12-IFC DRAWING SET - Muntz Library Stair Renovation.pdf

PDF 18 MB Posted Mar 9, 2026

Attached to: Muntz Library Stair Renovation State and local contract opportunity
Solicitation number: RFP No. 750/25/26-006
Issued by: Sterling County, Texas

About this file

Written by GovTribe AI · Mar 10, 2026

This is a construction drawing set for the Muntz Library Stair Renovation project at the University of Texas at Tyler in Tyler, Texas. The project involves the complete renovation of an existing open stair system within the library, including replacement of handrail and guardrail systems with new glass rail assemblies (basis of design: Livers Bronze Struct-U-Rail), full replacement of tile finishes at all stair treads, risers, and curbs across multiple floor levels, preparation and installation of new resilient flooring with cover base in existing tile areas, and painting of walls, curbs, and stair undersides. The drawing set comprises architectural plans across four floor levels (1st through 4th floors), demolition plans indicating removal of existing glass, chrome tube and handrail systems, brick tile floors, aluminum curb caps, and related materials, and detailed cross-sections and elevations of the new railing and finish conditions. The scope includes full-height glass wall preservation, temporary floor-to-ceiling barriers during construction to minimize dust spread, and temporary safety railings for stair openings.

The project specifications reference compliance with 2021 International Building Code, 2021 International Plumbing Code, 2021 International Mechanical Code, 2021 International Fire Code, 2023 National Electrical Code, 2021 International Energy Conservation Code, and 2012 Texas Accessibility Standards. Materials specified include Daltile ceramic tile (Reminiscent Aged Beige), Interface Level Set resilient flooring, Tarkett-Johnsonite rubber base, Benjamin Moore paint finish, Schluter transition and stair nosing trim, and Laticrete grout. The drawing set indicates base bid and alternate pricing options for flooring replacement on the first floor only, second floor only, or third and fourth floors only. The drawings were issued for construction on February 6, 2026, with project management by Trey Greer and architectural services provided by FitzPatrick Architects of Tyler, Texas. The project involves coordination across multiple construction trades and requires contractor verification of existing conditions prior to bid submission and shop drawing preparation.

View the file

Other files for this state and local contract opportunity

Other files attached to Muntz Library Stair Renovation, newest first.
File	Type	Posted
9-Exhibit C - Sample Payment Bond.pdf	PDF	Mar 9, 2026
7-Exhibit G - Respondents Pricing and Delivery Proposal.docx	DOCX document	Mar 9, 2026
3-Compiled Specs - Muntz Library Stair Renovation.pdf	PDF	Mar 9, 2026
15-Library Stairs - RFP Agenda.pdf	PDF	Mar 9, 2026
2-Exhibit E - VetHUB Subcontracting Plan.docx	DOCX document	Mar 9, 2026
14-Pre-Submittal Conference Sign-In Sheet - Muntz Library Stairs.pdf	PDF	Mar 9, 2026
11-Exhibit A - Sample Agreement Between Owner and Contractor.doc	DOC document	Mar 9, 2026
6-Exhibit I - Uniform General Conditions.docx	DOCX document	Mar 9, 2026
8-Exhibit H - Owners Special Conditions.docx	DOCX document	Mar 9, 2026
1-Exhibit F - HSP Quick Checklist.pdf	PDF	Mar 9, 2026
4-RFP 750-25-26-006 Library Stairs Renovation.doc	DOC document	Mar 9, 2026
13-ADDENDUM NO 1 to RFP 750-25-26-006.pdf	PDF	Mar 9, 2026
10-Exhibit B - Sample Performance Bond.pdf	PDF	Mar 9, 2026
5-Exhibit D - Campus Map.pdf	PDF	Mar 9, 2026

Show all 14

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

UNIVERSITY OF TEXAS AT TYLER

MUNTZ LIBRARY STAIR RENOVATION

TYLER , TEXAS

Cover

1/19/23, 3:56 PMGoogle Maps

Page 1 of 2https://www.google.com/maps/@32.316683,-95.2462603,12z

OWNER

VICINITY MAP

UT TYLER

3900 UNIVERSITY BLVD.

TYLER, TEXAS 75799

CONTACT: DEMI BECKHAM

903-565-6407 dbeckham@uttyler.edu

CAMPUS MAP

INDEX OF DRAWINGS

TITLE SHEET

G001 INDEX/CONVENTIONS

D101 DEMOLITION PLANS

D102 DEMOLITION PLANS

D103 DEMOLITION PLANS

A101 FLOOR PLANS

A102 FLOOR PLANS

A103 FLOOR PLANS

A201 STAIR DETAILS

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

INDEX/

CONVENTIONS

G001

GC GENERAL CONTRACTOR

GEN GENERAL

GFI GROUND FAULT INTERRUPTER

GLU-LAM GLUE LAMINATED BEAM

GYP GYPSUM

HB HOSE BIB

HM HOLLOW METAL

HORIZ HORIZONTAL

HR HANDRAIL

HS HANDICAP SIGN

HT HEIGHT

HVAC HEATING, VENTILATING, AND

AIR CONDITIONING

ID INSIDE DIAMETER

INSUL INSULATION

INT INTERIOR

JT JOINT

KS KNEE SPACE

LAM LAMINAT(E) (ED)

LAV LAVATORY

LBS POUNDS

LLH LONG LEG HORIZONTAL

LLV LONG LEG VERTICAL

LONC LIMITS OF NEW CONSTRUCTION

LTG LIGHTING

MATL MATERIAL

MAX MAXIMUM

MB MARKER BOARD

MECH MECHANICAL(LY)

MFG MANUFACTURER

MIN MINIMUM

MISC MISCELLANEOUS

MO MASONRY OPENING

MTL METAL

N NORTH

N/A NOT APPLICABLE

NIC NOT IN CONTRACT

NO NUMBER

NOM NOMINAL

NRC NOISE REDUCTION COEFFICIENT

NTS NOT TO SCALE

OA OVERALL

OC ON CENTER

OD OUTSIDE DIAMETER/DIMENSION

OFCI OWNER FURNISHED/

CONTRACTOR INSTALLED

OFD OVERFLOW DRAIN

OFOI OWNER FURNISHED/

OWNER INSTALLED

OH OVERHEAD

OL OCCUPANT LOAD

OPP OPPOSITE

OS OVERFLOW SCUPPER

PB PARKING BUMPER

PE TILT PANEL END

PERM PERMANENT(LY)

A/E ARCHITECT/ENGINEER

ACT ACOUSTIC CEILING TILE

ADJ ADJUSTABLE

AFF ABOVE FINISH FLOOR

ALT ALTERNATE

AOR AREA OF REFUGE

APPROX APPROXIMATE(LY)

ARCH ARCHITECT(URAL)

