CASPER_FIELD_OFFICE_REVISED_DRAWINGS_0003.pdf
PDF 3 MB Posted
- Attached to
- BLM WYOMING BUFFALO AND CASPER SECURITY SYSTEMS Federal contract opportunity
- Solicitation number
- 140L6221R0031
About this file
This set of construction drawings and related documents outline requirements for security systems upgrades at the Bureau of Land Management's Buffalo and Casper Field Offices in Wyoming. The solicitation seeks proposals to install access control, intrusion detection, CCTV, and duress systems. Drawings depict device locations and specifications at both site and floor plans. Notes require all exterior housings to be NEMA 4X rated and provide details on wiring, conduits, junction boxes and other infrastructure. The opportunity is available through the Department of the Interior Bureau of Land Management Wyoming Region under solicitation number 140L6221R0031, with responses due on June 27, 2020. Award is expected by July 2020.
View the file
Other files for this federal contract opportunity
Show all 21
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BUREAU OF LAND MANAGEMENT
CASPER FIELD OFFICE
2987 PROSPECTOR DR
CASPER, WY 82604
BLM-CFO-01-101
01-101
SECTION - GENERAL
COVER SHEET
CASPER FIELD OFFICE
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
© 2017 GOOGLE© 2017 GOOGLE© 2017 GOOGLE
XX
XX
XX
GENERAL SYMBOLS
SHEET NUMBER
DETAIL NUMBER
SHEET NUMBER
ELEVATION NUMBER
SHEET NUMBER
SECTION NUMBER
DETAIL NUMBER
DETAIL DESCRIPTION
ADDITIONAL DETAIL INFORMATION
SHEET NUMBER
AREA OF INCLUSION
00-000
2c 18 AWG
NUMBER OF CONDUCTORS
GAUGE OF WIRE
FILE NUMBER DESIGNATION
XXX-XXX-XX-XXX
FACILITY DESIGNATOR
LOCATION DISCIPLINE DESIGNATOR
DRAWING TYPE DESIGNATOR
3-4 DIGIT SEQUENTIAL PAGE NUMBER
DRAWING TYPE DESIGNATOR
(PER ERDC/ITL TR-06-X; TABLE 2-3)
NOTE: PAGE NUMBER IS AN ABBREVIATED VERSION OF THE FILE NUMBER
WIRE GAUGE DESIGNATION
XX-XXX
XX-XXX
XX-XXX
1. GENERAL NOTES ON THIS SHEET APPLY TO ALL DRAWINGS.
2. LEGENDS ARE COMPOSED OF STANDARD SYMBOLS AND ARE PERTINENT TO THE CONDITIONS
ON THE SET OF DRAWINGS. ADDITIONAL LEGENDS AND/OR OTHER LEGEND SHEETS MAY
APPEAR ON SPECIFIC DRAWINGS TO INDICATE SPECIFIC CONDITIONS.
3. NEWLY INSTALLED ENCLOSURES, CABINETS, HOUSINGS, BOXES AND FITTINGS HAVING HINGED
DOORS OR REMOVABLE COVERS AND WHICH CONTAIN CIRCUITS OR CONNECTIONS OF THE
ACS SYSTEM AND ITS POWER SUPPLIES, SHALL BE PROVIDED WITH COVER OPERATED,
CORROSION RESISTANT TAMPER SWITCHES, ARRANGED TO INITIATE AN ALARM SIGNAL
WHEN THE DOOR OR COVER IS MOVED. THE ENCLOSURE AND THE TAMPER SWITCH SHALL
FUNCTION TOGETHER AND SHALL NOT ALLOW DIRECT LINE OF SIGHT TO ANY INTERNAL
COMPONENTS BEFORE THE SWITCH ACTIVATES. TAMPER SWITCHES SHALL BE
INACCESSIBLE UNTIL THE SWITCH IS ACTIVATED; HAVE MOUNTING HARDWARE
CONCEALED SO THAT THE LOCATION OF THE SWITCH CANNOT BE OBSERVED FROM THE
EXTERIOR OF THE ENCLOSURE; BE CONNECTED TO CIRCUITS WHICH ARE UNDER
ELECTRICAL SUPERVISION AT ALL TIMES, IRRESPECTIVE OF THE PROTECTION MODE IN
WHICH THE CIRCUIT IS OPERATING; SHALL BE SPRING-LOADED AND HELD IN THE
CLOSED POSITION BY THE DOOR OR COVER; AND SHALL BE WIRED SO THAT THE
CIRCUIT IS BROKEN WHEN THE DOOR OR COVER IS DISTURBED.
4. ACCESS CONTROL SYSTEM EQUIPMENT MUST BE EQUIPPED WITH CONTINUOUSLY MONITORED
TAMPER DETECTION DEVICES REGARDLESS OF WHETHER THE SYSTEM IS IN THE ACCESS OR
SECURE MODE OF OPERATION. UPON DETECTION, AN ALARM (NOT FAULT) CONDITION MUST BE
TRANSMITTED TO THE PCU OR MONITORING STATION.
