1-Pre-Engineered Metal Building (PEMB) Design Criteria Ferron City Argricultural Center 2507-011.pdf

PRE-ENGINEERED METAL BUILDING

(PEMB)

DESIGN CRITERIA (SPECIFICATION)

Project Identification:

• Date: 8/20/2025

• Project Number: 2507-011

• Project Name: Ferron Agricultural Center

• Project Address: 165 S. State Street, Ferron, Utah 84523

• Latitude: 39.086458

• Longitude: -111.129959

• General Project Description:

39,083 sf PEMB Arena with attached 3,672 sf PEMB Office and a 6,490 sf PEMB Shed roof for stock pens. Fabricate Deliver PEMB components to project site. Installation by others.

Client Information:

• Organization: Ferron City

• Client Contact Name: Mayor Trent Jackson

• Address: 15 E Main Street, Ferron, Utah 84523

• Telephone: 435-384-2350

• Email: mayon@ferroncityutah.gov

Design Team:

• Architect Firm: Campbell Architecture

• Contact Name: Kim Campbell

• Address: 46 N. 200 E. St. George, Utah 84770

• Telephone: 435-628-5969

• Email: kim.c@campbelldesign.us

PEMB Procurement:

• PEMB Deposit: ☒ By Client ☐ By Other

• Cost of PEMB with Delivery: ☒ By Client ☐ By Other

PEMB Code Information:

• Occupancy: A-4

• Type of Construction: 5A

• Climatic Zone: 5B

• Building Risk Category: III

• Seismic Design Category: D

• Ground Snow Load: 33 PSF

• Spectral Response Acceleration for Short Periods: (Ss) -0.573

• Spectral Response Acceleration for 1-Sec. Period: (S1) -0.160

• Thermal Factor: 1.0 for Office, 1.2 for Arena and stock Pen

• Wind Speed: 108 MPH

• Wind Exposure Category: C

PEMB Footprint Information:

• Single PEMB ☐

• Single PEMB with Non-PEMB Attachments ☐

• Multiple PEMBs Separated by Expanding Joints ☒

• Number of PEMB Segments: 3

• Name of Each Segment:

▪ Main PEMB: Arena

▪ Attached PEMB: Office

▪ Attached PEMB: Stock Pen

▪ Attached PEMB:

PEMB Geometry- Main PEMB Name- Arena

• Footprint: 156’-4” x 250’

• Top of Steel: At Eve: 132’-0” or o Haunch Height:

• Pitch Slope: 1 in 12 ☒ Double Pitched ☐ Shed ☐ Hipped

Roof Assembly

• Gauge: 26

• Panel Style: PBR

• Purlin Size: As Require

• Finish: Galvalume

Wall Assembly

• Gauge: 26

• Panel Style: PBR

• Lap Panel on Face of Foundation: ☒

• Girt Sizes: 8”

• Girt Type: ☐ Bypass ☒ Inline

• Expansion Gap Per PEMB Engineer: ☒

• Non-PEMB Surface Wall Loads:

• Standard Exterior Panel Colors: See Elevations For Different Color Locations

Soffit Assembly

• Gauge:

• Panel Style:

• Soffit Support:

Interior Wall Liner

• Gauge: 26

• Panel Style: PBR

• Height of Panel Above Floor: See Plans

• Standard Interior Liner Color: See Elevations For Different Color Locations

Structural Main Frame

• Frame Shape: ☒ Tapered ☐ Straight

• Span Type: ☒ Full ☐ Half ☐ Third ☐ Quarter

• End Frames: ☒ Square ☐ With Bypass Girts

• Bottom of Frame on a: 24” High Stem Wall

• Bottom of Frame: ☐ Top of Floor ☐ Bottom of Floor ☐ Top of Stem Wall

• Flange Bracing: ☒ At Wall Main Frames ☒ At Roof Main Frames

• Standard Red Primer: ☒

PEMB Geometry - Attached PEMB Name- Office

• Footprint: 53’-10” x 68’-0”

• Top of Steel: At Eve: 16’-0” or o Haunch Height:

• Pitch Slope: 4 in 12 ☒ Double Pitched ☐ Shed ☐ Hipped

Roof Assembly

• Gauge: 26

• Panel Style: 12” Standing Seam with concealed fasteners

• Purlin Size: 8”

• Finish: Dark Bronze

Wall Assembly

• Gauge: 26

• Panel Style: PBR

• Lap Panel on Face of Foundation: ☒

• Girt Sizes: 8”