AV AUDIO VISUAL

BD BOARD

BLDG BUILDING

BLKG BLOCKING

BOTT BOTTOM

BRG BEARING

BUR BUILT UP ROOF

CAB CABINET

CB CHALK BOARD

CJ CONTROL/CONSTRUCTION JOINT

CL CENTERLINE

CLG CEILING

CLO CLOSET

CLR CLEAR

CMU CONCRETE MASONRY UNIT

COL COLUMN

CONC CONCRETE

CONT CONTINUOUS

CT CERAMIC TILE

DBL DOUBLE

DEG DEGREE

DEMO DEMOLITION

DF DRINKING FOUNTAIN

DIA DIAMETER

DIAG DIAGONAL

DIM DIMENSION

DIST DISTANCE

DWG DRAWING

EA EACH

EIFS EXTERIOR INSULATION

FINISH SYSTEM

EJ EXPANSION JOINT

EL ELEVATION

ELEC ELECTRIC

EPS EXPANDED POLYSTERENE

EQ EQUAL

EQUIP EQUIPMENT

EWC ELECTRIC WATER COLOR

EX EXAMPLE

EXIST EXISTING

EXP EXPAN(D) (SION)

EXT EXTERIORF

FA FIRE ALARM

FE FIRE EXTINGUISHER

FD FLOOR DRAIN

FF FINISH FLOOR

FFE FINISH FLOOR ELEVATION

FIN FINISH

FLR FLOOR(ING)

FT FEET

FTG FOOTING

GA GAUGE

GAL GALLON

GALV GALVANIZED

GB GRAB BAR

PJ TILT PANEL JOINT

PL PLATE

PLAM PLASTIC LAMINATE

PLYWD PLYWOOD

PP POWER POLE

PR PAIR

PROJ PROJECT(ION) (OR)

PROP PROPERTY

PS PROJECTOR SCREEN

PSF POUNDS PER SQUARE FOOT

PSI POUNDS PER SQUARE INCH

PTD PAINTED

QTY QUANTITY

R RADIUS RADII

RA RETURN AIR

RCP REFLECTED CEILING PLAN

RD ROOF DRAIN

RE REFER(ENCE)

REG REGISTER

REINF REINFORC(E) (ED) (ING) (EMENT)

REQD REQUIRED

REV REVISE(D)

RM ROOM

RO ROUGH OPENING

SCH SCHEDULE

SF SQUARE FOOT

SIM SIMILAR

SOG SLAB ON GRADE

SPEC(S) SPECIFICATION(S)

SQ SQUARE

SS STAINLESS STEEL

STC SOUND TRANSMISSION CLASS

STD STANDARD

STL STEEL

STO STORAGE

STRUCT STRUCTURAL

SUSP SUSPENDED

T THERMOSTAT

T&G TONGUE AND GROOVE

TAS TEXAS ACCESSIBILITY STANDARDS

TB TACK BOARD

TEL TELEPHONE

TEMP TEMPORARY

THK THICK

TOP TOP OF PLATE

TV TELEVISION

TYP TYPICAL

UC UNDERCABINET

UG UNDERGROUND

UNO UNLESS NOTED OTHERWISE

VCT VINYL COMPOSITION TILE

VERT VERTICAL

VWC VINYL WALL COVERING

W/ WITH

W/O WITHOUT

WC WATER CLOSET

WD WOOD

WH WATER HEATER

WP WATER PROOF

WT WEIGHT

WWF WELDED WIRE FABRIC

SHEET NUMBER

DRAWINGS ARE NUMBERED BY LOCATION WITHIN GRID AS

DETERMINED BY THE LEFT HAND CORNER OF THE DRAWING

G001 A

2 4 61 3 5

C4C1 C3 C5 C6

E1 E3 E5

D2 D6

B1 B2 B3 B4 B5 B6

A1 A2 A3 A4 A5 A6

E2 E4 E6

D1 D3 D5

PROJECT GENERAL NOTES

THE FOLLOWING PROJECT GENERAL NOTES APPLY TO THE

ENTIRE SET OF DRAWINGS AND ARE NOT SPECIFIC TO ANY

ONE DISCIPLINE, UNLESS OTHERWISE NOTED:

1. THE CONSTRUCTION DOCUMENTS (DRAWINGS AND

SPECIFICATIONS) ARE COMPLEMENTARY AND ESTABLISH

DETAILED MINIMUM REQUIREMENTS FOR THE DESIGN AND

CONSTRUCTION OF THE PROJECT.

2. THIS SET OF DRAWINGS, WHEN COMPLETE, CONSISTS OF ALL

DRAWINGS LISTED BY THE INDEX OF DRAWINGS. THE WORK

DESCRIBED BY THE DRAWINGS OF ANY ONE DISCIPLINE MAY

BE AFFECTED BY THE WORK DESCRIBED ON DRAWINGS OF

ANOTHER DISCIPLINE AND MAY REQUIRE REFERENCE TO

DRAWINGS OF ANOTHER DISCIPLINE.

PARTIAL SETS OF DRAWINGS ARE INCOMPLETE. DO NOT

DISTRIBUTE OR UTILIZE PARTIAL SETS OF DRAWINGS.

3. COLUMN GRID LINES IDENTIFIED BY A LETTER DESIGNATION

ARE PARALLEL, UNLESS OTHERWISE NOTED. COLUMN GRID

LINES IDENTIFIED BY A NUMBER DESIGNATION ARE PARALLEL

AND ARE PERPENDICULAR TO THOSE WITH LETTER

DESIGNATIONS, UNLESS OTHERWISE NOTED.

4. DISCIPLINE GENERAL NOTES, SYMBOLS AND DEFINITIONS

APPLICABLE TO EACH DISCIPLINE'S DRAWINGS MAY BE

FOUND AT THE FRONT OF EACH DISCIPLINE'S PORTION OF

THE SET OF DRAWINGS AND ARE LISTED AS PART OF THE

OVERALL PROJECT INDEX OF DRAWINGS.

5. THE 'ARCHITECTURAL' SERIES DRAWINGS TAKE PRECEDENCE

FOR THE FINISHED APPEARANCE AND LOCATION OF ALL

EXPOSED ELEMENTS OF THE WORK OF ALL TRADES,

INCLUDING THAT WORK WHICH IS ILLUSTRATED PRIMARILY

ON DRAWINGS OF OTHER DISCIPLINES.

6. THE DRAWINGS MAY MAKE REFERENCE TO AND/OR

ILLUSTRATE ITEMS WHICH ARE NOT PART OF THE WORK OF

THE CONTRACT. THESE "NOT IN CONTRACT" ITEMS AS

INDICATED ARE REFERENCED AND/OR ILLUSTRATED FOR THE

CONTRACTOR'S REFERENCE, INFORMATION AND

COORDINATION ONLY.

7. EXISTING CONDITIONS, IF SHOWN, ARE FROM AVAILABLE

RECORD DRAWINGS AND OR VISUAL FIELD SURVEYS. THE

CONTRACTOR SHALL VERIFY ACTUAL EXISTING CONDITIONS

AT THE SITE PRIOR TO SUBMITTING A BID, AND NOTIFY THE

ARCHITECT OF ANY DISCREPANCIES.