5. EXACT MOUNTING LOCATION OF ACS, DAS, CCTV SHALL BE VERIFIED PRIOR TO INSTALLATION.
6. ALL EXTERIOR HOUSING ENCLOSURE BOXES SHALL BE NEMA 4X RATED.
7. CONTRACTOR SHALL INSTALL A WARNING UNDERGROUND MARKER TAPE ABOVE ALL SECURITY
UNDERGROUND DUCTBANKS. IT SHALL BE SOLID FOIL MARKER TAPE, ORANGE, 3 INCHES WIDE, DETECTABLE, NON-DEGRADABLE, CORROSION RESISTANT, TEAR RESISTANT AND WITH
1 1/4 INCH STENCILED BLACK NON-DEGRADABLE LETTERS. WORDING ON MARKERS READ
"CAUTION DUCTBANK BURIED BELOW." TRACER WIRE SHALL BE INCLUDED WITH ALL DIRECTIONAL BORING.
8. ALL FIELD DISTRIBUTION BOXES AND SECURITY EQUIPMENT CABINETS SHALL HAVE A GROUNDING
LUG OR A GROUNDING BUS BAR INSTALLED.
9. ALL COPPER WIRE TERMINATIONS SHALL HAVE AT LEAST A 3'-0" (0.91m) SERVICE
LOOP AT EACH END. ALL ESS WIRING SHALL HAVE AT LEAST 3'-0" BETWEEN A SURGE
PROTECTOR AND A DEVICE.
10. IF ANY REQUIRED INFORMATION IS NOT CONTAINED WITHIN THIS SET OF DRAWINGS, REFER TO
MANUFACTURER SUPPLIED INSTRUCTIONS.
11. THESE DRAWINGS ARE DIAGRAMITC IN NATURE AND ARE NOT INTENDED TO SHOW EXACT CONDITIONS
AS MAY EXIST UNLESS NOTED OTHERWISE.
12. DO NOT SCALE DRAWINGS AS PROVIDED SCALES ARE FOR REFERENCE ONLY.
13. THE SCALES APPLIED TO THE DRAWINGS ARE BASED OFF U.S. CUSTOMARY UNITS STANDARD.
GENERAL NOTES
0 - GENERAL (SYMBOLS LEGEND, NOTES, ETC.)
01 COVER SHEET
02 SYMBOLS PAGE
03 ABBREVIATIONS
04 DRAWING INDEX
05 EQUIPMENT LISTS
1 - PLANS (HORIZONTAL VIEWS)
10 - PLAN VIEWS
A. OVERALL PLAN VIEWS
B. SPECIFIC BUILDING PLAN VIEWS
C. ENLARGED PLAN VIEWS
11 - ELECTRICAL & CABLING
A. PLAN VIEWS SHOWING ELECTRICAL CONDUIT RUNS
B. PLAN VIEWS SHOWING FIBER OPTIC CONDUIT RUNS
C. JUNCTION BOX LOCATIONS
D. WIRE DETAILS OF SIZE, QUANTITY
2 - ELEVATIONS (VERTICAL VIEWS)
3 - SECTIONS (SECTIONAL VIEWS)
4 - LARGE-SCALE VIEWS
(PLANS, ELEVATIONS OR SECTIONS THAT ARE NOT DETAILS)
5 - DETAILS
6 - SCHEDULES AND DIAGRAMS
60 - BLOCK DIAGRAMS
61 - ONE-LINE DIAGRAMS
62 - EQUIPMENT INTERCONNECTION DIAGRAMS
63 - WIRING DIAGRAMS NOT SPECIFIC TO EQUIPMENT
64 - TELECOMMUNICATIONS DIAGRAMS
65 - EQUIPMENT SCHEDULES
66 - PROGRAMMING SCHEDULES
67 - RACEWAY/CIRCUIT SCHEDULES
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
GENERAL INFORMATION
BLM-CFO-01-102
01-102
SECTION - GENERAL
MCL
NOTE: ABBREVIATIONS LISTED ARE BASED ON INDUSTRY STANDARDS AND ALL MAY NOT BE APPLICABLE TO PROJECT.
ABBREVIATIONS SECURITY LEGEND
ALARM INTERFACE
CENTRAL PROCESSING UNIT
ELECTRONIC ENTRY CONTROL SYSTEM
HAND GEOMETRY UNIT
INTRUSION DETECTION SYSTEM
ACC/SEC
BMS
CJB
CPU
CR
ECE
EECS
HGU
IDS
DCM DOOR CONTROL MODULE
CARD READER
CU COPPER
EMT ELECTRICAL METALLIC TUBING
BALANCED MAGNETIC SWITCH
ENROLLMENT CENTER EQUIPMENT
H
DC DIRECT CURRENT
CTL CONTROL
AMP
ABOVE FINISHED FLOOR
AMPERE
EP EXPLOSION PROOF
AIF ACTIVE INFRARED SENSOR
DIB DEVICE INTERFACE BOX
CLOSED CIRCUIT TELEVISIONCCTV
CAMERA JUNCTION BOX
CTW CAMERA TOWER
DB
AFF
DP DISTRIBUTION POWER
AWG AMERICAN WIRE GAUGE
AUX
APPROX APPROXIMATELY
AUXILIARY
ADMIN ADMINISTRATOR
BLDG BUILDING
CAB
C
CABINET
COMM COMMUNICATION
DIST DISTANCE
ELECT ELECTRICAL
EQ EQUAL
EQUIP EQUIPMENT
ENCL ENCLOSURE
UNDERGROUND DUCTBANK
EHH ELECTRICAL HAND HOLE
HIGH
BAT BATTERY
BC BATTERY CHARGER
DVR DIGITAL VIDEO RECORDER
