Amendment_01_(Final).pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 4

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

01 2-26-2018 848465

6. ISSUED BY 7. ADMINISTRATED BY (If other than Item 6)

USDA Forest Service Mt. Baker-Snoqualmie National Forest Attn: Brian A. Johnson, CO 2930 Wetmore Ave., Suite 3A Everett, WA 98201

Same as Block 6

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NO.

1205G118R0011

9B. DATED (SEE ITEM 11)

1-29-2018

10A. MODIFICATION OF CONTRACT/ORDER NO.

*TO BE COMPLETED BY VENDOR IF NOT COMPLETE 10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended is not extended.

NOTE: If offers are handcarried, additional time should be allowed to access the depository facility due to heightened security requirements.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Item 8 and 15, and returning 1 copies of the amendment; (b) acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hours and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required) N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS, IT MODIFIES THE CONTRACT/ORDER NO.

AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT/ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return Zero (0) copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

1. The purpose of Amendment 01 is provided on the following pages. The pre-bid meeting attendee sign-in sheet is on page 4 of 4 of this Amendment. The RFP closing date is extended as provided herein.

(Continued…)

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Brian A. Johnson 15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign)

BY

(Signature of Contracting Officer) 2-26-2018

RFP No. 1205G118R0011, Amendment 01 Building #2002 Colville SO, Entrance Security Page 1 of 4

2. The purpose of Amendment 01 is to correct and clarify portions of the contract work. USDA is currently running OnGuard 7.2 vice 7.0 software; therefore, the installation and system shall utilize the new compatible LNL-4420 panels.

3. The summary of changes includes:

A. Use the newest software version 7.2 vice the specified 7.0.

B. Use the newest compatible panels, LNL-4410, to go with the updated software.

C. The contractor shall provide the one client license for each client work station.

D. Specification 2.13 badge printer: The specified printer is not discontinued and shall stay as specified.

E. Enclosures are not critical and others may work. Submittals for substitutions will be made after award.

F. The use of a 42” or 40” monitor for Option 2 (CCTV System) is acceptable.

G. The specification for the CCTV monitor is attached to this Amendment.

H. 2.24 COLOR INKJET PRINTER: Most any color inkjet printer will work.

I. 2.25 USB EXTENDERS: The max distance for USB extension should be no greater than

100’.

J. Door #10 is an existing metal door and not a wood door.

K. Access into no drop ceiling can be through adjacent drop ceilings or by cutting an access way, but the access way will need to be returned to previous condition (re-sheetrock and finished to match existing).

L. Only one (1) Ethernet connection to the Enterprise Physical Access Control System (ePACS) from our national network is required vice two (2). It was originally thought that with the button release that two would be needed, but it is not.

M. The Request for Proposal (RFP) closing date is hereby extended to April 4, 2018 @ 2:00 PM (Pacific).

N. Each offeror is required to sign and submit Amendment 01 with its RFP package on or before the revised closing date.

O. End of Amendment 01.

RFP No. 1205G118R0011, Amendment 01 Building #2002 Colville SO, Entrance Security Page 2 of 4 bajohnson03 Highlight

P404 P484 P554

LCD MODULE

Panel Technology SPVA SPVA S-IPS Viewable Image Size 40" 48" 55" Native Resolution 1920 x 1080 Brightness (Typical/Minimum) 550 cd/m2 / 700 cd/m2

Contrast Ratio (Typical) 4000:1 1300:1 Viewing Angle 178° Vert., 178° Hor. (89U/89D/89L/89R) @ CR>10 Aspect Ratio 16:9 Displayable Colors Over 1.07 Billion Orientation Landscape, Portrait, Face Up, Face Down Panel Haze (%) 25 44

CONNECTIVITY

Input Terminals

Digital HDMI 2.0 x2 (with HDCP), DVI-D (with HDCP), DisplayPort x2 (with HDCP) Analog VGA 15-pin D-SUB, RCA Composite Audio 3.5mm Audio Mini Jack x2, DisplayPort Audio x2, HDMI Audio x3 External Control LAN (100Mbit), 3.5 Mini Jack IR Remote, RS232C

Data microSD (Media Player), USB 2.0 (Media Player), USB 2.0 (Service), USB Type-B (Upstream), USB 2.0 x2 (Compute Module, Powered 5V/2A)

Output Terminals

Digital DisplayPort (Outputs DisplayPort) Audio 3.5mm Audio Mini Jack External Control LAN (100Mb)

POWER CONSUMPTION

On (Typ/Max) 92W/115W 115W/140W 125W/175W

Network Standby 3W

Normal Standby <0.5W

Current Rating 2.9A - 1.2A @ 100V - 240V 3.1A - 1.2A @ 100V - 240V 3.6A - 1.5A @ 100V - 240V

Speaker Rating Integrated 10W x 10W, Optional 15W x 3

PHYSICAL SPECIFICATIONS

Bezel Width (L/R, T/B) 13.2mm/13.2mm/ 13.2mm/13.2mm

13.2mm/13.2mm/ 13.2mm/13.2mm

14.2mm/14.2mm/ 14.2mm/14.2mm

Net Dimensions (Without stand; W x H x D)

36.1 x 20.9 x 2.2 in.

