy submittal requirements, COR shall provide a mailing address.

7) All costs of furnishing the submittals shall be at the Contractor’s expense and shall be included in the price bid schedule.

1.06 ACRONYMS, ABBREVIATIONS, AND SYNONYMS

1) AC – acceptance, conformance (when referring to a submittal)

2) AT – approval, technical (when referring to a submittal)

3) Bureau of Reclamation – Reclamation – Government - BOR

4) CO – Contracting Officer

5) COR – Contracting Officer’s Representative

6) Construction Contractor – Contractor – Builder

7) CPM – Critical Path Method

8) Days – Calendar days, unless otherwise specified

9) I/O – Input/Output

10) JHA – Job Hazard Analysis

11) RSHS – Reclamation Safety and Health Standards

12) RSN – Required Submittal Number

1.07 SUBMITTALS

RSN Item Clause or

Section Title Due Date Type* Responsible

Code**

EPA/CARB TIER 4F

Emission Certification

1.04 Requirements Prior to final payment

AT COR

02 Operating Manuals

1.04 Requirements Prior to final payment

AT COR

Table 1: List of Submittals

1.08 ATTACHMENTS

1) Product Specifications for XQ125 Tier 4 Final

Towable 125kw 3phase 480V Diesel Generator

Required Salient Characteristics

POWER

1) Power Rating:

2) Prime Power Rating:

3) Frequency:

4) Voltage:

1) 125 KW

2) 110 ekW

3) 60 Hz

4) 3-Phase 480/277 Volt, & 208/120 Volt

a. 1-Phase 240/120 Volt

Excitation 1) Self-Excited

ENGINE SYSTEM 1) 4-Stroke-Cycle Diesel

2) Turbocharged with Aftercooler

3) Water Cooled

ENGINE AIR INLET 1) Heavy-duty air cleaner with dust cup and service indicator.

2) Turbocharger and air-to-air after cooler.

COOLING SYSTEM 1) Provide 50°C ambient capability @ full rating

2) Vertically mounted radiator with engine mounted cooling fan

3) 50/50 Extended Life Coolant

4) Coolant low-level shutdown switch

5) Coolant recovery system

6) Coolant drain line with valve

7) Block Heater

FUEL SYSTEM 1) Diesel Fuel

2) Dual wall fuel tank 150-gal

3) Fuel tank capable of running generator for 24 hours @ 75%

4) 3 way directional valve capable of external supply

5) Engine mounted primary fuel filter with integral water separator

6) Engine-mounted secondary fuel filter

CONTROL SYSTEM 1) Cat EMCP 4.2B Control Panel

a. Electronic control panel provides power metering, protective relaying, engine, and generator parameter viewing, and expanded AC metering.

b. Graphical display (3.8 in.) denotes text alarm/ event descriptions, set points, engine and generator monitoring, and is visible in all lighting conditions • Simple, user-friendly interface and navigation.

c. Automatic set-point adjustment integrated with voltage selection

ALTERNATOR SYSTEM

1) Charging alternator; 12V-100A, heavy duty with integral regulator and belt guards.

2) 10-Watt Solar maintainer for batteries.

POWER DISTRIBUTION

1) Twist lock receptables (X3)

2) STD connection group camlock

ENCLOSURE

1) Steel enclosure with hinged, lockable doors.

TRAILER

1) Trailer hitch Pintle, or 2-5/16” ball

2) Trailer brakes hydraulic

3) Trailer dimensions (L x W x H) no greater than 177” x 78” x 86”

4) Trailer weight 7500 lbs

OPERATING MANUAL

1) Two complete sets of service manuals

2) Operating instructions

3) Technician manuals

4) Maintenance procedures

5) Illustrated parts breakdown

WARRANTY

1) Standard 1-year warranty

SHIPPING, STORAGE, &

PROTECTION

1) Comply with manufacturer's installation instructions for rigging, unloading, and transporting units. Unit shall be stored and handled per manufacturer’s instructions.

2) Protect units from physical damage.