8. ALL PARTS OF THE WORK, INCLUDING MATERIALS, METHODS,

ASSEMBLIES, ETC., MUST COMPLY WITH THE REQUIREMENTS

OF THE GOVERNING CODES AND REGULATIONS OF ALL

FEDERAL, STATE AND LOCAL AUTHORITIES HAVING

JURISDICTION OVER THE PROJECT, AS WELL AS THOSE

GREATER REQUIREMENTS INDICATED BY THE CONTRACT

DOCUMENTS. NO PART OF THE CONTRACT DOCUMENTS MAY

BE CONSTRUED TO REQUIRE OR PERMIT WORK CONTRARY

TO A GOVERNING CODE OR REGULATION.

9. THE CONTRACTOR SHALL ENDEAVOR TO IDENTIFY AND

NOTIFY THE ARCHITECT/ENGINEER OF CONFLICTS BETWEEN

THE WORK OF DIFFERENT PARTIES AT THE EARLIEST

POSSIBLE DATE SO AS TO ALLOW REASONABLE AND

ADEQUATE TIME FOR THE CONFLICT TO BE RESOLVED

WITHOUT DELAYING THE WORK. ALL DEVIATIONS FROM THAT

WHICH IS REQUIRED BY THE CONTRACT DOCUMENTS MUST

BE APPROVED IN ADVANCE BY THE ARCHITECT/ENGINEER

AND OWNER.

10. IT IS THE CONTRACTORS RESPONSIBILITY TO REVIEW AND

COORDINATE THE WORK OF ALL SUB-CONTRACTORS, TRADES

AND SUPPLIERS WITH THE REQUIREMENTS OF THE

CONTRACT BEFORE COMMENCING CONSTRUCTION, AND TO

ASSURE THAT ALL PARTIES ARE AWARE OF ALL

REQUIREMENTS, REGARDLESS OF WHERE THE

REQUIREMENTS OCCUR IN THE CONTRACT DOCUMENTS,

WHICH MIGHT AFFECT THE WORK OF THAT PARTY.

ROOM NAME

E101

F1B

HI LO

#DrgID

#DrgIDAXXX

AXXX

XX AX

AXXX

#DrgID

#DrgIDAXXX

AXXX

11"1'-6" 15'-43/4" ±

BASE CABINET

UPPER CABINET

FLOOR DRAIN W/ SLOPED FLOOR

ELEMENT THAT OCCURS

ABOVE THE PLAN CUT

TYP DIM STRING (TO STUDS) - ±

INDICATES DIM THAT CAN ADJUST FOR

FIELD CONDITIONS

ELEV NUMBER

SHEET NUMBER

ELEV NUMBER

SHEET NUMBER

SECT NUMBER

SHEET NUMBER

DET NUMBER

SHEET NUMBER

DET NUMBER

SHEET NUMBER

C03

NEW WALL W/ INSUL

EXISTING WALL

EXISTING WALL TO DEMO

EXISTING STRUCTURAL GRID LINE

GENERAL OR DEMO NOTE

NEW STRUCTURAL GRID LINE

PARTITION TYP

EXISTING WINDOW TO DEMO

NEW WINDOW & WINDOW NUMBER

EXISTING WINDOW & WINDOW NUMBER

NEW DOOR & NUMBER

EXISTING DOOR & NUMBER

EXISTING DOOR TO DEMO

SHEET REVISION NUMBER

ROOM NAME & NUMBER

REVISION BUBBLE

NORTH ARROW

EXTERIOR ELEVATION

FIRE EXTINGUISHER & CABINET OR FIRE VALVE CABINET -

SEE SPECIFICATIONS FOR TYPES & PLAN DESIGNATIONS

INTERIOR ELEVATION

WALL/BUILDING SECTION

DETAIL MARK

DETAIL MARK/ENLARGED PLAN

NEW WALL

ACCESSIBLE PLUMBING FIXTURE

NON-ACCESSIBLE PLUMBING FIXTURE

SHEET INDEX

Subset ID D1

D101 D102 D103

A101 A102 A103

A201

DEMOLITION PLANS

FLOOR PLANS

STAIR & RAIL DETAILS

D5 ARCHITECTURAL ABBREVIATIONS

G001

A4 SHEET DIAGRAM

G001 SCALE: 1/4" = 1'-0"

A5 ARCHITECTURAL SYMBOL LEGEND

G001 0 2' 4' 8'

APPLICABLE BUILDING CODES:

2021 INTERNATIONAL BUILDING CODE

2021 INTERNATIONAL PLUMBING CODE

2021 INTERNATIONAL MECHANICAL CODE

2021 INTERNATIONAL FIRE CODE

2023 NATIONAL ELECTRICAL CODE

2021 INTERNATIONAL ENERGY CONSERVATION

CODE

2021 INTERNATIONAL EXISTING BUILDING CODE

2021 NFPA 101

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

DEMOLITION

PLANS

D101

D5 D101

REMOVE EXISTING GLASS, CHROME

TUBE & HANDRAIL SYSTEM

REMOVE EXISTING FLOORING & BASE BELOW

STAIR & EXISTING MUD BED @ RECESSED SLAB

EXISTING FLOORING &

BASE TO REMAIN

REMOVE EXISTING FLOORING & BASE &

EXISTING MUD BED @ RECESSED SLAB

REMOVE EXISTING FLOORING & BASE & EXISTING

MUD BED @ 1 1/2" DEEP RECESSED SLAB

REMOVE EXISTING GLASS, CHROME

TUBE & HANDRAIL SYSTEM

REMOVE BRICK TILE FLOORS @STAIR AREAS

REMOVE EXISTING FLOORING & BASE BELOW

STAIR LANDING - PREPARE FOR NEW FLOORING

REMOVE EXISTING FLOORING & BASE &

EXISTING MUD BED @ RECESSED SLAB

REMOVE EXISTING FLOORING & BASE & EXISTING

MUD BED @ 1 1/2" DEEP RECESSED SLAB

PROVIDE PROTECTION

FOR EXISTING CARPET

PAINT UNDERSIDE OF STAIR PT01

BASE BID: NO WORK

ALTERNATE 1: REMOVE EXISTING FLOORING

& BASE AND PREP FOR NEW FLOOR TILE

EXISTING FLOORING &

BASE TO REMAIN

PROVIDE PROTECTION

FOR EXISTING CARPET

EXISTING FLOORING TO

REMAIN

11/2" 21/2" 11/4"

C U

R B

H T.

- 5 " T

Y P.

REMOVE EXISTING TEMPERED GLASS STAIR

RAILS TYP. FULL HEIGHT GLASS WALLS

@ EA. FLOOR TO REMAIN

REMOVE ALUMINUM CAP TRIM @ STAIR RUNS

REMOVE BRICK PAVER TILE AT TREADS, RISERS, & CURBS

REMOVE 5/8" GYP. BD. & 7/8" CHANNELS AS REQ'D

FOR NEW WORK.

REMOVE EXISTING MORTAR BED AND PREPARE AS REQUIRED FOR

NEW TILE

EXISTING STEEL CURB FRAME @ EVERY 3RD STEP TO

REMAIN

REMOVE EXISTING CHROME PIPE HANDRAILS TYP.

