Material ID.pdf
PDF 2 MB Posted
- Attached to
- Install ACU unit in several buildings Federal contract opportunity
- Solicitation number
- 1333ND25RNB190003
About this file
This is a Homogeneous Material Sampling/Analytical Summary report for Building 226 at NIST documenting asbestos-containing materials (ACM) testing results. The report details various duct sealants, pipe insulation, and other building materials that were tested for asbestos content using Polarized Light Microscopy (PLM) analysis.
Several materials tested positive for Chrysotile asbestos, including: hard tan duct sealant (DS04) at 4% asbestos, red duct sealant (DS05) at 2-6% asbestos, dark brown pliable duct sealant (DS06) at 3% asbestos, and brown duct pin adhesives (MA04 and MA05) at 10-20% asbestos. The report also identifies multiple Presumed Asbestos-Containing Materials (PACM) including pipe fittings, pipe hangers, and various types of pipe insulation. Total quantities are provided for each material type, measured in linear feet (LF), square feet (SF), or count (EA). Materials are classified by type (Surfacing, Thermal, or Miscellaneous) and friability status (Friable or Non-Friable Category I/II).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| NIST B226 Replace HVAC 100 Submission Specs.pdf | ||
| Amendment 001.docx | DOCX document | |
| Guidelines for Contractors and A-E firms - March 11 2024.pdf | ||
| OFPM Asbetos-containing-material-master-specs_-05012021_Official.docx | DOCX document | |
| RFI Reponses 071723.pdf | ||
| Material Inventory.pdf | ||
| Guidelines for Contractors and A-E firms - May 25 2022.docx | DOCX document | |
| FAQ Response Package 20231129.pdf | ||
| NIST B226 Replace HVAC Final Submission Dwgs.pdf | ||
| PAYNE-NIST Sprayed Coil Liquid Defrost Air Handler SEQUENCE OF OPERATIONS 210112b.pdf | ||
| NIST B226 Replace HVAC 100 Submission BOD.pdf | ||
| md53 wage rates.txt | TXT text file | |
| FormSF1442.pdf |
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HOMOGENEOUS MATERIAL (AREA) SAMPLING/ANALYTICAL SUMMARY
NIST GB - Building 226
MATERIAL CODE:
DS03
ACM STATUS:
ND
MATERIAL DESCRIPTION:
Gray pliable duct sealant
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
3 LF per each
COMMENTS:
APPROXIMATE TOTAL QUANTITY
305 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS03-01 A310-A on duct, 1' from east wall, 8' from floor NDPLM 0.00%
DS03-02 A356 Duct; 7'F, 1'E, 2'N NDPLM 0.00%
DS03-03 MR-28 5'U, 13'W, 16'N NDPLM 0.00%
MATERIAL CODE:
DS04
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Hard tan duct sealant associated caulk gun applied with squared HVAC duct
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
5 lf per each
COMMENTS:
APPROXIMATE TOTAL QUANTITY
26 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS04-01 B232 Duct; 9'F, 18'N, 12'W ACMPLM 4.00% Chrysotile
DS04-02 A120 Duct; 13'F, 2'W, 9'S NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
Date Printed: 7/19/2023
MATERIAL CODE:
DS05
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Red duct sealant associated with duct
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
2 LF each
COMMENTS:
APPROXIMATE TOTAL QUANTITY
641 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS05-01 SCB105 Duct; 1'F, 1'N, 1'W ACMPLM 2.00% Chrysotile
DS05-02 MR-31 7'F, 8'E, 15'N on duct ACMPLM 6.00% Chrysotile
MATERIAL CODE:
DS06
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Dark brown pliable duct sealant
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
80 LF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS06-01 SCB302 1'F, 0'N, 3'E ACMPLM 3.00% Chrysotile
DS06-02 JM34 Duct; 0'S, 12'W,4'F NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
DS05
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Red duct sealant associated with duct
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
2 LF each
COMMENTS:
APPROXIMATE TOTAL QUANTITY
641 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS05-01 SCB105 Duct; 1'F, 1'N, 1'W ACMPLM 2.00% Chrysotile
DS05-02 MR-31 7'F, 8'E, 15'N on duct ACMPLM 6.00% Chrysotile
MATERIAL CODE:
DS06
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Dark brown pliable duct sealant
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
80 LF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DS06-01 SCB302 1'F, 0'N, 3'E ACMPLM 3.00% Chrysotile
DS06-02 JM34 Duct; 0'S, 12'W,4'F NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
DT01
ACM STATUS:
ND
MATERIAL DESCRIPTION:
White canvas duct wrap with white sealant and foil backing associated with lab fume hood duct tape
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