3) Shipped to:

a) Parker Dam

Highway 95 Parker Dam Field Division

Parker Dam, CA 92267.

OTHER REQUIRMENTS

Cat® XQ125 Rental Generator Set

Page 1 of 7 LEHX0035-08 Caterpillar: Confidential Green

Standby 110 kW, 137 kVA

Prime 100 kW, 125 kVA

U.S. EPA Tier 4 Final

60 Hz

1800 RPM

Specifications

Generator Frequency Voltage Standby kW (kVA)

Prime kW (kVA)

Phase Amp (A)

Standard

60 Hz 480/277V 110 (137) 100 (125) 3-phase 150.35

60 Hz 208/120V 110 (137) 100 (125) 3-phase 346.97

60 Hz 240/120V 65 (65) 65 (65) 1-phase 270.83

Optional

60 Hz 600V/349V 110 (137) 100 (125) 3-phase 120.28

60 Hz 480V/277V 110 (137) 100 (125) 3-phase 150.35

60 Hz 208/120V 110 (137) 100 (125) 3-phase 346.97

60 Hz 240/120V 64 (64) 64 (64) 1-phase 266.67

Cat® C4.4 Diesel Engine Metric Imperial (English)

Configuration I-4, 4-Stroke - Water Cooled Diesel

Bore 105 mm 4.13 in

Stroke 127 mm 5 in

Displacement 4.4 L 268.5 in3

Aspiration Turbocharged-Aftercooled

Compression Ratio 16.5:1

Engine rpm 1800

Governor Type ADEM™ A4

Image shown may not reflect actual configuration

Page 2 of 7 LEHX0035-08 Caterpillar: Confidential Green

Features & Benefits

Fuel/Emissions Strategy

• Meets U.S. EPA Tier 4 Final emission standards and CARB certified for non-road mobile applications at all 60 Hz ratings

Design Criteria

• Meets ISO 8528 transient response and linear vibration

• Canadian Standards Association (CSA) Certified

Single-source Supplier

• Package is factory designed and production tested

• Manufactured in ISO 9001:2000 certified

Caterpillar facility

Cat C4.4 Diesel Engine

• Four-stroke diesel engine with ACERT technology combined with electronic engine controller offers consistent performance and excellent fuel economy

• Series turbocharged with smart wastegate

• Low ownership costs enabled by a 3,000 hrs service interval for multi-vee belts and service free tappets

• Oil and fuel filter change intervals: 500 hrs

Cat Clean Emissions Module (CEM)

• Engine mounted Aftertreatment module contains of

Diesel Oxidation Catalyst (DOC) and Selective

Catalytic Reduction (SCR)

• Aftertreatment remains invisible to the equipment operator when in use

• No requirement for ash servicing

• Service free for life of the engine

Diesel Exhaust Fluid (DEF) System

• DEF tank provides more than 24 hrs run time@

75% load.

• Electrically heated DEF lines

Cat Generator

• Matched to the performance and output characteristics of Cat engines

• Integrated voltage selector switch

• UL 1446 Recognized Class H insulation

Automatic Voltage Regulator (AVR)

• D350 excitation module

• Three-phase sensing

• Adjustable volts-per-hertz regulation

• Provides precise control, excellent block loading, and constant voltage in the normal operating range

XQCP Control Panel

• Electronic control panel provides power metering, protective relaying, engine, and generator parameter viewing, and expanded AC metering

• Four lines back-lit LCD text display

• Simple, user-friendly interface and navigation

• Integrates with the Automatic Voltage Regulator

(AVR) to provide precise control, excellent block loading, and constant voltage

Sound-attenuated Enclosure

• Provides excellent weather protection and allows for a quiet package operation with less than 66 dBA sound levels at full load, while offering excellent service access with multiple doors and access panels

• Galvanized sheet steel body panels for improved corrosion resistance

• Coolant and oil drains along with auxiliary fuel connections are all conveniently located at one location on the exterior of the enclosure for easy access

