Attachment 5 - ASCE Design Hazards Report (8 Pages).pdf
PDF 2 MB Posted
- Attached to
- Elkhorn Trail Bridge
- Solicitation number
- 1240LP27Q0002
- Issued by
-
Department of Agriculture Forest Service
About this file
This is an ASCE Hazards Report generated from the ASCE Hazard Tool, providing design hazard data for a location at latitude 40.95144, longitude -106.946294 (elevation 8,133.55 feet, NAVD 88) in Risk Category II under the ASCE/SEI 7-22 standard. The report was accessed on April 16, 2026.
The report documents multiple environmental hazard parameters relevant to structural design. Wind design data indicates a primary wind speed of 106 mph (700-year MRI) at 33 feet above ground in Exposure C Category, with 10-year through 100-year MRI values ranging from 77 to 92 mph for Service Level calculations. Seismic design parameters are classified as Seismic Design Category B, with PGA of 0.18g, SMS of 0.34, SM1 of 0.11, and design spectral values SDS of 0.23 and SD1 of 0.076. Ice hazard data shows 0.20 inches equivalent radial thickness at concurrent temperature of 5°F with 60 mph gust speed. Ground snow load is specified at 240 pounds per square foot (133.03 lb/ft² for 20-year MRI), with a mapped elevation of 8,435.4 feet and winter wind parameter of 0.45. Precipitation intensity values are 4.84 inches per hour for 15-minute duration and 1.76 inches per hour for 60-minute duration. The site is located in FEMA Flood Zone X (unshaded/no flood hazard), is not in a mapped tsunami design zone, and tornado analysis is not applicable to Risk Category 2 structures. The report emphasizes that this tool provides informational data only and does not replace professional engineering judgment.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ASCE Hazards Report Address:
No Address at This Location
Standard: ASCE/SEI 7-22 Latitude: 40.95144
Risk Category: II Longitude: -106.946294
Soil Class: Default Elevation: 8133.553992996816 ft
(NAVD 88)
Wind
Results:
Wind Speed 106 Vmph
10-year MRI 77 Vmph
25-year MRI 83 Vmph
50-year MRI 88 Vmph
100-year MRI 92 Vmph
300-year MRI 100 Vmph
700-year MRI 106 Vmph
1,700-year MRI 112 Vmph
3,000-year MRI 116 Vmph
10,000-year MRI 125 Vmph
100,000-year MRI 142 Vmph
1,000,000-year MRI 158 Vmph
Data Source: ASCE/SEI 7-22, Fig. 26.5-1B and Figs. CC.2-1–CC.2-4, and Section 26.5.2
Date Accessed: Thu Apr 16 2026
Page 1 of 8https://ascehazardtool.org/ Thu Apr 16 2026
Appendix IV: ASCE Design Hazards Report https://ascehazardtool.org/
Value provided is 3-second gust wind speeds at 33 ft above ground for Exposure C Category, based on linear interpolation between contours. Wind speeds are interpolated in accordance with the 7-22 Standard. Wind speeds correspond to approximately a 7% probability of exceedance in 50 years (annual exceedance probability = 0.00143, MRI = 700 years). Values for 10-year MRI, 25-year MRI, 50-year MRI and 100-year MRI are Service Level wind speeds, all other wind speeds are Ultimate wind speeds.
Site is not in a hurricane-prone region as defined in ASCE/SEI 7-22 Section 26.2.
Page 2 of 8https://ascehazardtool.org/ Thu Apr 16 2026
PGA M : 0.18
SMS : 0.34
SM1 : 0.11
SDS : 0.23
SD1 : 0.076
TL : 4
SS : 0.29
S1 : 0.054
VS30 : 260
Seismic Design Category: B
Multi-Period Design Spectrum
S (g) vs T(s)a
Multi-Period MCE SpectrumR
S (g) vs T(s)a
Two-Period Design Spectrum
S (g) vs T(s)a
Two-Period MCE SpectrumR
S (g) vs T(s)a
Design Vertical Response Spectrum
Vertical ground motion data has not yet been made available by USGS.
MCE Vertical Response SpectrumR
Vertical ground motion data has not yet been made available by USGS.
Seismic
DefaultSite Soil Class:
Results:
Page 3 of 8https://ascehazardtool.org/ Thu Apr 16 2026
Data Accessed: Thu Apr 16 2026
Date Source:
USGS Seismic Design Maps based on ASCE/SEI 7-22 and ASCE/SEI 7-22 Table 1.5-2. Additional data for site-specific ground motion procedures in accordance with ASCE/SEI 7-22 Ch. 21 are available from USGS.
Page 4 of 8https://ascehazardtool.org/ Thu Apr 16 2026
Ice
Results:
Data Source:
Date Accessed:
Ice Thickness: 0.20 in.