• Girt Type: ☐ Bypass ☒ Inline

• Expansion Gap Per PEMB Engineer: ☒

• Non-PEMB Surface Wall Loads:

• Standard Exterior Panel Colors: See Elevations For Different Color Locations

Soffit Assembly

• Gauge: 26

• Panel Style: PBR

• Soffit Support: 8” Perlins

Interior Wall Liner

• Gauge:

• Panel Style:

• Height of Panel Above Floor:

• Standard Interior Liner Color:

Structural Main Frame

• Frame Shape: ☒ Tapered ☐ Straight

• Span Type: ☒ Full ☐ Half ☐ Third ☐ Quarter

• End Frames: ☒ Square ☐ With Bypass Girts

• Bottom of Frame on a:

• Bottom of Frame: ☒ Top of Floor ☐ Bottom of Floor ☐ Top of Stem Wall

• Flange Bracing: ☐ At Wall Main Frames ☒ At Roof Main Frames

PEMB Geometry - Attached PEMB Name- Stock Pen

• Footprint: 50’ x 129’-10”

• Top of Steel: At Eve: 12’-0” or o Haunch Height:

• Pitch Slope: 1 in 12 ☐ Double Pitched ☒ Shed ☐ Hipped

Roof Assembly

• Gauge: 26

• Panel Style: PBR

• Purlin Size: 8”

• Finish: Galvalume

Wall Assembly

• Gauge:

• Panel Style:

• Lap Panel on Face of Foundation: ☐

• Girt Sizes:

• Girt Type: ☐ Bypass ☐ Inline

• Expansion Gap Per PEMB Engineer: ☒

• Non-PEMB Surface Wall Loads:

• Standard Exterior Panel Colors:

Soffit Assembly

• Gauge:

• Panel Style:

• Soffit Support:

Interior Wall Liner

• Gauge:

• Panel Style:

• Height of Panel Above Floor:

• Standard Interior Liner Color:

Structural Main Frame

• Frame Shape: ☒ Tapered ☐ Straight

• Span Type: ☒ Full ☐ Half ☐ Third ☐ Quarter

• End Frames: ☐ Square ☐ With Bypass Girts

• Bottom of Frame on a: 6” High Stem Wall

• Bottom of Frame: ☐ Top of Floor ☐ Bottom of Floor ☐ Top of Stem Wall

• Flange Bracing: ☐ At Wall Main Frames ☒ At Roof Main Frames

PEMB Exterior Trims and Components – Main PEMB Name: Arena

• Standard Eve Fascia: ☒

• Standard Rake Fascia: ☒

• Standard Ridge Cover: ☒

• Standard Gutters Size: 8” X 8” ☒

Below Top of Fascia.

• Standard Downspouts Size: 6 “X 6” ☒

• Trim on Doors and Window Openings ☒

• Roof Panel Skylights ☐

• Inside and Outside Corner Trims ☒

• OHD and Quantities By Others: ☒ #2 16’ X 16’ PEMB Openings

#3 16’ X 12’ PEMB Openings

#2 12’ X 12’ PEMB Openings

• Man Door with Frames and Quantities By Others: ☒ #4 3’- 4 1/2” X 7’-2 ¼” PEMB Opening

#2 6’- 4 ½” X 7’ – 2 1/4 PEMB Opening

• Window and Quantities By Others: ☐ #_____ ________ X ________

#_____ ________ X ________

#_____ ________ X ________

• Vent By Others: ☒ Continuing Girts Thru Openings.

#8 5’ X 18’ PEMB Opening

• PEMB Misc Opening: _______________________________ ☐

• Top Of Window A.F.F. _________

• Roof Insulation By Others: ☒

• Wall Insulation By Others: ☒

• Soffit Panels By Others: ☐

• Soffit Panels By PEMB: ☐

• Eve Overhang ________”

• Rake Overhang ________”

• Crane Footprint and Information:

PEMB Exterior Trims and Components – Attached PEMB Name: Office

• Standard Ridge Cover: ☒

• Standard Gutters Size: Click or tap here to enter text.

Below Top of Fascia.

• Standard Downspouts Size: Click or tap here to enter text. ☐

• Trim on Doors and Window Openings ☒

• Roof Panel Skylights ☐

• Inside and Outside Corner Trims ☒

• OHD and Quantities By Others: ☐ # PEMB Openings

# PEMB Openings

# PEMB Openings

• Man Door with Frames and Quantities By Others: ☒

• #2 6’- 4 1/2” X 7’-2 ¼” PEMB Opening

• # PEMB Opening

# PEMB Opening

• Window and Quantities By Others: ☒ #4 4’-0 ½” X 4’-0 ½” Openings

#1 2’-0 ½” X 4’-0 1/0” Opening

• Vent By Others: ☒ Continuing Girts Thru Openings.