918.0 x 530.6 x 54.7mm

42.8 x 24.6 x 2.2 in.

1086.5 x 625.3 x 54.7mm

49.0 x 28.1 x 2.5 in.

1244.0 x 714.8 x 62.9mm

Net Weight (Without Stand) 31.5lbs / 14.3kg 38.8lbs / 17.6kg 54.2lbs / 24.6kg VESA Hole Configuration 4x M6 x 12mm (300 x 300)

SENSORS

Ambient Light Sensor Integrated and programmable

Human Sensor Optional through KT-RC2 Accessory

Temperature Sensor Integrated and programmable; linked to cooling fans

NFC Sensor Integrated; works in conjunction with free NEC Intelligent Wireless Data Application

ENVIRONMENTAL CONDITIONS

Operating Temperature 0 to 40C

Operating Humidity 20-80%

Operating Altitude 3000m (9843ft)

LIMITED WARRANTY 5 years Advanced Replacement

ADDITIONAL FEATURES

Ambient Light Sensor, AMX Support, Auto ID/Auto TileMatrix, Automated Email Alert Function, CEC Support through HDMI, Crestron Roomview Support, DICOM Simulation, Display Browser Control, Display Wall Calibrator Compatible, Factory Uniformity Correction, High Haze Panel, Image Flip, Intelligent Wireless

Data (NFC), Key Guide, Media Player through Browser Control/SD Card/USB, Multi Picture Mode, NaViSet Administrator 2 Compatible, OSD Rotation for Portrait Orientation, OPS Compatible, PJ Link Support, Point

Zoom Function, Power USB Port (5V/2A), Programmable LUT x3, Raspberry Pi Compute Module Compat-ible, Removeable Logo Ornament, Real Time Clock, SpectraView Engine Support, SNMP Support (with

Uniformity Control), 24-Hour Scheduler Function, UHD Support through HDMI/DisplayPort

SHIPS WITH 3m AC Power Cord, 1.8m DVI Cable, IR Remote Control, Batteries, CD-ROM (User Manual)

OPTIONAL ACCESSORIES

Table Top Stand (ST-401), Optional Speakers (SP-TF1), All OPS Option Cards, NEC Raspberry Pi Compute

Module (RP3CM16GB) with optional Compute Module Interface Board (DS1-IF10CE), Wall Mount (WMK- 3257), Slim Wall Mount (WMK-3255S), Human Sensor (KT-RC2)

Input Panels

1. DVI-D

2. HDMI IN2

3. DisplayPort IN2

4. DisplayPort IN1

5. DisplayPort OUT

6. VGA (RGB, YPbPr)

7. Audio IN1

8. Audio IN2

9. External Speaker Terminal

10. Internal/External Speaker Switch

11. Audio OUT

12. USB1

www.necdisplay.com Cat.No. 25.NEC.80.GL.UN.288 08.8.2017

Specifications (CCTV Monitor)

Options

OPS PC's

OPS-APIC-PS OPS-PCAEQ-PS

OPS-PCIB-PS OPS-APIS-PS

OPS-TCIS-PS

SDI

HD-SDI SB-01HC

3G-SDI SB-04HC

HDBaseT SB-07BC

Compute Module

Compute Module Interface Board DS1-IF10CE

NEC Raspberry Pi Compute Module RP3CM16GB

Tabletop Stand ST-401

Speaker SP-TF1

Dimensions

13. USB2

14. USB CM1 (2A)

15. USB CM2

16. LAN1

17. LAN2

18. VIDEO IN

19. USB MP

20. microSD

21. REMOTE IN

22. RS-232C

23. HDMI IN1

MultiSync, NaViSet and TileMatrix are trademarks or registered trademarks of NEC Display Solutions, Ltd. in Japan, the United States and other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries.

HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc.

AMX is a trademark or registered trademark of AMX in the United States and other countries.

VESA is a trademark of a nonprofit organization, Video Electronics Standard Association.

All other trademarks are the property of their respective owners. The images in this brochure are samples.

All specications are subject to change without notice.

©2017 NEC Display Solutions of America, Inc. and the NEC logo are registered trademarks of NEC.

1244.0 (P554)

1086.5 (P484)

918.0 (P404)

62.9 (P554)

54.7 (P484)

54.7 (P404)

.8

P

.3

P

.6

P

1211109 13 14 15 16 17 18 19 20 21 22 23

2 3 4 5 6 7 8

Bottom Panel

Side Panel

RFP No. 1205G118R0011, Amendment 01 Building #2002 Colville SO, Entrance Security Page 3 of 4

RFP No. 1205G118R0011, Amendment 01 Building #2002 Colville SO, Entrance Security Page 4 of 4