Amendment 001- 1240BE26Q0119 - Salient Characteristics.docx
DOCX document 17 KB Posted
- Attached to
- K - 4, 000-Gallon Water Tender Unit
- Solicitation number
- 1240BE26Q0119
- Issued by
-
Department of Agriculture Forest Service
About this file
This is an Amendment to a Salient Characteristics specification document for a 4,000-gallon water tender unit to be procured by the Department of Agriculture Forest Service under Solicitation Number 1240BE26Q0119. The specification details a complete water tender system to be installed on an existing 2021 Kenworth T880 truck chassis (VIN: 1NKZX4EX8MJ460912) configured for quick-change operation, allowing the vehicle to interchange between water tender, dump bed, and fifth-wheel configurations with minimal tools in 30 minutes or less.
The water tender tank is specified as a 4,000-gallon 6V-15 Vision Tank in a modified trapezoid design with dimensions of 15 feet in length, 102 inches in width, and 66 inches in height. The tank construction includes two curved internal baffles and heads of 3/16" ASTM A36 mild steel with 100% welded seams, a 25-inch round manway, rear-mount ladder with anti-slip rungs, and a full-length 3/16" belly plate with 100% full penetration welds. The system includes a 4x3 M3ZRMS cast iron water pump delivering 75 gallons per minute at 65 PSI with hydraulic drive, two AV1100 air-to-close spray valves for rear discharge with adjustable fan nozzles, two side spray valves with duckbill nozzles, a control console for independent valve operation, 100 feet of airline, a 1.5-inch brass ball valve for manual discharge, and a pre-plumbed rear deck assembly. Additional features include standard DOT LED lights, sight gauges with clear flexible PVC tubing on front and rear, a hydraulic reservoir on the rear deck, SCH40 and SCH80 piping throughout, vulcanized rubber wear pads, sandblasted and primed exterior finish with metallic gray paint, and a five-year limited tank warranty with one-year limited plumbing warranty.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 002 Salient Characteristics.pdf | ||
| 1240BE26Q0119 Amendment 002.pdf | ||
| Amendment 002 Part 12 Combined Synopsis_Solicitation_1240BE26Q0119 TL EDITs (1).pdf | ||
| 1240BE26Q0119 Amendment 001.pdf | ||
| 1240BE26Q0119 - Salient Characteristics.docx | DOCX document | |
| 1240BE26Q0119- SOO.docx | DOCX document | |
| Part 12 Combined Synopsis_Solicitation_1240BE26Q0119.pdf | ||
| 1240BE26Q0119 -Picture 003.jpg | JPG image | |
| 1240BE26Q0119 -Picture 004.jpg | JPG image | |
| 1240BE26Q0119 -Picture 002.jpg | JPG image | |
| 1240BE26Q0119 -Picture 005.jpg | JPG image | |
| 1240BE26Q0119 -Picture 001.jpg | JPG image |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics Switch Truck Water Tanks-Quick Change
· TANK: 4000 Gallon 6V-15 Vision Tank, Modified Trapezoid
· TANK DIMENSIONS: Tank Model: 6V-15; Length: 15 Feet; Width: 102 Inches; Height: 66 Inches
· TANK BAFFLES: (2) Baffles Curved and Fitted, Welded Inside and Out 100%, 3/16" ASTM A36 Mild Steel
· TANK HEADS: Curved and Fitted, Welded Inside and Out 100%, 3/16" ASTM A36 Mild Steel
· TANK LADDER: Rear Mount Ladder with Anti-Slip Rungs
· TANK FENDERS: 12 Gauge Steel Welded to Tank
· TANK MANWAY: 25" Round Manway Center of Tank, Hinged Non-Sealing Lid
· TANK BELLYPLATE: 3/16" ASTM A36 Full-Length of Tank 60" Width; 100% Full Penetration Welds; All Tanks 3,000 Gallons Plus
· TANK SUBFRAME: Heavy Duty 1/4" U-Shaped Cradle Runners Full Length of Tank
· TANK HYD FILL: 2-1/2" SCH40 Black Pipe P/S Rear Tank, Swinging Spout to Manway with Airgap, Male Camloc
· TANK MOUNTING: Solid Heavy-Duty Angle 6-Point Mounting Brackets, Front Tank Guides, 3/4" Grade 8 Hardware, Front Springs
· Removable Stands for Removal and Storage
· TANK SKIRTBOARD: Vulcanized Rubber Wear Pads
· EXTERIOR FINISH: Sandblasted and Primed
· PAINT: Metallic Gray – Paint Code# 917120
· LIGHTS: Standard DOT LED Lights with Universal Adapter Harness
· SIGHT GAUGE: 5/8" Clear Flexible PVC Tubing with Brass Hardware, Front and Rear D/S
· WATER PUMP: 4x3 M3ZRMS Cast Iron with Mechanical Seal
· 75 Gallons per minute @ 65 PSI
· PUMP DRIVE: Hydraulic Drive 31 Series with Hydraulic Lines Run Through Tank
· HYDRAULIC LINES: SCH80 Pipe, Low Pressure and High-Pressure Lines Through Tank
· HYDRAULIC TANK: Hydraulic Reservoir Mounted Rear Deck
· REAR SPRAY: (2) AV1100 Air-to-Close Spray Valves with BC2399 Adjustable Fan Nozzles
· SIDE SPRAY: (2) AV1100 Air-to-Close Spray Valve with BC2179 Duckbill Side Nozzle on 90-Degree Elbow
· CONTROL CONSOLE: Control Console to Independently Operate Each Spray Valve
· AIRLINE: 100' of 1/4" Airline Supplied Loose
· JET VALVE: 1-1/2" Brass Ball Valve Off Manifold on Drive Side for Manual Discharge
· PLUMBING: SCH40 Black Pipe with Groove Style Couplings/Fittings
· REAR DECK: Pre-Plumbed Drop on Tank Kit. Rear Sprays, Water Pump & Hydraulic Motor are Pre-Plumbed onto Tank.
· TANK WARRANTY: Standard 5-Year Limited Tank Construction Warranty
· PLUMBING WARRANTY: Standard 1-Year Limited Plumbing Warranty
· DUMP VALVE: Rear of Tank
· DRAFTING CAPABILITIES
· GRAVITY BAR
· NORMAL TANK: Classic Tank Design
QUICK-CHANGE CONFIGURATION
The completed water tender system shall be configured so that one experienced operator can change the truck configuration between the water tender, dump bed, and fifth-wheel configuration, or reverse the process, using minimal tools and completing the change in 30 minutes or less.
The contractor shall demonstrate this capability during Government inspection and acceptance.
File details come from the government source that posted it. Updated .