5Mhz Transmitter to be replaced foot print.docx
DOCX document 507 KB Posted
- Attached to
- WWVH 5MHz, 10kW Timing Transmitter
- Solicitation number
- 1333ND23QNB680356
About this file
This document outlines specifications for replacing an existing 5MHz transmitter located in a generator room. The new transmitter is to be positioned in approximately the same 2'6" x 4' footprint as the current unit. It will require a 3-phase 208V AC disconnect mounted on the rear wall and a conduit running under the concrete floor to a junction box on the bottom left rear. The related federal contract opportunity is solicitation number 1333ND23QNB680356 from the Department of Commerce National Institute of Standards and Technology to provide a new 5MHz, 10kW timing transmitter for the WWVH facility. The opportunity type is a solicitation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5Mhz Transmitter to be replaced foot print ~ 2’6” x 4’. New Transmitter to position in the approximate location.
3 phase 208 V ac disconnect for 5Mhz mounted on wall to the rear of the transmitter.
From the disconnect a conduit runs under the concrete floor to a junction box located bottom left to the rear of the transmitter.
100 amp circuit breaker. Located in the generator room.
5 Mhz antennas image5.jpeg image1.jpeg image2.jpeg image3.jpeg image4.jpeg
File details come from the government source that posted it. Updated .