EMI ELECTROMAGNETIC INTERFERENCE
EMH
ELECTRICAL MANHOLE
CONDUIT
ERAC
BPS BYPASS SWITCH PANEL
ELEVATIONEL
FOP FIBER OPTIC DISTRIBUTION PANEL
FORX
FOT
FIBER OPTIC RECEIVER MODULE
FIBER OPTIC TRANSMISSION PANEL
GND GROUND
FDB FIELD DISTRIBUTION BOX
GALV GALVANIZED
GB GLASS BREAK
FOSC FIBER OPTIC SENSOR CABLE
(F) FUTURE
FO FIBER OPTIC
FOCC FIBER OPTIC I/O CONVERTER
GS GATE SENSOR SWITCH
GSB GATE SENSOR SWITCH JUNCTION BOX
FOB FIBER OPTIC BOX
FOSS FIBER OPTIC SENSOR SYSTEM
EXT EXTERIOR
EQUIPMENT RACK AIR CONDITIONER
FFOM FENCE FIBER OPTIC MODULE
FFOR FENCE FIBER OPTIC RACK
FOM FIBER OPTIC MODULE
FOPP FIBER OPTIC PATCH PANEL
FOR FIBER OPTIC RACK
I/O INPUT/OUTPUT
RIGID GALVANIZED STEEL
STAINLESS STEEL
RGS
SST
UPS
VM
REX
TSL TURNSTILE
SSC
TA
TAS
TROUBLE ALARM
T
TBD TO BE DETERMINED
REQ'D REQUIRED
SW SWITCH
TB TERMINAL BLOCK
W
VIDEO MONITOR
UNINTERRUPTIBLE POWER SUPPLY
TAMPER ALARM SWITCH
REQUEST TO EXIT DEVICE
V VOLTAGE
ST STRAIGHT TIP
SP SPARE
QTY QUANTITY
PR PAIR
WIDTH
PWS POWER SUPPLY ENCLOSURE
SSB SURGE SUPPRESSION BOX
TWF TAUT WIRE FENCE ALARM AREA
PP POWER PANEL
TRANSFORMER/TAMPER
UL
UNDERWRITERS LABORATORIES
TYP TYPICAL
WHT WHITE
W/ WITH
OH OVERHEAD
REC RECEIVING
SO FLEXIBLE POWER CORD
SQ SQUARE
SHH SECURITY HAND HOLE
VLS VEHICLE LOOP SENSOR
TV TELEVISION
THHN 90°, 600 VOLT NYLON JACKETED
BUILDING WIRE FOR DRY LOCATIONS
SS
SCMS SITE CONTROL AND MONITORING
SYSTEM
PNL PANEL
PTZ PAN TILT AND ZOOM
PVC POLYVINYL CHLORIDE
GATE SAFETY SENSOR
SURGE SUPPRESSOR-COAX
SSDA SURGE SUPPRESSOR-DATA
SSP SURGE SUPPRESSOR-POWER
SPDT SINGLE POLE DOUBLE THROW
SWGR SWITCHGEAR
WS WORK STATION
OSSC
PS POWER SUPPLY
SCH SCMS HUB
SCP
SCW
SCWC
SCMS PRINTER
SCMS WORKSTATION
SCMS WORKSTATION CONSOLE
LP
LOPA LOSS OF POWER ALARM
NTS NOT TO SCALE
NO
NC NORMALLY CLOSED
NORMALLY OPEN
lbs POUNDS
LED LIGHT EMITTING DIODE
LAN LOCAL AREA NETWORK
MSR MAIN SERVICE ROAD
NO. NUMBER
NOT IN CONTRACTNIC
KBD
KPD
CCTV KEYBOARD
KEYPAD
JUNCTION BOXJB
MLIB
MON
MATRIX LOOPING INPUT BAY
MECH MECHANICAL
MONITOR
CCTV ALARM INTERFACE UNITTVAI
CCTV CENTRAL PROCESSING UNITTVCP
LANU LOCAL AREA NETWORK UNIT
TP TELEPHONE DISTRIBUTION PANEL
LSI LEAD SYSTEM INTEGRATOR
SPP SECURITY POWER PANEL
VID VIDEO
LOCAL PROCESSOR
ON-SITE SUPPORT CENTER
SJB SECURITY JUNCTION BOX
HS HATCH SWITCH
HVR HIGH VOLTAGE RELAY
LCD LIQUID CRYSTAL DISPLAY
RECP RECEPTACLE
RTC REMOTE TERMINAL CONTROLLER
AS ALARM SOUNDER
ECU ELECTRIC CYLINDER UNLATCH
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
MBS MATRIX BAY SWITCH
M:
N:
O:
P:
Q:
R:
S:
T:
U:
V:
W:
TIC TELEPHONE INTERCOM
VAC VOLTAGE ALTERNATING CURRENT
VDC VOLTAGE DIRECT CURRENT
ITS INFRASTRUCTURE TAMPER SWITCH
ES ELECTRIC STRIKE
BMX BISTATIC MICROWAVE TRANSMITTER
BMR BISTATIC MICROWAVE RECEIVER
MS MAGNETIC SWITCH
SDR SECURITY DOOR/GATE
CAM CAMERA
OPR GATE OPERATOR
DT DUAL TECHNOLOGY MOTION SENSOR
DS DURESS SWITCH
HEAT DETECTORHD
PREX PUSH-ACTIVATED REQUEST TO EXIT
STR STROBE
HORNHRN
PB PUSH BUTTON
MAG ELECTROMAGNETIC LOCK
HWS HORN WITH STROBE
MIC MICROPHONE
FAK FIRE ALARM KEYPAD
SD SMOKE DETECTOR
PIR PASSIVE INFRARED
MM MONOSTATIC MICROWAVE
SM SINGLE MODE FIBER OPTIC
SEC SECURITY EQUIPMENT CABINET
WAP WIRELESS ACCESS POINT
CPL CAMERA POLE
CAS FIBER OPTIC CASSETTE
EX EXISTING