DEMO

R M

SCALE: 1/4" = 1'-0"

A1 1ST FLOOR DEMOLITION PLAN

D101 0 2' 4' 8'

SCALE: 1 1/2"= 1'-0"

D5 EXISTING GLASS HANDRAIL DEMOLITION SECTION

D101 0 6'' 12'' 18''

DEMOLITION NOTES

1. REMOVE TILE @ TREADS, RISERS, & CURBS ON ENTIRE STAIR SYSTEM ON ALL LEVELS.

2. REMOVE ALL ALUMINUM ANODIZED METAL CURB CAPS AT

STAIR CURBS.

3. REMOVE ENTIRE EXISTING GLASS HANDRAIL SYSTEM & MOUNTING RAIL ON ALL LEVELS.

4. REMOVE ALL CHROME FINISH RAILS & NEWEL POSTS.

5. REMOVE OTHER MATERIALS & ELEMENTS AS REQUIRED FOR NEW WORK SHOWN.

6. CONSTRUCT TEMPORARY FLOOR TO CEILING BARRIERS AS NEEDED TO MINIMIZE SPREAD OF DUST AND

NOISE DURING DEMO AND CONSTRUCTION

7. PROVIDE TEMPORARY SAFETY RAILINGS TO ENSURE STAIR OPENINGS ARE GUARDED AGAINST PUBLIC

ENTRY

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

DEMOLITION

PLANS

D102

ELEV

D5 D101

D5 D101 C5

A201

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

REMOVE METAL CURB CAP

@ ALL STAIR RUNS TYPICAL.

EXISTING FULL HEIGHT

GLASS WALLS & CURB TO REMAIN

FULL HEIGHT GLASS WALLS & CURB TO REMAIN

REMOVE BRICK TILE FLOORS @

STAIR AREAS

REMOVE EXISTING FLOORING & BASE & EXISTING

MUD BED @ 1 1/2" DEEP RECESSED SLAB

REMOVE EXISTING FLOORING & BASE & EXISTING

MUD BED @ 1 1/2" DEEP RECESSED SLAB

REMOVE EXISTING FLOORING & BASE & EXISTING

MUD BED @ 1 1/2" DEEP RECESSED SLAB

EXISTING FLOORING &

BASE TO REMAIN

EXISTING FLOORING &

BASE TO REMAIN

EXISTING FLOORING &

BASE TO REMAIN

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

REMOVE BRICK TILE FLOORS

@ STAIR AREAS

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

FULL HEIGHT GLASS WALLS & CURB TO REMAIN

REMOVE MODULAR FURNITURE TO

DEMO FLOORING BENEATH

CLEAN WAX FROM EXISTING BRICK WALLS

PAINT UNDERSIDE OF STAIR PT01

1ST FLOOR

BELOW

TO 3RD

FLOOR

EXISTING FLOORING TO

REMAIN

EXISTING FLOORING TO

REMAIN

C5 A201

SCALE: 1/4" = 1'-0"

A1 2ND FLOOR DEMOLITION PLAN

D102 0 2' 4' 8'

VIEW 3 VIEW 4

DEMOLITION NOTES

1. REMOVE TILE @ TREADS, RISERS, & CURBS ON ENTIRE STAIR SYSTEM ON ALL LEVELS.

2. REMOVE ALL ALUMINUM ANODIZED METAL CURB CAPS AT

STAIR CURBS.

3. REMOVE ENTIRE EXISTING GLASS HANDRAIL SYSTEM & MOUNTING RAIL ON ALL LEVELS.

4. REMOVE ALL CHROME FINISH RAILS & NEWEL POSTS.

5. REMOVE OTHER MATERIALS & ELEMENTS AS REQUIRED FOR NEW WORK SHOWN.

6. CONSTRUCT TEMPORARY FLOOR TO CEILING BARRIERS AS NEEDED TO MINIMIZE SPREAD OF DUST AND

NOISE DURING DEMO & CONSTRUCTION.

7. PROVIDE TEMPORARY SAFETY RAILINGS TO ENSURE STAIR OPENINGS ARE GUARDED AGAINST PUBLIC

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

DEMOLITION

PLANS

D103

ELEV

CURB @ 3RD

FLOOR BELOW

REMOVE EXISTING FLOORING & BASE &

EXISTING MUD BED @ 1 1/2" DEEP

RECESSED SLAB

REMOVE EXISTING

FLOORING & BASE

PREP FOR NEW

FLOORING & BASE

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

REMOVE BRICK TILE FLOORS @

STAIR AREAS

REMOVE EXISTING FLOORING & BASE

& EXISTING MUD BED @ RECESSED

SLAB

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

REMOVE EXISTING FLOORING & BASE &

EXISTING MUD BED @ RECESSED SLAB

EXISTING WALLS

REMOVE EXISTING FLOORING &

BASE & EXISTING MUD BED @

RECESSED SLAB

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

3rd FLOOR

BELOW

REMOVE GUARDRAIL & CURB CAP TYP.

REMOVE CHROME TUBE & GLASS GUARDRAIL

SYSTEM & CURB

4TH FLOOR

DOWN TO 3RD

FLOOR

BELOW

D5 D101

ELEV

REMOVE EXISTING CHROME

HANDRAILS & NEWELS AT

ALL FLOORS & LANDINGS

REMOVE EXISTING FLOORING AND

PREP FOR NEW FLOORING

REMOVE EXISTING FLOORING & BASE &

EXISTING MUD BED @ 1 1/2" DEEP

RECESSED SLAB

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

REMOVE CHROME TUBE & GLASS

HANDRAIL SYSTEM

REMOVE BRICK TILE FLOORS @ STAIR

AREAS

REMOVE CHROME TUBE & GLASS

GUARDRAIL SYSTEM & CURB

PAINT UNDERSIDE OF STAIR PT01

UP TO 4TH

FLOOR ABOVE

DOWN TO 2ND

FLOOR

BELOW

3RD FLOOREX

D5 D101

REMOVE BRONZE METAL CURB

CAP @ ALL FLOORS TYPICAL.

N N

SCALE: 1/4" = 1'-0"

A3 4TH FLOOR DEMOLITION PLAN

D103 0 2' 4' 8'

SCALE: 1/4" = 1'-0"

A1 3RD FLOOR DEMOLITION PLAN

D103 0 2' 4' 8'

DEMOLITION NOTES

1. REMOVE TILE @ TREADS, RISERS, & CURBS ON ENTIRE STAIR SYSTEM ON ALL LEVELS.

2. REMOVE ALL ALUMINUM ANODIZED METAL CURB CAPS AT

STAIR CURBS.

3. REMOVE ENTIRE EXISTING GLASS HANDRAIL SYSTEM & MOUNTING RAIL ON ALL LEVELS.

4. REMOVE ALL CHROME FINISH RAILS & NEWEL POSTS.

5. REMOVE OTHER MATERIALS & ELEMENTS AS REQUIRED FOR NEW WORK SHOWN.

6. CONSTRUCT TEMPORARY FLOOR TO CEILING BARRIERS AS NEEDED TO MINIMIZE SPREAD OF DUST AND

NOISE DURING DEMO & CONSTRUCTION.

