015816.docx
DOCX document 17 KB Posted
- Attached to
- Y1LZ--693-222 | Parking Structure Solicitation Amendment 2 Federal contract opportunity
- Solicitation number
- 36C24420R0075
About this file
This document contains a federal contract solicitation and related project specifications. The solicitation is for the construction of a new parking structure to accommodate approximately 435 vehicles on the existing VA campus of the Wilkes-Barre VA Medical Center. The project shall provide all labor, materials, tools, equipment, permits, testing, and reports required to construct the parking garage according to the drawings and specifications. The magnitude of the VA project is between $10,000,000 to $20,000,000. This procurement is set aside for verified service-disabled veteran-owned small businesses and uses a tiered evaluation process down to the large business tier. Pricing shall be in whole dollars only. The contractor shall be responsible for proper worker classification and wage compliance.
View the file
Other files for this federal contract opportunity
Show all 50
Y1LZ--693-222 | Parking Structure Solicitation Amendment 2 has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PARKING GARAGE PROJECT NUMBER 693-222
DEPARTMENT OF VETERANS AFFAIRS
WILKES-BARRE, PENNSYLVANIA
SECTION 01 58 16
TEMPORARY INTERIOR SIGNAGE
PART 1 GENERAL
DESCRIPTION
This section specifies temporary interior signs.
PART 2 PRODUCTS
2.1 TEMPORARY SIGNS
| A. | Fabricate from 50 Kg (110 pound) mat finish white paper. |
| B. | Cut to 100 mm (4-inch) wide by 300 mm (12 inch) long size tag. |
| C. | Punch 3 mm (1/8-inch) diameter hole centered on 100 mm (4-inch) dimension of tag. Edge of Hole spaced approximately 13 mm (1/2-inch) from one end on tag. |
| D. | Reinforce hole on both sides with gummed cloth washer or other suitable material capable of preventing tie pulling through paper edge. |
| E. | Ties: Steel wire 0.3 mm (0.0120-inch) thick, attach to tag with twist tie, leaving 150 mm (6-inch) long free ends. |
PART 3 EXECUTION
3.1 INSTALLATION
| A. | Install temporary signs attached to room door frame or room door knob, lever, or pull for doors on corridor openings. |
| B. | Mark on signs with felt tip marker having approximately 3 mm (1/8-inch) wide stroke for clearly legible numbers or letters. |
| C. | Identify room with numbers as designated on floor plans. |
3.2 LOCATION
| A. | Install on doors that have room, corridor, and space numbers shown. |
| B. | Doors that do not require signs are as follows: |
| 1. | Corridor barrier doors (cross-corridor) in corridor with same number. |
| 2. | Folding doors or partitions. |
| 3. | Toilet or bathroom doors within and between rooms. |
| 4. | Communicating doors in partitions between rooms with corridor entrance doors. |
| 5. | Closet doors within rooms. |
| C. | Replace missing, damaged, or illegible signs. |
- - - E N D - - - 01 58 16 - 1
File details come from the government source that posted it. Updated .