WDS WIRELESS DURESS SWITCH
AN ANNUNCIATOR
DPS DOOR POSITION SWITCH
ACCESS CONTROL MODULEACM
IR INFRARED
HPB HANDICAP PUSH BUTTON
INTERCOMINT
DAS DURESS ALARM SYSTEM
DPDT DOUBLE POLE DOUBLE THROW
ECB ELECTRIC CRASH BAR
EML ELECTRIC MORTISE LOCK
FOPC FIBER OPTIC PATCH CASSETTE
FIELD OF VIEW
FOTC
FOTX
FOV
FIBER OPTIC TRANSCEIVER MODULE
FIBER OPTIC TRANSMITTER MODULE
FEETFT
F CONTINUED:
GCM GENERAL CONTROL MODULE
INTERCOM MASTERINT/M
INTERMEDIATE METALLIC CONDUIT IMC
NVR NETWORK VIDEO RECORDER
SPST SINGLE POLE SINGLE THROW
FJB FIBER OPTIC JUNCTION BOX
HH HAND HOLE
MCB MECHANICAL CRASH BAR
MCL MECHANICAL CIPHER LOCK
PUSH BUTTON
CARD READER
CONTACTLESS CARD READER W/ KEYPAD
REQUEST TO EXIT
INTERCOM
ELECTRIC STRIKE
ELECTROMAGNETIC LOCK
ACCESS CONTROL PANEL
DURESS SYSTEM
EQUIPMENT GROUND
STROBE
POLE
NORTH ARROWS
UNINTERRUPTABLE POWER SUPPLY
ACS
FIXED CAMERA
DIGITAL 180° FIXED CAMERA
DIGITAL 270° FIXED CAMERA
WIRELESS ACCESS POINT
CCTV
IDS
ALARM KEYPAD
(ALARM INTERFACE)
DOOR POSITION SWITCH
WIDE GAP
DURESS SWITCH
CHAIN LINK FENCE
GENERAL SYMBOLS
DOOR POSITION SWITCH
ELECTRICALLY OPERATED CRASH BAR
REFERENCED NOTE
DETAIL REFERENCE
XX-XXX
UPS
ECB
MAG
K
N
BALANCED MAGNETIC SWITCH
UL LEVEL 2, HIGH SECURITYHS
BALANCED MAGNETIC SWITCH
ES
S
CONTACT/CONTACTLESS CARD READER W/ KEYPAD
K
C/CL
MECHANICAL CIPHER LOCK
W
180 DEGREE
270 DEGREE
D
360° FISH EYE CAMERA
ACP
DURESS
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
ABBREVIATIONS &
SECURITY LEGENDS
BLM-CFO-01-103
01-103
SECTION - GENERAL
DRAWING INDEX
GENERAL SHEET #
BLM-CFO-01-101 COVER SHEET 01 of 20
BLM-CFO-01-102 GENERAL INFORMATION 02 of 20
BLM-CFO-01-103 ABBREVIATIONS AND SECURITY LEGENDS 03 of 20
BLM-CFO-01-104 DRAWING INDEX 04 of 20
BLM-CFO-01-105 EQUIPMENT LIST 05 of 20
PLANS SHEET #
BLM-CFO-10-001 CASPER FIELD OFFICE SITE REFERENCE PLAN 06 of 20
BLM-CFO-10-002 CASPER FIELD OFFICE SITE REFERENCE PLAN WITH CCTV FOV(S) 07 of 20
BLM-CFO-10-003 ENLARGED SECURITY GATE LOCATION SITE PLANS WITH DEVICE LOCATIONS 08 of 20
BLM-CFO-10-101 CASPER FIELD OFFICE FLOOR REFERENCE PLAN 09 of 20
BLM-CFO-10-102 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS 10 of 20
BLM-CFO-10-103 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 11 of 20
BLM-CFO-10-104 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 12 of 20
BLM-CFO-10-105 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 13 of 20
BLM-CFO-10-106 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 14 of 20
BLM-CFO-10-107 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 15 of 20
BLM-CFO-10-108 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 16 of 20
BLM-CFO-10-109 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 17 of 20
BLM-CFO-10-110 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 18 of 20
BLM-CFO-10-111 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 19 of 20
BLM-CFO-10-112 CASPER FIELD OFFICE ENLARGED FLOOR PLAN WITH CCTV FOV(S) AND DEVICE LOCATIONS CONTINUED 20 of 20
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
DRAWING INDEX
BLM-CFO-01-104
01-104
SECTION - GENERAL
EQUIPMENT LIST
NOTE: EQUIPMENT LISTED REPRESENTS PRIMARY COMPONENTS ONLY AND IS NOT AN ALL INCLUSIVE LIST FOR A FULLY FUNCTIONING SYSTEM.