7. PROVIDE TEMPORARY SAFETY RAILINGS TO ENSURE STAIR OPENINGS ARE GUARDED AGAINST PUBLIC

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

FLOOR PLANS

A101

C5 A201

CONTINUE FLOOR FINISH PATTERN UNDER STAIR & LANDING

PT01 PT01

PT01 PT

NEW GLASS

GUARDRAIL/HANDRAIL

SYSTEM

NEW GLASS GUARDRAIL/

HANDRAIL SYSTEM

CT02

TERMINATE VERTICAL CURB

FACE TO FLOOR

INSTALL NEW MUD BED IN EXISTING

SLAB RECESS TO BE FLUSH W/

ADJACENT SLAB SURFACE

PAINT UNDERSIDE OF STAIR PT01

PT01

CT02

CT01

F: RF01

B: RB01

RB01

CP01

C5 A201

NEW GLASS

GUARDRAIL/

HANDRAIL SYSTEM

BASE BID: NO WORK

ALTERNATE 1: REPLACE EXISTING

FLOOR WITH CT01 & BASE WITH CT02.

MARK MANUFACTURER STYLE COLOR SIZE/SPECS REMARKS

CP01 MILLIKEN OBEX CUTX/FIZZ 133 TAUPE 50CM x 50CM, MONOLITHIC INSTALLATIONWALKOFF CARPET

RF01 INTERFACE LEVEL SET NATURAL WOODGRAINS WASHED MAPLE 4.5MM, ASHLAR INSTALLATION MAIN FLOOR BASE BID

CT01 DALTILE REMINISCENT AGED BEIGE 12" x 24" STAIR TILE, FLOOR TILE AT ALTERNATES

CT02 DALTILE REMINISCENT AGED BEIGE 3" x 12" TILE BASE

RB01 TARKETT-JOHNSONITE DURACOVE THERMOPLASTIC RUBBER BASE GREY HAZE 4"

BASE USED AT ALL AREAS WHERE NEW FLOORING (LVT

OR CARPET) TOUCHES WALLS

PT01 BENJAMIN MOORE EGGSHELL OC-22 CALM 2111-70

T01 SCHLUTER RENO - U, SCHIENE SATIN ANODIZED

METAL TRANSITION STRIP BETWEEN FLOORING CHANGES

WITH HEIGHT DIFFERENCES

T02 SCHLUTER TREP-E SATIN ANODIZED METAL STAIR NOSING AT ALL NEW TILE STAIRS

SF01 LATICRETE SPECTRALOCK PRO PREMIUM GROUT 27 HEMP GROUT AT TILE

SPECIAL FINISH

TRANSITION STRIP

PAINT

LEGEND

CARPET

CERAMIC TILE

RUBBER BASE

RESILIENT FLOORING

SCALE: 1/4" = 1'-0"

A1 1ST FLOOR PLAN

A101 0 2' 4' 8'

GENERAL NOTES:

SCOPE OF PROJECT:

THE PROJECT (BASE BID) INCLUDES NEW TURNKEY STAIR HANDRAIL & GUARDRAIL REPLACEMENT WITH GLASS RAIL SYSTEM (BASIS OF

DESIGN, LIVERS BRONZE STRUCT-U-RAIL).

BASE BID ALSO INCLUDES FULL REPLACEMENT OF TILE FINISH AT ALL LEVELS OF STAIR RUNS & INTERMEDIATE (MID-LEVEL) LANDINGS, INCLUDING TREADS, RISERS, & SIDE CURBS, PREPARATION OF FLOOR SLAB & INSTALLATION OF NEW LVT & COVER BASE THROUGHOUT EXISTING TILE AREAS OF EACH FLOOR LEVEL; PAINTING OF WALLS, CURBS, AND UNDERSIDE OF STAIR.

ALTERNATES INCLUDE CERAMIC TILE FLOORING IN VARIOUS AREAS - SEE DRAWINGS

1. NOT ALL RAILING CONDITIONS ARE SHOWN IN DETAIL. CONTRACTOR TO LAY OUT & DETAIL FULL SET OF NEW RAIL CONDITIONS, ELEMENTS, & DETAILS FOR SHOP DRAWING REVIEW & APPROVAL.

2. LAYOUT & DIMENSIONS ARE APPROXIMATELY SHOWN BASED ON EXISTING DRAWINGS AND FIELD OBSERVATIONS. CONTRACTOR SHALL

FIELD VERIFY ALL DIMENSIONS PRIOR TO SHOP DRAWING PREPARATION.

3. PREPARE FLOOR SLAB TO RECEIVE NEW FLOORING. INCLUDE FLOATING AS NEEDED. ALL RECESSED SLAB AREAS TO RECEIVE NEW MUD

BED TO MATCH ELEVATION OF ADJACENT SLAB.

4. INSTALL ALL FLOOR FINISH MATERIALS TIGHT TO DRYWALL AND MILLWORK

5. NEW TILE LAYOUT SHALL BE CENTERED.

6. ALL VERTICAL SURFACES WITHIN STAIR SHAFT & UNDERSIDE OF ALL STAIR RUNS TO BE PAINTED PT01.

7. ALL TILE GROUT JOINTS TO BE 1/16" OR SMALLEST GROUT LINE RECOMMENDED BY TILE MANUFACTURER TYP. CONFIRM GROUT LINE

DIMENSIONS FOR ALL TILE WITH ARCH. PRIOR TO INSTALL.

BASE BID FLOORING SCOPE:

ALL FLOORING AND BASE AS SHOWN ON THIS DRAWING

ALTERNATE 1: ALTERNATE 2: ALTERNATE 3:

FIRST FLOOR ONLY SECOND FLOOR ONLY THIRD & FOURTH FLOORS ONLY

FLOOR: CT01 FLOOR: CT01 FLOOR: CT01

BASE: CT02 BASE: CT02 BASE: CT02

-FINISHES @ STAIRS/TREADS/LANDINGS/BASE - NO CHANGE @ ALTERNATES

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

FLOOR PLANS

A102

ELEV

C5 A201

'-7

1/ 4"

'-0

28'-71/2"

EXISTING CURB & FULL HT. GLASS WALL

TO REMAIN AT THIS LOCATION: PROTECT AS REQ'D

NEW GLASS GUARDRAIL/HANDRAIL SYSTEM

EXISTING SOLID WALLS TO REMAIN TYP.

REFINISH ALL ADJACENT WALL FINISHES

TO MATCH AS PART OF STAIR RAIL

PROJECT SCOPE

RAILING SYSTEM

TERMINATES @

GLASS WALL

PT01

FULL HEIGHT GLASS PARTITIONS TO REMAIN

TYPICAL: PROTECT AS REQUIRED.

FULL HEIGHT GLASS PARTITIONS TO REMAIN

TYPICAL: PROTECT AS REQUIRED.

