Temporary Storage Devices
Added: Jul 13, 2011 12:53 pm
The National Strike Force Coordination Center intends to purchase eight (8) Temporary Storage Devices with the following characteristics:SALIENT CHARACTERISTICS1. Must be a commercial off the shelf product currently in production.2. Quick & easy to deploy from box or net into the water. (Provide deployment procedures.)3. Easy to decontaminate and/or dispose of.4. Easy to maintain & repair. (Provide maintenance and repair procedures.)5. Shallow water capable. (Max draft 10 feet).6. Capable of being able to be dragged over rock and beach (possibly coral).7. Compact storage and lightweight, with a maximum footprint of seven feet by nine feet. (Maximum size aluminum container: 100 in X 75 in X 66 in with four-directional forklift slots.)8. Capable of being towed from alongside a vessel at three knots. (Must include a means of securing/cinching the device to the hull of the vessel while in transit.)9. Capable of being towed from astern at five knots with a maximum bollard pull of 6,000 pounds. (Must include an appropriate towing assembly that includes: towing bridle and 150FT of 1 inch nylon double-braided line.)10. Capable of being towed safely by 18 foot RHI or small workboat using a 175 HP outboard motor.11. Capable of being connected / linked with multiple TSDs together in a train or rafting at anchor alongside.12. Design Life Span 20 years.13. Durable, abrasion resistant (bottom/sides), high tow tensile strength. (Provide fabric sample(s) and test data provided by manufacturer.)14. Navigation Lighting & visible coloring. (Requires compliance with navigation lighting standards.)15. Easy to fill, offload or decant recovered product (e.g. low or high viscosity fuel oils or emulsion) using one (for the smaller 50 m3size) or two (for larger 100 m3. size) CCN150s or DOP 250s pumps lowered into the storage device from the top. For offloading operations, this includes prevention of sucking fabric into pump. (Standard hatch cover provided must be 25 in inside diameter.)16. Safe to walk on when afloat and when full or empty. Includes requirement for reserve buoyancy such that device remains afloat when filled with product of density 1.02 g/cc.17. Is UV and Hydrocarbon resistant and resistance to wicking through reinforcing scrim (fabric, adhesive, seams).18. Has heavy duty tie off & anchoring points ("d" rings) that can handle up to seven knots flood current such as experienced on the Columbia River.19. Can be used in the following operating environment: -20 degrees F to 120 degrees F temperatures; 0 to 100% humidity; 30 knot wind load; seas up to 6 foot significant waves and 10 foot swells; uniform ice load ½ pound per square foot on all surfaces. Capable of storage of recoverable product temperatures up to 135 degrees F.20. Salt air and seawater resistant.21. For storage devices that use inflation chambers to maintain stability and reduce stowage size and weight: the device must remain afloat when full after one chamber is punctured.22. Capable of handling minimum 800 gallons per minute fill rate.23. Has flow/fill-monitoring device. DELIVERY DETAILSAll equipment shall be shipped to each respective Strike Team listed below: Atlantic Strike TeamAST (Fort Dix, NJ) USCG ATLANTIC STRIKE TEAM5614 DOUGHBOY LOOPFORT DIX, NJ 08640CWO TRACEY ALLEN: 609-724-0008, X217CWO DAVID STUDER: 609-351-8524MKC JESSE CARNS: 609- 234-0824Pacific Strike TeamPST (Novato, CA) USCG PACIFIC STRIKE TEAM8501 TANNER WILLIAMS RDNOVATO, CA 94949CWO MIKE JOLLY: 415-883-3311, X227CWO SHANE BARRINGTON: 415-883-3311, X245Gulf Strike TeamGST (Mobile, AL) USCG GULF STRIKE TEAM8501 TANNER WILLIAMS RDMOBILE, AL 36608CWO EDGARDO ESTRADA: 251-441-6601CWO CHRIS HINSCH: 251-441-6607INSPECTION AND ACCEPTANCEThe contractor shall conform to all of the requirements of the FAR parts 52.246-02 Inspection of Supplies-Fixed Price, 52.246-15 Certificate of Conformance, and 52.246-16 Responsibility for Supplies. First article testing to demonstrate compliance with salient characteristics shall be required prior to acceptance.PREPARATION FOR DELIVERY AND ONBOARD STOWAGEPacking: Packing and packaging shall be in accordance with good commercial practice to ensure safe delivery to each Strike Team. The overall stowage container must be conform to the TSD stowage containers standards that are in place for placement on board 225-foot USCG buoy tenders. Packaging must be capable of:(1) Being airlifted by a USCG HH-60 Jayhawk (with operational lifting capacity of 4000 pounds) and transported by a USCG or DOD C-130 aircraft. (2) Being lifted by a forklift, chainfall and shipboard crane.