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
EQUIPMENT LIST
BLM-CFO-01-105
01-105
SECTION - GENERAL
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
P
R
O
S
P
E
C
T
O
R
D
P
R
O
S
P
E
C
T
P
R
O S
P
ECTOR
P L
BLM SIGN
P
A
R
K
I
N
G
P
A
R
K
I
N
G
P
A
R
K
I
N
G
P
A
R
K
I
N
G
S
E
C
U
R
E
P
A
R
K
I
N
G
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
P
R
O
S
P
E
C
T
P
R
O
S
P
E
C
T
P
R
O S
P
ECTOR
P L
FLAG POLE
BLM SIGN
P
A
R
K
I
N
G
P
A
R
K
I
N
G
P
A
R
K
I
N
G
P
A
R
K
I
N
G
S
E
C
U
R
P
R
K
I
N
G
A1
10-101
FLOOR PLAN
EXISTING LIGHT POLE TYP.
A4
10-003
SOUTH GATE
A1
10-003
NORTH GATE
C
A
S
P
F
I
E
L
F
I
C
E
A1
BLM-CFO-10-001
10-001
SECTION - PLANS
CASPER FIELD OFFICE
SITE REFERENCE PLAN
N
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
SCALE: 1" = 60'
0'-0" 60'-0"
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
P
R
O
S
P
E
C
T
P
R
O
S
P
E
C
T
P
R O
S P
ECTOR
P
L
A1
10-101
FLOOR PLAN
A4
10-003
SOUTH GATE
A1
10-003
NORTH GATE
C
A
S
P
E
L
F
I
C
E
270 DEGREE
270 DEGREE
270 DEGREE
270 DEGREE
270 DEGREE
270 DEGREE
A1
BLM-CFO-10-002
10-002
SECTION - PLANS
CASPER FIELD OFFICE
SITE REFERENCE PLAN
WITH CCTV FOV(S)
N
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
SCALE: 1" = 60'
0'-0" 60'-0"
C
P
S
E
C
U
R
D
E
U
N
S
E
C
U
R
D
E
EXISTING SECURITY
GATE CONTROLLER
EXISTING OUT BUILDING
EXISTING POLE
EXISTING SECURITY
GATE
EXISTING STANCHION
CARD READER OR STAND IS
BROKEN AND NEEDS TO BE REPLACED.
A C
P
SECURED SIDEUN-SECURED SIDE
K
EXISTING SECURITY
GATE CONTROLLER
EXISTING SECURITY GATE
EXISTING STANCHION
BLM-CFO-10-003
10-003
SECTION - PLANS
ENLARGED SECURITY
GATE LOCATION SITE
PLANS WITH DEVICE
LOCATIONS
NORTH GATE SITE PLAN
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
ADDITIONAL INFO
A4
0'-0" 8'-0"
SCALE: 1/8" = 1'
N
0'-0" 8'-0"
SCALE: 1/8" = 1'
N
SOUTH GATE SITE PLAN
A4
COMPONENT WIRING DETAILSSYMBOL
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
K
CARD READER W/ KEYPAD
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
SEE DETAIL
ACCESSS CONTROL PANEL
ACP
A1/53-102
A1/53-105
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETAILSSYMBOL
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
K
CARD READER W/ KEYPAD
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
SEE DETAIL
ACCESS CONTROL PANEL
ACP
EQUIPMENT REFERENCE CHART
A1/53-102
A1/53-105
NOTES:
INSTALL NEW STAND-ALONE ACCESS
CONTROL PANEL. EXACT MOUNTING
LOCATIONS OF ACCESS CONTROL PANEL
SHALL BE VERIFIED BY ONSITE
REPRESENTATIVE PRIOR TO INSTALLATION.
EXISTING CARD READER TO BE REPLACED
WITH NEW.
NOTES:
INSTALL NEW STAND-ALONE ACCESS
CONTROL PANEL. EXACT MOUNTING
LOCATIONS OF ACCESS CONTROL PANEL
SHALL BE VERIFIED BY ONSITE
REPRESENTATIVE PRIOR TO INSTALLATION.
EXISTING CARD READER TO BE REPLACED
WITH NEW.
10-10310-102
10-105
10-104
10-106
10-10710-108
10-109 10-110 10-111 10-112
10-108 10-109 10-107 10-110 10-106 10-111 10-105 10-112
10-103 10-10410-102 10-105
BLM-CFO-10-101
10-101
SECTION - PLANS
CASPER FIELD OFFICE
FLOOR REFERENCE PLAN
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 25'-0"
SCALE: 1" = 25'
N
OFFICE SPACE
READY ROOM
FIRE OFFICE
STORAGE
RESTROOM
BOILER
ELEC.
RESTROOM
CORRIDOR
ES
K
FIRE CACHE
ES
K
DOOR-103
CAM-103
DOOR-102
CAM-102
10-10510-106
4 5
CAM-111
270 DEGREE
2 3
2 3
BLM-CFO-10-102
10-102
SECTION - PLANS
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
NOTES:
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
EXISTING CARD READER TO BE REPLACED WITH NEW.
ALL EXTERIOR ACS DOORS SHALL ALSO BE EQUIPPED WITH DOOR CLOSER, LATCH
PROTECTOR AND SECURITY HINGES.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
EXISTING DOOR POSITION SWITCH TO BE REPLACED WITH NEW.