NEW GLASS GUARDRAIL/HANDRAIL SYSTEM

FULL HEIGHT GLASS PARTITIONS TO REMAIN

TYPICAL: PROTECT AS REQUIRED.

PT01

REMOVE MODULAR FURNITURE AND

CONTINUE NEW FLOORING TO MEET

EXISTING CARPET - MOVE FURNITURE

BACK TO ORIGINAL LOCATION @

COMPLETION OF PROJECT

INSTALL NEW MUD BED IN EXISTING

SLAB RECESS TO BE FLUSH W/

ADJACENT SLAB SURFACE

EXTENT OF MUD BEDCLEAN WAX FROM EXISTING BRICK WALLS

PAINT UNDERSIDE OF STAIR PT01

1ST FLOOR

BELOW

OPEN TO BELOW

TO 3RD

FLOOR

PT01

CT02

CT01

PT01

CT02

CT01

F: RF01F: RF01

F: RF01

B: RB01

RB01

CP01

C5 A201

SCALE: 1/4" = 1'-0"

A1 2ND FLOOR PLAN

A102 0 2' 4' 8'

GENERAL NOTES:

SCOPE OF PROJECT:

THE PROJECT (BASE BID) INCLUDES NEW TURNKEY STAIR HANDRAIL & GUARDRAIL REPLACEMENT WITH GLASS RAIL SYSTEM (BASIS OF

DESIGN, LIVERS BRONZE STRUCT-U-RAIL).

ALTERNATES INCLUDE CERAMIC TILE FLOORING IN VARIOUS AREAS - SEE DRAWINGS

1. NOT ALL RAILING CONDITIONS ARE SHOWN IN DETAIL. CONTRACTOR TO LAY OUT & DETAIL FULL SET OF NEW RAIL CONDITIONS, ELEMENTS, & DETAILS FOR SHOP DRAWING REVIEW & APPROVAL.

2. LAYOUT & DIMENSIONS ARE APPROXIMATELY SHOWN BASED ON EXISTING DRAWINGS AND FIELD OBSERVATIONS. CONTRACTOR SHALL

FIELD VERIFY ALL DIMENSIONS PRIOR TO SHOP DRAWING PREPARATION.

3. PREPARE FLOOR SLAB TO RECEIVE NEW FLOORING. INCLUDE FLOATING AS NEEDED. ALL RECESSED SLAB AREAS TO RECEIVE NEW MUD

BED TO MATCH ELEVATION OF ADJACENT SLAB.

4. INSTALL ALL FLOOR FINISH MATERIALS TIGHT TO DRYWALL AND MILLWORK

5. NEW TILE LAYOUT SHALL BE CENTERED.

6. ALL VERTICAL SURFACES WITHIN STAIR SHAFT & UNDERSIDE OF ALL STAIR RUNS TO BE PAINTED PT01.

7. ALL TILE GROUT JOINTS TO BE 1/16" OR SMALLEST GROUT LINE RECOMMENDED BY TILE MANUFACTURER TYP. CONFIRM GROUT LINE

DIMENSIONS FOR ALL TILE WITH ARCH. PRIOR TO INSTALL.

BASE BID FLOORING SCOPE:

ALL FLOORING AND BASE AS SHOWN ON THIS DRAWING

ALTERNATE 1: ALTERNATE 2: ALTERNATE 3:

FIRST FLOOR ONLY SECOND FLOOR ONLY THIRD & FOURTH FLOORS ONLY

FLOOR: CT01 FLOOR: CT01 FLOOR: CT01

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

FLOOR PLANS

A103

ELEV

'-5

1/ 2"

'-7

3/ 8"

33'-4"

16'-53/4"

5" VERTICAL

CURB FACE

15" X 15" GYP. BD.

COL. @ 3RD LEVEL

CURB RETURN

@ 3RD FLOORNEW HANDRAILS &

GUARDRAILS

TYPICAL

NEW GLASS GUARDRAIL/

HANDRAIL SYSTEM

MOUNT HANDRAIL TO WALL

WHERE IT EXTENDS BELOW

GLASS GUARDRAIL - PROVIDE

BLOCKING AS NECESSARY

NEW GLASS GUARDRAIL

SYSTEM AROUND STAIR

OPENING

NEW GLASS GUARDRAIL SYSTEM

AROUND STAIR OPENING

MOUNT HANDRAIL TO WALL

WHERE IT EXTENDS BELOW

GLASS GUARDRAIL - PROVIDE

BLOCKING AS NECESSARY

PT01

CT02

EXTENT OF MUD BED

INSTALL NEW MUD BED IN EXISTING

SLAB RECESS TO BE FLUSH W/

ADJACENT SLAB SURFACE

01 PT

EXISTING FLOORING TO REMAIN

PT01

PAINT UNDERSIDE OF STAIR PT01

UP TO 4TH

FLOOR ABOVE

DOWN TO 2ND

FLOOR

BELOW

3RD FLOOR STAIR & LOBBY PLAN

3RD FLOOR

F: CT01

F: RF01

SIM SIM

B: RB01

PT01

CT02

CT01

C5 A201

ELEV

2'-0" 16'-5" 2'-0"

32'-0"

30'-51/2"

6' -1

03/ 4"

'-3

5/ 8"

'-4

1/ 2"

CURB @ 3RD

FLOOR BELOW

NEW CURB & GUARDRAIL: PROVIDE GLASS GATE

OF A SIMILAR DESIGN AND LOOK AS THE "STRUCT-

U-RAIL", OUTFITTED WITH HEAVY DUTY HINGES,

HANDLE, AND KEYED LOCKING MECHANISM

NEW S.S.

GUARDRAIL

TYP.

NEW CURB & GLASS GUARDRAIL

SYSTEM TO FILL GAP

MOUNT HANDRAIL TO WALL

WHERE IT EXTENDS BELOW

GLASS GUARDRAIL - PROVIDE

BLOCKING AS NECESSARY

MOUNT HANDRAIL TO WALL

WHERE IT EXTENDS BELOW

GLASS GUARDRAIL - PROVIDE

BLOCKING AS NECESSARY

NEW

HANDRAIL

TYP.

NEW GLASS GUARDRAIL/

HANDRAIL SYSTEM

PT01

CT02

NEW GLASS GUARDRAIL

SYSTEM AROUND STAIR

OPENING

NEW GLASS GUARDRAIL SYSTEM AROUND STAIR OPENING

PT01

EXTENT OF MUD BED

INSTALL NEW MUD BED IN EXISTING

SLAB RECESS TO BE FLUSH W/

ADJACENT SLAB SURFACE

NEW GLASS GUARDRAIL

SYSTEM AROUND STAIR

OPENING

4TH FLOOR

DOWN TO 3RD

FLOOR

BELOW

PT01

CT02

CT01

F: RF01

SIM SIM

B: RB01

C5 A201

N N

SCALE: 1/4" = 1'-0"

A1 3RD FLOOR PLAN

A103 0 2' 4' 8'

SCALE: 1/4" = 1'-0"

A3 4TH FLOOR PLAN

A103 0 2' 4' 8'

GENERAL NOTES:

SCOPE OF PROJECT:

THE PROJECT (BASE BID) INCLUDES NEW TURNKEY STAIR HANDRAIL & GUARDRAIL REPLACEMENT WITH GLASS RAIL SYSTEM (BASIS OF

DESIGN, LIVERS BRONZE STRUCT-U-RAIL).