• Single point lifting

Fuel System

• Provides 24-hour runtime @ 75% prime

• Meets UL 142, ULC 601

• OPTIONAL: Meets Transport Canada (UN31A) requirements with factory-installed, optional vent kit

Reduced Environmental Impact

• 110% spill containment of onboard engine fluids

Cooling System

• Provides 50°C ambient capability @ full rating

• Coolant low-level shutdown switch

• Coolant recovery system for easy top off

Charging System

• Charging alternator; 12V-100A, heavy duty with integral regulator and belt guards

• 10-Watt Solar maintainer for batteries

Asset Monitoring and Management

• Product Link™ Generation (PLG) hardware provides two-way communication for remote control and equipment monitoring via cellular network

• Customer-defined, equipment-based, real-time status updates and alerts

• Flexible and customer-configurable user interface

• GPS provides asset location and geo-fencing

Page 3 of 7 LEHX0035-08 Caterpillar: Confidential Green

Factory-installed Standard Equipment

Engine

• Cat C4.4 heavy-duty diesel engine meets

Tier 4 Final emission standards

Engine Air Inlet

• Heavy-duty air cleaner with dust cup and service indicator

• Turbocharger and air-to-air after cooler

Cat CEM

• Engine mounted CEM

• Robust operation in cold weather and low loads

• Includes DOC and SCR

DEF System

• 8-gal (30 L) plastic DEF tank provides capacity to meet or exceed fuel tank runtime at any given load.

• DEF tank is equipped with integrated level sensor and heating element to aid in cold weather operation.

• Electrically heated DEF lines

• DEF level gauge located on the control panel

• Equipped with low and critically-low level alarms and a critically-low shutdown

Fuel System

• 150-gal (568 L) double-wall fuel tank

• Fuel fill located in an isolated enclosed space away from the engine compartment with a lockable door

• Designed to meet UL 142, ULC 601

• Provides 24-hour runtime @ 75% prime

• Engine mounted electric priming pump

• Auxiliary connections for customer-supplied fuel transfer system with 3-way fuel transfer valve

• Engine mounted primary fuel filter with integral water separator

• Engine-mounted secondary fuel filter

Cooling System

• Provides 50°C ambient capability @ full rating

• Vertically mounted radiator with engine mounted cooling fan

• 50/50 Extended Life Coolant

• Coolant low-level shutdown switch

• Coolant recovery system

• Coolant drain line with valve

Mounting System

• Engine, generator and radiator soft mounted to the heavy duty, fabricated steel base frame

Sound-attenuated Enclosure

• Provides excellent weather protection

• Offers a quiet package with 66 dBA sound levels

• Rugged, corrosion-resistant construction:

o Galvanealed, sheet steel body panels with zinc phosphate pre-treatment prior to polyester powder coating

• Excellent access for service and maintenance:

o Two doors on each side of the enclosure provides clear access to routine service and maintenance needs.

o Two rear doors provide access to power distribution and control panel access o Separate door for DEF and Diesel fill access o Access panel on the front provides access to clean radiator cores and to service DEF tank.

o Lube oil drain, coolant drain, external fuel supply and return lines are all piped to exterior of the enclosure and located on one panel for easy access.

• Security and safety features:

o Pad lockable latches on all access doors o Exterior emergency stop (E-stop) button

Lube System

• Open crankcase breather with filter

• Oil drain line with internal valve routed to connection point accessible from exterior

• 500-hour engine oil change interval

Starting System

• Single electric starting motor, 12VDC

• Single 12V (850 CCA) maintenance-free battery with disconnect switch, battery rack, and cables

• 120V single-phase block heater

Quality

• Factory testing of standard generator set and complete power module

• UL, NEMA, ISO, and IEEE standards

• O&M manuals

• CSA Certified

• Full manufacturer’s warranty

Shore Power

• One 110V shore power connection for powering engine block heater and generator space heater (optional), battery charger (optional), and single duplex service receptacle

• Includes controls to de-energize block and generator space heaters when the engine is running