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETAILSSYMBOL
K
FIXED INTERIOR 1MP CAMERA
CARD READER W/ KEYPAD
RE-USE REQUEST TO EXIT
RE-USE DOOR POSITION SWITCH
CAT6 PLENUM
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
S
STROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/51-103
A1/53-105
A4/52-104
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
EXISTING
EXISTING
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
N
CAT6 PLENUM A1/51-101
270 DEGREE CAMERA
FIRE CACHE
WAREHOUSE
FIRE GARAGE
K
CORRIDOR
DOOR-104
CAM-104
OVERHEAD DOOR
OVERHEAD DOOR
10-10410-105
ES
S
5 6
S
5 6
CAM-113
270 DEGREE
7CAM-116
BLM-CFO-10-103
10-103
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
K
FIXED INTERIOR 1MP CAMERA
CARD READER W/ KEYPAD
RE-USE DOOR POSITION SWITCH
CAT6 PLENUM
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/51-103
A1/53-105
EXISTING
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
NOTES:
EXISTING CARD READER, REX, AND ELECTRIC STRIKE TO BE REPLACED WITH NEW.
ALL EXTERIOR ACS DOORS SHALL ALSO BE EQUIPPED WITH DOOR CLOSER, LATCH
PROTECTOR AND SECURITY HINGES.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
EXISTING - SEE NOTE 2 BELOW
N
REQUEST TO EXIT
A1/53-108
4C 18 AWG STRANDED
SHIELDED PLENUM WIRE
ES
ELECTRIC STRIKE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
TBD/53-108
CAT6 PLENUM
270 DEGREE CAMERA
A1/51-101
270 DEGREE
SSTROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A4/52-104
WAREHOUSE
WATER LAB WAREHOUSE
CAM-105
OVERHEAD DOOR
OVERHEAD DOOR
DOOR-105
OVERHEAD DOOR
SEE SHEET 10-105 FOR
CAM-106 LOCATION
DOOR-106
10-103
CAM-112
270 DEGREE
MAG
MAG
BLM-CFO-10-104
10-104
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETAILSSYMBOL
K
CARD READER W/ KEYPAD
RE-USE DOOR POSITION SWITCH
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/53-105
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
EXISTINGEXISTING - SEE NOTE 2 BELOW
FIXED INTERIOR 1MP CAMERA CAT6 PLENUM A1/51-103
NOTES:
EXISTING CARD READER TO BE REPLACED WITH NEW. INSTALL NEW REX AND RE-USE
ALL OTHER EXISTING ACCESS CONTROL EQUIPMENT.
ALL EXTERIOR ACS DOORS SHALL ALSO BE EQUIPPED WITH DOOR CLOSER, LATCH
PROTECTOR AND SECURITY HINGES.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
REQUEST TO EXIT
A1/53-108
4C 18 AWG STRANDED
SHIELDED PLENUM WIRE
CAT6 PLENUM
270 DEGREE CAMERA
A1/51-101
270 DEGREE
MAG
ELECTROMAGNETIC LOCK EXISTING
EXISTING - SEE NOTE 2 BELOW
RESTROOM
RESTROOM
STORAGE
MOD.
WATER LAB WAREHOUSE
WATER LAB
BATT.
WAREHOUSE
MOD.
OPEN WORK AREAOFFICE
CORRIDOR
BOILER
10-10310-102
CAM-106
SEE SHEET 10-104 FOR
EXTENDED FOV
10-11210-111
CAM-114
S
S
S
S
BLM-CFO-10-105
10-105
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETAILSSYMBOL
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
FIXED INTERIOR 1MP CAMERA CAT6 PLENUM A1/51-103
NOTES:
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
SSTROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A4/52-104
K
K
ES
CONFERENCE ROOM
CORRIDOR
CONFERENCE ROOM TELECOMUNNICATIONS OFFICE SPACE
OFFICE
ELECTRICAL
JANITOR
RESTROOM
RESTROOM
CORRIDOR
CONFERENCE ROOMMANAGER
PUBLIC AREA
VALVES
BOILER
RECEPTION
VESTIBULE
MAG
K
MAIN ENTRY SLIDING
GLASS DOOR
MAIN ENTRY
VESTIBULE DOOR
DOOR-114
DOOR-118
CAM-109
DOOR-113
CAM-110
DOOR-116
DOOR-117
CAM-108
MAG
K
DOOR-115
10-11110-110
LOBBY
A C
P
3 4
10-102
CONFERENCE
ROOM
3 4
BLM-CFO-10-106
10-106
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
K
FIXED INTERIOR 1 MP CAMERA
CARD READER W/ KEYPAD
REQUEST TO EXIT
RE-USE DOOR POSITION SWITCH
CAT6 PLENUM
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/51-103
S
STROBE
RE-USE MAGNETIC LOCK
RE-USE PUSH BUTTON
MAG
DURESS SWITCH
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/53-105
A1/52-104
EXISTING
EXISTING
A1/53-108
EXISTING
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
AUTO
RE-USE AUTO DOOR OPENER
EXISTING
ACP
SEE DETAIL
ACCESS CONTROL PANEL
A1/53-102
NOTES:
EXACT MOUNTING LOCATIONS OF ACCESS CONTROL PANEL SHALL BE VERIFIED BY ONSITE
REPRESENTATIVE PRIOR TO INSTALLATION.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
EXISTING CARD READER TO BE REPLACED WITH NEW. RE-USE ALL OTHER EXISTING
ACCESS CONTROL EQUIPMENT.