62472 SF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DT01-01 B309-A Duct 8' from floor 3' from N, 3' from E foil backing NDPLM 0.00% wrap NDPLM 0.00%
DT01-02 B345 3' above floor, N wall, 19' E foil backing NDPLM 0.00% wrap NDPLM 0.00%
MATERIAL CODE:
DT02
ACM STATUS:
ND
MATERIAL DESCRIPTION:
Older cloth duct wrap with foil and yellow mastic
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
70 SF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DT02-01 B232 Duct, 10' floor, 3' N, 11' W foil with mastic NDPLM 0.00% wrap NDPLM 0.00%
DT02-02 B232 8'F, 2'N, 7'W NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
DT03
ACM STATUS:
ND
MATERIAL DESCRIPTION:
White duct tape associated with mechanical room
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
360 LF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
DT03-01 MR-W 6'F, 20'S, 9'W NDPLM 0.00%
DT03-02 DJ34 6'F,14'N, 1'W
MATERIAL CODE:
EJM01
ACM STATUS:
ND
MATERIAL DESCRIPTION:
Gray expansion joint material
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
247 LF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
EJM01-01 XS2 S wall, 4'F, 0'E NDPLM 0.00%
EJM01-02 XS4 S wall, 4'F, 2'U NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
MA04
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Brown hard duct pin adhesive associated with DT01
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
61930 SF
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
MA04-01 B232 10'Floor, 3'N, 10'W ACMPLM 10.00% Chrysotile
MATERIAL CODE:
MA05
ACM STATUS:
ACM
MATERIAL DESCRIPTION:
Dark brown remnant duct pin adhesive
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
14 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
MA05-01 B232 Duct; 16'N, 12'W ACMPLM 20.00% Chrysotile
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
PF01
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
Pipe fittings
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
3496 EA
MATERIAL CODE:
PF02
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
Hard mag pipe fitting/hanger assoc. 3' wide air o cell insulation
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
148 SF
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
PH01
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
Hard pipe hanger associated with PI01
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
111 EA
MATERIAL CODE:
PI01
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
Cloth wrapped over fiberglass pipe insulation with black tar mastic
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
20419 LF
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
PI02
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
Hard mag pre-formed pipe insulation
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
1356 LF
MATERIAL CODE:
PI03
ACM STATUS:
PACM
MATERIAL DESCRIPTION:
3' wide Aire-o-cell insulation
MATERIAL TYPE:
T
FRIABILITY:
F
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
798 SF
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
MATERIAL CODE:
PS01
ACM STATUS:
ND
MATERIAL DESCRIPTION:
White painted on pipe sealant associated with newer fiberglass pipe insulation
MATERIAL TYPE:
M
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
871 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
PS01-01 A316-1 Pipe 6' from floor, 3' from N, 3' from E NDPLM 0.00%
PS01-02 B232-A 6'N, 4'E, 2' from floor NDPLM 0.00%
MATERIAL CODE:
PS02
ACM STATUS:
ND
MATERIAL DESCRIPTION:
White painted end associated with Hard foam non suspect insulation
MATERIAL TYPE:
T
FRIABILITY:
NF II
CLASSIFICATION
COMMENTS:
APPROXIMATE TOTAL QUANTITY
143 EA
SAMPLE # ROOM/LOC SAMPLE LOCATION DESCRIPTION ANALYTICAL SUMMARY
Method Material / Layer Asbestos % and TypeResult
PS02-01 MR-31 5'U, 8'S, 6'W NDPLM 0.00%
PS02-02 MR-W 6'u, 8's, 6'w NDPLM 0.00%
MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M=Miscellaneous, FRIABILITY: F= Friable, NF I = Non-Friable Category I, NF II = Non-Friable Category I METHOD: NAA= Not Analyzed – Assumed, NAPS=Not Analyzed - Positive Stop, PLM= Polarized Light Microscopy - Visual Estimate, Point Count= Polarized Light Microscopy - Point Count Method, RESULT: ND = None Detected (No Asbestos Detected), TR/TR-1% = (< or = 1% Asbestos Content), LOCATION: N=North, S=South, E=East, W=West, f=from, ff= feet from MATERIAL TYPE: S=Surfacing, T=Thermal System Insulation, M= Misc Material, MATERIAL FRIABILITY: F=Friable, NF I = Category I Non-Friable, NF II = Category II Non-Friable QUANTITY: SF=Square Feet, LF=Linear Feet, EA=Each
File details come from the government source that posted it. Updated .