Page 4 of 7 LEHX0035-08 Caterpillar: Confidential Green

Factory-installed Optional Equipment

Vent Kit

• Provides necessary vents and films to upgrade the standard UL142 certified tank to meet Transport

Canada (UN31A) certification

Trailer Electric

• Two-axle trailer with Electric brakes

Trailer Hydraulic

• Two-axle trailer with Hydraulic brakes

Battery Charger

• 10A, 12 VDC output

• UL & CSA listed

Hitches

• 3" Pintle OR 2-5/16" Ball

Generator Space Heater

• 110 VAC Anti-condensation heater

Permanent Magnet Generator (PMG)

• Adds independent source of excitation to generator

NEMA Receptacles

• 208 Volt locking NEMA receptacles, quantity 2

600V Generator

• Includes 600V generator and 4-position rotary switch for easy selection of desired output

• Available voltages include:

o 3-phase (600/347 Volt, 480/277 Volt, 208/120 Volt) o 1-phase (240/120 Volt)

Page 5 of 7 LEHX0035-08 Caterpillar: Confidential Green

Technical Data

Cat Generator

Frame size LC3114F

Pitch 2/3

No. of poles 4

No. of leads 12

Excitation Self Excited

Number of bearings Single bearing, close coupled

Insulation Class H

Enclosure Drip proof IP23

Alignment Pilot shaft

Overspeed capability – % of rated 125% of rated

Voltage regulator 3-phase sensing with volts-per-hertz

Voltage regulation (adjustable to compensate for engine speed droop and line loss)

Less than ± 1⁄2% voltage gain

Wave form deviation 3%

Telephone Influence Factor (TIF) Less than 50

Harmonic Distortion (THD) Less than 5%

Cat Generator Set

Units 60 Hz — Standby 60 Hz — Prime

Power Rating kW (kVA) 110 (137) 100 (125)

Performance Specification

Lubricating System

Oil pan capacity L (gal) 9.4 (2.5) 9.4 (2.5)

Fuel System

Fuel consumption — 100% Load L/hr (gal/hr) 31.3 (8.27) 28.4 (7.49)

75% Load L/hr (gal/hr) - 20.9 (5.51)

50% Load L/hr (gal/hr) - 14.4 (3.80)

25% Load L/hr (gal/hr) - 7.5 (1.97)

Fuel tank capacity L (gal) 568 (150) 568 (150)

Run time @ 75% rating Hr 28

DEF System

DEF consumption — 100% Load L/hr (gal/hr) 1.2 (0.31) 0.47 (0.12)

75% Load L/hr (gal/hr) - 0.72 (0.19)

50% Load L/hr (gal/hr) - 0.39 (0.10)

25% Load L/hr (gal/hr) - 0.45 (0.12)

DEF tank capacity L (gal) 30 (7.92) 30 (7.92)

Run time @ 75% rating Hr 24

Cooling System

Ambient capability °C (°F) 55 (131) 55 (131)

Engine & radiator coolant capacity L (gal) 18.3 (4.8) 18.3 (4.8)

Noise Rating (with enclosure)

@ 7 meters (23 feet) @ 75% rating dB(A) 66 65

Page 6 of 7 LEHX0035-08

Caterpillar: Confidential Green

Technical Data (continued)

General Layout Dimensions

Dimensions in millimeters (inches).

Shown with optional trailer.

Dimensions and Weights

Model Length mm (in)

(A)

Width mm (in)

(B)

Height mm (in)

(C)

With Lube Oil

& Coolant

Kg (lb.)

With all fluids

Kg (lb.)