INSTALL NEW CLIENT COMPUTER WITH MONITOR FOR CCTV
SUPERVISION. EXACT LOCATION TO BE DETERMINED BY AUTHORIZED
ON-SITE PERSONNEL.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL NEW CARD READER, REQUEST TO EXIT, DOOR POSITION
SWITCH, ELECTRIC STRIKE AND REQUEST TO EXIT.
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
4C 18 AWG STRANDED
SHIELDED PLENUM WIRE
ES
ELECTRIC STRIKE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
TBD/53-108
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
A4/52-104
CLIENT WORKSTATION
WITH MONITOR
D1/51-105
D4/54-103
MAG
K
CENTRAL FILES
COPY ROOM
OPEN WORK AREA
PROPRIETARY FILES
CORRIDORCORRIDOR
10-11010-109
DOOR-110
DOOR-111
32 32 32
3 2
BLM-CFO-10-107
10-107
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
K
CARD READER W/ KEYPAD
RE-USE REQUEST TO EXIT
RE-USE DOOR POSITION SWITCH
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
RE-USE MAGNETIC LOCK
RE-USE PUSH BUTTON
MAG
A1/53-105
EXISTING
EXISTING
EXISTING
EXISTING
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
NOTES:
EXISTING CARD READER TO BE REPLACED WITH NEW. RE-USE ALL OTHER EXISTING
ACCESS CONTROL EQUIPMENT.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
S
STROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A4/52-104
B
MAG
E C
B
MAG
K
OPEN WORK AREA
LAW
EVIDENCE
LAW
CORRIDOR
DOOR-101
DOOR-109
CAM-101
DOOR-108
10-109
CAM-113
2 3
DISTRICT
MANAGER
ASSOCIATE
DISTRICT MANAGER
BLM-CFO-10-108
10-108
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
K
CARD READER W/ KEYPAD
RE-USE REQUEST TO EXIT
RE-USE DOOR POSITION SWITCH
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
RE-USE MAGNETIC LOCK
RE-USE PUSH BUTTON
MAG
A1/53-105
EXISTING
EXISTING
EXISTING
EXISTING
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
NOTES:
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
EXISTING CARD READER TO BE REPLACED WITH NEW. RE-USE ALL EXISTING ACCESS
CONTROL EQUIPMENT.
ALL EXTERIOR ACS DOORS SHALL ALSO BE EQUIPPED WITH DOOR CLOSER, LATCH
PROTECTOR AND SECURITY HINGES.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
INSTALL NEW CLIENT COMPUTER WITH MONITOR FOR CCTV SUPERVISION. EXACT
LOCATION TO BE DETERMINED BY AUTHORIZED ON-SITE PERSONNEL.
RE-USE ELECTRIC CRASH BAR
ECB
EXISTINGEXISTING - SEE NOTE 2 BELOW
SSTROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
FIXED INTERIOR 1 MP CAMERA CAT6 PLENUM A1/51-103
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
A4/52-104
CAT6 PLENUM
270 DEGREE CAMERA
A1/51-101
270 DEGREE
CLIENT WORKSTATION
WITH MONITOR
D1/51-105
D4/54-103
OPEN WORK AREA
10-108 10-107
1 2
1 2
CAM-117
BLM-CFO-10-109
10-109
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
S
STROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
NOTES:
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
A4/52-104
CAT6 PLENUM
270 DEGREE CAMERA
A1/51-101
CONFERENCE ROOM
COPY ROOM
RESTROOMRESTROOM
BREAK ROOM
CONFERENCE ROOM
OPEN WORK AREA
10-10610-107
2 3
OFFICE
OFFICE OFFICE
2 3
2 3
BLM-CFO-10-110
10-110
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
S
STROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
NOTES:
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
ES
OPEN WORK AREA
CORRIDOR
OPEN WORK AREA
OFFICEOFFICE
OFFICE SPACE
TELECOMMUNCATIONS
DOOR-112
ACP
DURESS
UPS
NVR
WIRELESS
10-106 10-105
K
C/CL
OFFICE
BLM-CFO-10-111
10-111
SECTION - PLANS
A1
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAN
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
REQUEST TO EXIT
DOOR POSITION SWITCH
A1/53-108
TBD/53-107
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
ACP
SEE DETAIL
ACCESS CONTROL PANEL
A1/53-101
NOTES:
EXACT MOUNTING LOCATIONS OF ACCESS CONTROL PANEL, DURESS SYSTEM AND
SERVER SHALL BE VERIFIED BY ONSITE REPRESENTATIVE PRIOR TO INSTALLATION.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS'
CONTRACTOR TO PROCURE AND INSTALL A NEW UPS THAT IS CAPABLE OF SUPPLYING
POWER TO THE ACCESS CONTROL SYSTEM, DURESS SYSTEM AND THE CCTV SYSTEM FOR
A MINIMUM OF 30 MINUTES.
INSTALL ACCESS CONTROL AT THIS DOOR WITH A HID - RKCL40 CARD READER.
INSTALL NEW REX, DOOR POSITION SWITCH, AND ELECTRIC STRIKE.
INSTALL NEW NVR FOR NEW CCTV SYSTEM. NVR WILL BE RACK MOUNTED AND THE EXACT
LOCATION WILL BE DETERMINED BY ONSITE REPRESENTATIVE PRIOR TO INSTALLATION.