Concurrent Temperature: 5 F
3-s Gust Speed 60 mph
Standard ASCE/SEI 7-22, Figs. 10-2 through 10-8
Thu Apr 16 2026
Ice thicknesses on structures in exposed locations at elevations higher than the surrounding terrain and in valleys and gorges may exceed the mapped values.
Values provided are equivalent radial ice thicknesses due to freezing rain for 250, 500, 1,000, and 1,400-year mean recurrence intervals along with concurrent 3-s gust speeds and concurrent air temperatures. The shading indicates special icing regions, with elevations above 2,100 ft (640 m) in the east, 6,000 ft (1829 m) in the west, and 1,600 ft (488 m) in Alaska, with sparse weather station data for determining design ice loads. In these regions, as well as in regions with complex terrain causing unusual icing conditions and regions where snow or in-cloud icing results in larger loads, the mapped values should be adjusted based on a combination of local historical records and experience, reanalysis data, and numerical weather prediction systems.
Snow
Results:
Ground Snow Load, p : 240 lb/ftg
20-year MRI Value: 133.03 lb/ft^2
Winter Wind Parameter: 0.45
Mapped Elevation: 8435.4 ft
Data Source: ASCE/SEI 7-22, Figures 7.6-1 and 7.6-2 A-D
Date Accessed: Thu Apr 16 2026
Values provided are ground snow loads. In areas designated "case study required," extreme local variations in ground snow loads preclude mapping at this scale. Site-specific case studies are required to establish ground snow loads at elevations not covered.
Snow load values are mapped to a 0.5 mile resolution.
This resolution can create a mismatch between the mapped elevation and the site-specific elevation in topographically complex areas. Engineers should consult the local authority having jurisdiction in locations where the reported ‘elevation’ and ‘mapped elevation’ differ significantly from each other.
Ground Snow Loads for IRC only, p :g(asd) 168.0 lb/ft
Page 5 of 8https://ascehazardtool.org/ Thu Apr 16 2026
Rain
Data Source:
Date Accessed:
15-minute Precipitation Intensity: 4.84 in./h
60-minute Precipitation Intensity: 1.76 in./h
NOAA National Weather Service, Precipitation Frequency Data Server, Atlas 14(https:// www.nws.noaa.gov/oh/hdsc/) Thu Apr 16 2026
Page 6 of 8https://ascehazardtool.org/ Thu Apr 16 2026 https://www.nws.noaa.gov/oh/hdsc/ https://www.nws.noaa.gov/oh/hdsc/
Flood
Data Source:
Date Accessed:
FIRM Panel:
Insurance Study Note:
Flood Zone Categorization: X (unshaded)
Base Flood Elevation:
FEMA National Flood Hazard Layer - Effective Flood Hazard Layer for US, where modernized (https:// msc.fema.gov/portal/search) Thu Apr 16 2026
If available, download FIRM panel here
Download FEMA Flood Insurance Study for this area here
Tsunami
Results:
Data Source:
Date Accessed:
Tsunami: Not in mapped tsunami design zone.
ASCE Tsunami Design Geodatabase
Thu Apr 16 2026
Page 7 of 8https://ascehazardtool.org/ Thu Apr 16 2026 https://msc.fema.gov/portal/search https://msc.fema.gov/portal/search https://msc.fema.gov/portal/search https://msc.fema.gov/portal/search http://asce7tsunami.online
Tornado
Not Applicable to Risk Category 2
The ASCE Hazard Tool is provided for your convenience, for informational purposes only, and is provided “as is” and without warranties of any kind. The location data included herein has been obtained from information developed, produced, and maintained by third party providers; or has been extrapolated from maps incorporated in the ASCE standard. While ASCE has made every effort to use data obtained from reliable sources or methodologies, ASCE does not make any representations or warranties as to the accuracy, completeness, reliability, currency, or quality of any data provided herein. Any third-party links provided by this Tool should not be construed as an endorsement, affiliation, relationship, or sponsorship of such third-party content by or from ASCE.
ASCE does not intend, nor should anyone interpret, the results provided by this Tool to replace the sound judgment of a competent professional, having knowledge and experience in the appropriate field(s) of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the contents of this Tool or the ASCE standard.
In using this Tool, you expressly assume all risks associated with your use. Under no circumstances shall ASCE or its officers, directors, employees, members, affiliates, or agents be liable to you or any other person for any direct, indirect, special, incidental, or consequential damages arising from or related to your use of, or reliance on, the Tool or any information obtained therein. To the fullest extent permitted by law, you agree to release and hold harmless ASCE from any and all liability of any nature arising out of or resulting from any use of data provided by the ASCE Hazard Tool.
Page 8 of 8https://ascehazardtool.org/ Thu Apr 16 2026
File details come from the government source that posted it. Updated .