SCAN0074_0001.PDF

This is a quality control inspection and test report from F.E. Myers, a pump manufacturer located in Ashland, Ohio. The document serves as a product certification tag for a completed unit, dated November 5, 2006, with catalog number AV-30m-121 and serial number 128810, built by builder 62740.

The report documents completion of multiple quality assurance tests and inspections required prior to product delivery. Key testing parameters include impeller cap screw torque specification of 43 ft/lb, motor housing pressure test, seal chamber pressure test, and oil plug venting after run test. Power cord testing was conducted with a high potential test yielding a MEG-OHM value of 260. Control cord tests verified thermal sensor and seal leak detector readings in ohms. Performance testing confirmed impeller diameter as STD (standard) and shut-off head specifications. The document includes checkboxes for motor housing pressure test, seal chamber pressure test, oil plug venting, power cord high potential test, and builders stamp on nameplate, though most boxes remain unmarked. This quality assurance tag would typically be affixed to the completed pump unit as verification of manufacturing compliance and readiness for shipment.