XQ125 3,261 (128.4) 1,243 (48.9) 1,856 (73) 2,372 (5,230) 2,876 (6,341)

XQ125 with trailer (electric brakes)

4,475 (176) 1,981 (78) 2,174 (85.5) 2,812 (6,200) 3,316 (7,311)

XQ125 with trailer

(hydraulic brakes) 4,495 (177) 1,981 (78) 2,174 (85.5) 2,821 (6,220) 3,325 (7,331)

(A) (B)

(C)

LEHX0035-08 (12/21)

Caterpillar: Confidential Green

Item Description

Steel enclosure with hinged, lockable doors (not shown)

2 Circuit breakers for receptacles

3 Emergency stop

2X Single-phase GFCI duplex receptacles (20A @ 120V)

5 Two-wire remote start terminals

3X Single-phase, California-style, twist-lock receptacles, 50A @ 208V phase-to-phase, 120V phase to neutral, or 240/120 single-phase when in that voltage position

Single-phase, NEMA locking input receptacle, (30A @ 120V) to power block heater, battery charger and generator space heater

8 HEST and DPF lamp

9 Glow plug lamp

10 XQCP digital generator set controller

11 Potentiometer for voltage adjustment

12 Cat ET service tool connector

13 Generator main circuit breaker

Main bus connection (bus bars with 13 mm holes) behind hinged cover with safety switch

15 Breaker trip door switch

Control Panel and Power Distribution Layout

Ratings Definitions and Conditions

Meets or Exceeds International Specifications: AS1359, CSA, IEC60034-1, ISO3046, ISO8528, NEMA MG 1-33.

Prime — Output available with varying load for an unlimited time. Average power output is 70% of the prime power rating. Typical peak demand is 100% of prime rated ekW with 10% overload capability for emergency use for a maximum of 1 hour in 12. Overload operation cannot exceed 25 hours per year. Prime power in accordance with

ISO3046. Prime ambient shown indicate ambient temperature at 100% load which results in a coolant top tank temperature below the alarm temperature.

Standby — Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Ratings are based on SAE J1349 standard conditions. These ratings also apply at ISO3046 standard conditions.

Fuel rates are based on fuel oil of 35º API [16ºC (60ºF)] gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb) when used at 29ºC (85ºF) and weighing 838.9 g/liter (7.001 lbs/U.S.

gal).

Additional ratings may be available for specific customer requirements, contact your Caterpillar representative for details. For information regarding low sulfur fuel and biodiesel capability, please consult your Cat dealer.

www.Cat.com/rentalpower ©2022 Caterpillar

All rights reserved.

Materials and specifications are subject to change without notice.

The International System of Units (SI) is used in this publication.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, "Caterpillar Corporate Yellow", the "Power Edge" and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission

11 12 http://www.cat.com/rentalpower

Clauses

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2023)

---Addendum to 52.212-4---

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

(End of clause)

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-INVOICE PROCESSING

PLATFORM (IPP) (FEB 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is:

https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

Company Generated Invoice

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone

(866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

WBR 1452.223-81 Safety and Health -- Bureau of Reclamation (AUG 2021)

(a) The Contractor shall not require any person employed in the performance of this contract (including subcontracts) to work under conditions which are unsanitary, hazardous, or dangerous to the employee's health or safety.

(b) Contractor shall comply with the most current version of the Bureau of Reclamation Reclamation Safety and Health Standards (RSHS) and, if applicable, the requirements of the Accident Prevention Clause (FAR 52.236-13 ).

The RSHS manual shall be obtained at http://www.usbr.gov/ssle/safety/RSHS/rshs.html

(c) Comply with the standards issued by the Secretary of Labor at 29 CFR Part 1926 and 29 CFR Part

1910 from the Occupational Safety and Health Administration, U.S. Department of Labor, www.osha.gov.

(d) In the event there is a conflict between the requirements contained in paragraphs (b) and (c) referenced herein, the more stringent requirement shall prevail.

(e) The Contractor shall submit a written proposed safety program as prescribed in the RSHS and the written specifications.

(f) The Contractor shall maintain an accurate record of, and shall report to the Contracting Officer (or authorized representative) in the manner prescribed by the Contracting Officer, all cases of death, occupational diseases, or traumatic injury to employees or the public involved, and property damage in accordance with the RSHS and OSHA guidelines.

(g) The rights and remedies of the Government provided in this clause are in addition to any other rights and remedies provided by law or under this contract.