ALTERNATES INCLUDE CERAMIC TILE FLOORING IN VARIOUS AREAS - SEE DRAWINGS

1. NOT ALL RAILING CONDITIONS ARE SHOWN IN DETAIL. CONTRACTOR TO LAY OUT & DETAIL FULL SET OF NEW RAIL CONDITIONS, ELEMENTS, & DETAILS FOR SHOP DRAWING REVIEW & APPROVAL.

2. LAYOUT & DIMENSIONS ARE APPROXIMATELY SHOWN BASED ON EXISTING DRAWINGS AND FIELD OBSERVATIONS. CONTRACTOR SHALL

FIELD VERIFY ALL DIMENSIONS PRIOR TO SHOP DRAWING PREPARATION.

3. PREPARE FLOOR SLAB TO RECEIVE NEW FLOORING. INCLUDE FLOATING AS NEEDED. ALL RECESSED SLAB AREAS TO RECEIVE NEW MUD

BED TO MATCH ELEVATION OF ADJACENT SLAB.

4. INSTALL ALL FLOOR FINISH MATERIALS TIGHT TO DRYWALL AND MILLWORK

5. NEW TILE LAYOUT SHALL BE CENTERED.

6. ALL VERTICAL SURFACES WITHIN STAIR SHAFT & UNDERSIDE OF ALL STAIR RUNS TO BE PAINTED PT01.

7. ALL TILE GROUT JOINTS TO BE 1/16" OR SMALLEST GROUT LINE RECOMMENDED BY TILE MANUFACTURER TYP. CONFIRM GROUT LINE

DIMENSIONS FOR ALL TILE WITH ARCH. PRIOR TO INSTALL.

BASE BID FLOORING SCOPE:

ALL FLOORING AND BASE AS SHOWN ON THIS DRAWING

ALTERNATE 1: ALTERNATE 2: ALTERNATE 3:

FIRST FLOOR ONLY SECOND FLOOR ONLY THIRD & FOURTH FLOORS ONLY

FLOOR: CT01 FLOOR: CT01 FLOOR: CT01

N . C

E G

E A

V E

, T E

X A

in fo fit zp at ric ka rc hi te ct s.

co m

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

1" ACTUAL

3/3/26

JOB NUMBER

SHEET NUMBER

25.102

DATE

TREY GREER

SHEET REVISION HISTORY

PROJECT MANAGER

LIB

R , T

02/06/2026 ISSUED FOR CONSTRUCTION

1 2 3 4 5 6

STAIR & RAIL

DETAILS

A201

IF THE ABOVE DIMENSION DOES NOT MEASURE ONE INCH (1")

EXACTLY, THIS DRAWING HAS BEEN ENLARGED OR REDUCED,

AFFECTING ALL LABELED SCALES.

- 131 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

7. No more than one bowl of a multi-bowl sink shall be required to provide knee and toe clearance complying with 306.

606.3 Height. Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground.

EXCEPTIONS:

1. A lavatory in a toilet or bathing facility for a single occupant accessed only through a private office and not for common use or public use shall not be required to comply with 606.3.

2. In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (735

mm) minimum and 36 inches (915 mm) maximum, shall be permitted where rough-in plumbing permits connections of supply and drain pipes for sinks mounted at the height of 29 inches (735 mm).

606.4 Faucets. Controls for faucets shall comply with 309. Hand-operated metering faucets shall remain open for 10 seconds minimum.

606.5 Exposed Pipes and Surfaces. Water supply and drain pipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact. There shall be no sharp or abrasive surfaces under lavatories and sinks

607 Bathtubs

607.1 General. Bathtubs shall comply with 607.

607.2 Clearance. Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control end of the clearance. Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub.

Figure 607.2 Clearance for Bathtubs

607.3 Seat. A permanent seat at the head end of the bathtub or a removable in-tub seat shall be provided. Seats shall comply with 610.

607.4 Grab Bars. Grab bars for bathtubs shall comply with 609 and shall be provided in accordance with 607.4.1 or 607.4.2.

- 132 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

EXCEPTIONS:

1. Grab bars shall not be required to be installed in a bathtub located in a bathing facility for a single occupant accessed only through a private office and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.

2. In residential dwelling units, grab bars shall not be required to be installed in bathtubs located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 607.4.

607.4.1 Bathtubs With Permanent Seats. For bathtubs with permanent seats, grab bars shall be provided in accordance with 607.4.1.

607.4.1.1 Back Wall. Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.

607.4.1.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub.

Figure 607.4.1 Grab Bars for Bathtubs with Permanent Seats

607.4.2 Bathtubs Without Permanent Seats. For bathtubs without permanent seats, grab bars shall comply with 607.4.2.

607.4.2.1 Back Wall. Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub. Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.

607.4.2.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub.

607.4.2.3 Head End Wall. A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub.

- 135 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the controls or, where provided, not on the side of the clearance adjacent to the shower seat.

Figure 608.2.2 Standard Roll-In Type Shower Compartment Size and Clearance

608.2.3 Alternate Roll-In Type Shower Compartments. Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides. A 36 inch (915 mm) wide minimum entry shall be provided at one end of the long side of the compartment.

Figure 608.2.3 Alternate Roll-In Type Shower Compartment Size and Clearance

608.3 Grab Bars. Grab bars shall comply with 609 and shall be provided in accordance with 608.3.

Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor.

- 133 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

Figure 607.4.2 Grab Bars for Bathtubs with Removable In-Tub Seats

607.5 Controls. Controls, other than drain stoppers, shall be located on an end wall. Controls shall be between the bathtub rim and grab bar, and between the open side of the bathtub and the centerline of the width of the bathtub. Controls shall comply with 309.4.

Figure 607.5 Bathtub Control Location

607.6 Shower Spray Unit and Water. A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Bathtub shower spray units shall deliver water that is 120°F (49°C) maximum.

Advisory 607.6 Shower Spray Unit and Water. Ensure that hand-held shower spray units are capable of delivering water pressure substantially equivalent to fixed shower heads.

607.7 Bathtub Enclosures. Enclosures for bathtubs shall not obstruct controls, faucets, shower and spray units or obstruct transfer from wheelchairs onto bathtub seats or into bathtubs. Enclosures on bathtubs shall not have tracks installed on the rim of the open face of the bathtub.

- 134 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

608 Shower Compartments

608.1 General. Shower compartments shall comply with 608.

Advisory 608.1 General. Shower stalls that are 60 inches (1525 mm) wide and have no curb may increase the usability of a bathroom because the shower area provides additional maneuvering space.

608.2 Size and Clearances for Shower Compartments. Shower compartments shall have sizes and clearances complying with 608.2.