#8 5’ X 8’ PEMB Opening

• PEMB Misc Opening: ☐

• Top Of Window A.F.F. 7’- 2 ¼”

• Roof Insulation By Others: ☒

• Wall Insulation By Others: ☒

• Soffit Panels By Others: ☐

• Soffit Panels By PEMB: ☒

• Eve Overhang ________”

• Rake Overhang ________”

• Crane Footprint and Information:____________

PEMB Exterior Trims and Components – Attached PEMB Name: Stock Pen

• Standard Ridge Cover: ☐

• Standard Gutters Size: 6 X 6 ☒

-Below Top of Fascia.

• Standard Downspouts Size: 5 X 5 ☒

• Trim on Doors and Window Openings ☐

• Roof Panel Skylights ☐

• Inside and Outside Corner Trims ☐

• OHD and Quantities By Others: ☐ # X PEMB Openings # X PEMB Openings # X PEMB Openings

• Man Door with Frames and Quantities By Others: ☐ # X PEMB Opening

# X PEMB Opening

# X PEMB Opening

• Window and Quantities By Others: ☒ #4 X

#1 X

# X

• Vent By Others: ☐ Continuing Girts Thru Openings.

# X PEMB Opening

• PEMB Misc Opening: ☐

• Top Of Window A.F.F.

• Roof Insulation By Others: ☐

• Wall Insulation By Others: ☐

• Soffit Panels By Others: ☐

• Soffit Panels By PEMB: ☐

• Eve Overhang ________”

• Rake Overhang ________”

• Crane Footprint and Information:___________________________________________

PEMB Auxiliary/Collateral Loads-

Main PEMB Name: Arena

• RTU Weights and Project Print, See DWGS ☐

• Ductwork Roof Suspended 4 PSF ☐

• Conduits Roof Suspended 1 PSF ☒

• Sprinkler Pipe Roof Suspended 5 PSF ☒

• Suspended Lighting 1 PSF ☒

• Lay-In Acoustic & GYP.BD. Ceilings 3 PSF ☐

• Suspended Ceiling Clouds 3 PSF ☐

• PVC Roof Membrane 0.6 PSF ☐

• ½” Dens Deck Covered 0.2 PSF ☐

• 5.2” Of Polyiso Roof Insulation 2 PSF ☐

• Metal Roof Decking on Purlins 2.5 PSF ☐

• Suspended Heaters Click or tap here to enter text. PSF ☐

• Suspended Big Ass Fans 3 PSF ☒

• Hose Reels Click or tap here to enter text. PSF ☐

Attached PEMB Name: Office

• Ductwork Roof Suspended 4 PSF ☒

• Conduits Roof Suspended 1 PSF ☒

• Sprinkler Pipe Roof Suspended 5 PSF ☒

• Suspended Lighting 1 PSF ☒

• Lay-In Acoustic & GYP.BD. Ceilings 3 PSF ☒

• Suspended Ceiling Clouds 3 PSF ☐

• PVC Roof Membrane 0.6 PSF ☐

• ½” Dens Deck Covered 0.2 PSF ☐

• 5.2” Of Polyiso Roof Insulation 2 PSF ☐

• Metal Roof Decking on Purlins 2.5 PSF ☐

• Suspended Heaters Click or tap here to enter text. PSF ☐

• Suspended Big Ass Fans 3 PSF ☐

Attached PEMB Name: Stock Pen

• Ductwork Roof Suspended 4 PSF ☐

• Conduits Roof Suspended 1 PSF ☒

• Sprinkler Pipe Roof Suspended 5 PSF ☒

• Suspended Lighting 1 PSF ☒

• Lay-In Acoustic & GYP.BD. Ceilings 3 PSF ☐

• Suspended Ceiling Clouds 3 PSF ☐

• PVC Roof Membrane 0.6 PSF ☐

• ½” Dens Deck Covered 0.2 PSF ☐

• 5.2” Of Polyiso Roof Insulation 2 PSF ☐

• Metal Roof Decking on Purlins 2.5 PSF ☐

• Suspended Heaters Click or tap here to enter text. PSF ☐

• Suspended Big Ass Fans 3 PSF ☒