INSTALL NEW CLIENT COMPUTER WITH MONITOR FOR ACCESS CONTROL AND CCTV
SUPERVISION. EXACT LOCATION TO BE DETERMINED BY AUTHORIZED ON-SITE PERSONNEL.
DURESS
SEE DETAIL
DURESS SYSTEM
A1/52-103
UNINTERRUPTIBLE
POWER SUPPLY
UPS
NETWORK VIDEO RECORDER
NVR
E1/54-102
WIRELESS
DURESS WIRELESS RECEIVER
AND WIRELESS PUSHBUTTONS
D1//52-104
D4/52-104
ES
ELECTRIC STRIKE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
TBD/53-108
N
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
CLIENT WORKSTATION
WITH MONITOR
TBD
D1/51-105
D4/54-103
K
C/CL
CONTACT/ CONTACTLESS
CARD READER W/ KEYPAD
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
A1/53-106
4C 18 AWG STRANDED
SHIELDED PLENUM WIRE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
SSTROBE
2C 18 AWG STRANDED
SHIELDED PLENUM WIRE
B
K
OPEN WORK AREA
MANAGER
CORRIDOR
OPEN WORK AREA
10-105
DOOR-107
CAM-107
5 6
OFFICE
5 65 6
CAM-115
BLM-CFO-10-112
10-112
SECTION - PLANS
A1
N
MARK DATE
SHEET OF
2 3 4 5 6 7
1 2 3 4 5 6 7
A
B
C
D
E
F
DESCRIPTION
A
B
C
D
E
F
DESIGN BY
PROJECT IDENTIFICATION
CONTRACT NUMBER:
CAD DWG FILE:
DRAWN BY:
DESIGNED / CHECKED BY:
DATE:
SHEET TITLE
THIS BOX 2" @ 24x36
CLIENTELE
THIS BOX 1" @ 11x17
L. MORGAM
K.E.
140L6220P0043
JUNE 27, 2020
6-27-201
INTEGRATED SECURITY
SOLUTIONS, INC.
108 COOPERATIVE WAY
KALISPELL, MT 59901
PHONE: 406-755-2504
BUREAU OF LAND
MANAGEMENT
NATIONAL OPERATIONS
CENTER
BLM WYOMING
STATEWIDE SECURITY
SYSTEM DESIGN
BID SET
CASPER FIELD OFFICE
0'-0" 8'-0"
SCALE: 1/8" = 1'
KEY PLAN
10-102 10-103
10-108 10-107
10-106 10-105
10-104
10-109 10-110 10-111 10-112
EQUIPMENT REFERENCE CHART
COMPONENT WIRING DETIALSSYMBOL
K
CARD READER W/ KEYPAD
RE-USE REQUEST TO EXIT
RE-USE DOOR POSITION SWITCH
6C 18 AWG STRANDED
SHIELDED PLENUM WIRE
FIXED INTERIOR 1MP CAMERA CAT6 PLENUM
RE-USE MAGNETIC LOCK
MAG
A1/51-103
A1/53-105
EXISTING
EXISTING
EXISTING
RE-USE ELECTRIC CRASH BAR
ECB
EXISTINGEXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
EXISTING - SEE NOTE 2 BELOW
GENERAL EQUIPMENT NOTES:
1. ALL DEVICES SHOWN ARE NEW UNLESS NOTED OTHERWISE.
2. ALL WIRING TO MEET MANUFACTURER SPECIFICATIONS. REPLACE WIRING AS NEEDED.
3. REFER TO DETAILS PACKAGE SHEET 50-101 FOR FURTHER INFORMATION ON EQUIPMENT.
NOTES:
EXISTING CARD READER TO BE REPLACED WITH NEW. RE-USE ALL OTHER EXISTING
ACCESS CONTROL EQUIPMENT.
ALL EXTERIOR ACS DOORS SHALL ALSO BE EQUIPPED WITH DOOR CLOSER, LATCH
PROTECTOR AND SECURITY HINGES.
INSTALL NEW INTERIOR 1MP CAMERA AND INTEGRATE INTO NEW CCTV SYSTEM.
INSTALL HARD-WIRED DURESS SWITCH AT THE RECEPTIONIST COUNTER AND CONNECT IT
TO THE BOSCH B9512G. ACTIVATION OF THE DURESS SWITCH SHALL ANNUNCIATE
CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF OFFICES AND BREAK
ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR COMMUNICATION.
TWO WIRELESS DURESS SWITCHES SHALL BE PROVIDED AND INTEGRATED INTO THE
BOSCH B9512G THROUGH A WIRELESS RECEIVER. ACTIVATION OF THE DURESS SWITCH
SHALL ANNUNCIATE CONTRACTOR INSTALLED HORNS WITH STROBES IN THE STAFF
OFFICES AND BREAK ROOM, AND SHALL NOTIFY LOCAL AUTHORITIES THROUGH CELLULAR
COMMUNICATION. POWER FOR THE WIRELESS RECEIVER SHALL BE CONNECTED TO THE UPS.
INSTALL NEW EXTERIOR 270 DEGREE CAMERA WITH BUILT IN IR ILLUMINATOR AND
INTEGRATE INTO THE NEW CCTV SYSTEM.
CASPER FIELD OFFICE
ENLARGED FLOOR PLAN
WITH CCTV FOV(S) AND
DEVICE LOCATIONS
CONTINUED
CAT6 PLENUM
270 DEGREE CAMERA
A1/51-101
File details come from the government source that posted it. Updated .