608.2.1 Transfer Type Shower Compartments. Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915 mm) wide minimum entry on the face of the shower compartment. Clearance of 36 inches (915 mm) wide minimum by 48 inches (1220 mm) long minimum measured from the control wall shall be provided.

Figure 608.2.1 Transfer Type Shower Compartment Size and Clearance

608.2.2 Standard Roll-In Type Shower Compartments. Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides and shall have a 60 inches (1525 mm) wide minimum entry on the face of the shower compartment.

608.2.2.1 Clearance. A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment.

- 135 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions

Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor.

- 136 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

EXCEPTIONS:

1. Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.

2. In residential dwelling units, grab bars shall not be required to be installed in showers located in bathing facilities provided that reinforcement has been installed in walls and located so as to permit the installation of grab bars complying with 608.3.

608.3.1 Transfer Type Shower Compartments. In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall.

Figure 608.3.1 Grab Bars for Transfer Type Showers

608.3.2 Standard Roll-In Type Shower Compartments. Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat. Where a seat is not provided in standard roll-in type shower compartments, grab bars shall be provided on three walls. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.

Figure 608.3.2 Grab Bars for Standard Roll-In Type Showers

608.3.3 Alternate Roll-In Type Shower Compartments. In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (150 mm) maximum from adjacent walls.

- 136 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

EXCEPTIONS:

608.3.1 Transfer Type Shower Compartments. In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall.

Figure 608.3.1 Grab Bars for Transfer Type Showers

Figure 608.3.2 Grab Bars for Standard Roll-In Type Showers

- 137 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers

608.4 Seats. A folding or non-folding seat shall be provided in transfer type shower compartments. A folding seat shall be provided in roll-in type showers required in transient lodging guest rooms with mobility features complying with 806.2. Seats shall comply with 610.

EXCEPTION: In residential dwelling units, seats shall not be required in transfer type shower compartments provided that reinforcement has been installed in walls so as to permit the installation of seats complying with 608.4.

608.5 Controls. Controls, faucets, and shower spray units shall comply with 309.4.

608.5.1 Transfer Type Shower Compartments. In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965

mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening.

Figure 608.5.1 Transfer Type Shower Compartment Control Location

- 137 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

Figure 608.3.3 Grab Bars for Alternate Roll-In Type Showers

608.5 Controls. Controls, faucets, and shower spray units shall comply with 309.4.

608.5.1 Transfer Type Shower Compartments. In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965

mm) minimum and 48 inches (1220 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening.

Figure 608.5.1 Transfer Type Shower Compartment Control Location

- 138 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

608.5.2 Standard Roll-In Type Shower Compartments. In standard roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from the seat wall.

Advisory 608.5.2 Standard Roll-in Type Shower Compartments. In standard roll-in type showers without seats, the shower head and operable parts can be located on any of the three walls of the shower without adversely affecting accessibility.

Figure 608.5.2 Standard Roll-In Type Shower Compartment Control Location

608.5.3 Alternate Roll-In Type Shower Compartments. In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor. Where a seat is provided, the controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685

mm) maximum from the side wall behind the seat or shall be located on the back wall opposite the seat 15 inches (380 mm) maximum, left or right, of the centerline of the seat. Where a seat is not provided, the controls, faucets, and shower spray unit shall be installed on the side wall farthest from the compartment entry.

- 139 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

Figure 608.5.3 Alternate Roll-In Type Shower Compartment Control Location

608.6 Shower Spray Unit and Water. A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided. The shower spray unit shall have an on/off control with a non-positive shut-off. If an adjustable-height shower head on a vertical bar is used, the bar shall be installed so as not to obstruct the use of grab bars. Shower spray units shall deliver water that is 120°F (49°C) maximum.

EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that are not medical care facilities, long-term care facilities, transient lodging guest rooms, or residential dwelling units.

Advisory 608.6 Shower Spray Unit and Water. Ensure that hand-held shower spray units are capable of delivering water pressure substantially equivalent to fixed shower heads.

608.7 Thresholds. Thresholds in roll-in type shower compartments shall be 1/2 inch (13 mm) high maximum in accordance with 303. In transfer type shower compartments, thresholds 1/2 inch (13

mm) high maximum shall be beveled, rounded, or vertical.

EXCEPTION: A threshold 2 inches (51 mm) high maximum shall be permitted in transfer type shower compartments in existing facilities where provision of a 1/2 inch (13 mm) high threshold would disturb the structural reinforcement of the floor slab.

- 141 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

609.4 Position of Grab Bars. Grab bars shall be installed in a horizontal position, 33 inches (840

mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets for children's use complying with 604.9, grab bars shall be installed in a horizontal position 18 inches (455 mm) minimum and 27 inches (685 mm) maximum above the finish floor measured to the top of the gripping surface. The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1.

609.5 Surface Hazards. Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges.

609.6 Fittings. Grab bars shall not rotate within their fittings.

609.7 Installation. Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space.

609.8 Structural Strength. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device, or supporting structure.

610 Seats

610.1 General. Seats in bathtubs and shower compartments shall comply with 610.

610.2 Bathtub Seats. The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. The depth of a removable in-tub seat shall be 15 inches (380 mm) minimum and 16 inches (405 mm) maximum. The seat shall be capable of secure placement. Permanent seats at the head end of the bathtub shall be 15 inches (380 mm) deep minimum and shall extend from the back wall to or beyond the outer edge of the bathtub.

Figure 610.2 Bathtub Seats

- 142 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

610.3 Shower Compartment Seats. Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. Where a seat is provided in an alternate roll-in type shower compartment, it shall be a folding type, shall be installed on the front wall opposite the back wall, and shall extend from the adjacent side wall to a point within 3 inches (75 mm) of the compartment entry. In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry. The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2.

Figure 610.3 Extent of Seat

610.3.1 Rectangular Seats. The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The side edge of the seat shall be 1 1/2 inches (38 mm) maximum from the adjacent wall.

Figure 610.3.1 Rectangular Shower Seat

- 143 - 2012 Texas Accessibility Standards Ɣ Effective March 15, 2012 Ɣ Texas Department of Licensing and Regulation

610.3.2 L-Shaped Seats. The rear edge of an L-shaped seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall. The rear edge of the "L" portion of the seat shall be 1 1/2 inches (38 mm) maximum from the wall and the front edge shall be 14 inches (355 mm) minimum and 15 inches (380 mm) maximum from the wall. The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall.

Figure 610.3.2 L-Shaped Shower Seat

610.4 Structural Strength. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure.

611 Washing Machines and Clothes Dryers

611.1 General. Washing machines and clothes dryers shall comply with 611.

611.2 Clear Floor Space. A clear floor or ground space complying with 305 positioned for parallel approach shall be provided. The clear floor or ground space shall be centered on the appliance.

611.3 Operable Parts. Operable parts, including doors, lint screens, and detergent and bleach compartments shall comply with 309.

611.4 Height. Top loading machines shall have the door to the laundry…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Mar 10, 2026.