(h) If the RSHS is updated or amended by Reclamation during the course of this contract, the contractor will be notified in writing. The contractor shall comply with the current RSHS immediately upon written notification. Should the contractor feel that the updated version of RSHS constitutes a substantive change to the contract, affecting price or time (or both), the contractor may request an equitable adjustment in the contract price. Any such requests shall include a price proposal submitted in compliance with Contract Clause WBR 1452.243-80, Modification Proposals - Bureau of Reclamation, and in sufficient detail to allow meaningful analysis of labor, equipment and material.

WBR 1452.223-82, ENSURING ADEQUATE COVID-19 SAFETY PROTOCOLS IN FEDERAL BUILDINGS

AND FEDERALLY CONTROLLED FACILITIES -- BUREAU OF RECLAMATION (NOV 2022)

When accessing Federal buildings and federally controlled facilities under this contract, contractor employees shall comply with the Safer Federal Workforce Task Force’s current guidance for COVID-19 workplace safety protocols for Federal agencies at https://www.saferfederalworkforce.gov/.

--- End of Addendum to 52.212-4---

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE

ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (FEB 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan

2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C.

3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov

2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009

(Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900 (a).

[X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L.

109-282) ( 31 U.S.C. 6101 note).

[ ] (6) [Reserved].

[ ] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

[ ] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016)

(Pub. L. 111-117, section 743 of Div. C).

[X] (9) 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023)

(10) 52.204–28, Fe[ ]deral Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

[ ] (11)(i) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub.

L. 115–390, title II).

(ii) Alternate[ ] I (Dec 2023) of 52.204–30.

[X] (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note).

[ ] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018)

(41 U.S.C. 2313).

[ ] (14) [Reserved] [ ] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

[ ] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(17)[Reserve[ ]d]

[X] (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[ ](20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

[ ] (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9.

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Sep 2023) of 52.219-9

[ ] (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ](23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 637(a)(14))(Deviation OCT 2022).

[ ] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

[ ] (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned

Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C.

657f).

[X] (26) (i) 52.219-28, Post Award Small Business Program Representation (Feb 2024) (15 U.S.C. 632(a)(2)).

[ ] (ii) Alternate I (MAR 2020) of 52.219-28.

[ ] (27) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

[ ] (28) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C.

637(m)).

[ ] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

[X] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)).

[X] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB 2024) (E.O.13126).

[X] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[X] (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[ ] (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[X] (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[ ] (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

[X] (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[ ] (40) 52.222-54, Employment Eligibility Verification (May 2022). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in 22.1803.)

[ ] (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons

(Jun 2016) (E.O. 13693).

[ ] (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (Jun 2016) (E.O. 13693).

[ ] (44) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514).

[ ] (ii) Alternate I (Oct 2015) of 52.223-13.

[ ] (45) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Jun 2014) of 52.223-14.

[ ] (46) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C. 8259b).

[ ] (47) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s

13423 and 13514).

[ ] (ii) Alternate I (Jun 2014) of 52.223-16.

[X] (48) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O.

13513).

[ ] (49) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

[ ] (50) 52.223-21, Foams (Jun 2016) (E.O. 13693).

[ ] (51) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3.

[ ] (52) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[X] (53) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110- 138, 112-41, 112-42, and 112-43.

[ ] (ii) Alternate I [Reserved].

[ ] (iii) Alternate II (Dec 2022) of 52.225-3.

[ ] (iv) Alternate III (NOV 2023) of 52.225-3.

[ ] (54) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (55) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (56) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] (57) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

[ ] (58) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

[ ] (59) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[X] (60) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services

(Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

[ ] (61) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41

U.S.C. 4505, 10 U.S.C. 3805).

[X] (62) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31

U.S.C. 3332).

[ ] (63) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul

2013) (31 U.S.C. 3332).

[ ] (64) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (65) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (66) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ] (67) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[ ] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[ ] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

This Statement is for Information Only: It is not a Wage Determination

Employee Class Monetary Wage-Fringe Benefits

[List as necessary]

[ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[ ] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C.

chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[ ] (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

[ ] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

[ ] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d)…