(3) Being tied down inside the stowage space using steel chains, cables, gripes and come-a-longs.(4) Resisting ocean saltwater intrusion and corrosion.(5) Protecting equipment from moving about during heavy seas.(6) Facilitating quick deployment of the all equipment within one hour.Boxes containing multiple components must contain the same information required below and the number of individual components contained within. 4x4 timber pieces will be provided as dunnage to keep boxes and palletized cargo off the deck and facilitate stowage around deck manhole covers.Marking: Interior and exterior containers shall be marked in accordance with MIL-STD-129. Barcoding of the item's National Stock Number* (NSN) or USCG Engineering Logistics Center's restocking item number shall be marked on each individual package. Printed precautions for the full protection as well as procedures for the deployment, recovery and maintenance of the equipment shall be prominently displayed.Training and Demonstration: Upon delivery to each Strike Team, the contractor shall provide initial deployment, recovery and preventative maintenance training to the new crew and maintenance contractor demonstrating the effective operation, maintenance and stowage of all components. This training may be done at each Strike Team or at a central location at the OHMSETT facility in Leonardo, NJ.
21-11-NSF_TEMPSTORDEV Department of Homeland Security US Coast Guard
7/13/11, 12:53 PM Plastic Locker Compartments
Added: Feb 11, 2009 10:01 am
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is being issued as a Request for Quotation (RFQ). Submit only written quotations for RFQ FA4800-09-Q-UJ02. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-16. This acquisition is set-aside for 100 % small businesses. The associated NAICS code is 424610 with a 500 employee's size standard. This RFQ contains 3 line items. The line item description is as follows: CLIN 0001-AA - 36 Unit Plastic Compartment Lockers: QTY 4 EACLIN 0002-AA - 20 Unit Plastic Compartment Lockers: QTY 4 EACLIN 0003-AA- 6 Unit Plastic Compartment Lockers: QTY 1 EA. The end item should meet the following minimum requirements: See attached drawings. End Item Description. Submittal of "Or Equal" items are allowed under this solicitation. When quoting an "or equal" item, offeror must submit all descriptive literature, specifications, catalogs, etc., along with their quotation, necessary to meet the requirements of this solicitation to be eligible for award. FOB point is Destination. The required delivery date is 1 March 09. PROVISIONS/CLAUSES. The provision at FAR 52.212-1, Instructions to Offerors - Commercial Item, applies to this acquisition. The provision at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items, applies to this solicitation and the offeror must include a completed copy of this provision with their proposal. FAR 52.212-4, Contract Terms and Conditions-Commercial Items, applies to this solicitation. The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statues or Executive Orders - Commercial Items, applies to this solicitation. Specifically, the following clauses cited are applicable to this solicitation, FAR 52.219-6, Notice of Total Small Business Aside, FAR 52.222-3, Convict Labor, FAR 52.222-19, Child Labor-Cooperation with authorities and Remedies, 52.222-21, Prohibition of Segregated Facilities, FAR 52.222-26, Equal Opportunity, FAR 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and other Eligible Veterans, FAR 52.222-36, Affirmative Action for Workers with Disabilities, FAR 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, FAR 52.225-13, Restriction on Certain Foreign Purchases, FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. The clause at DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statues or Executive Orders applicable to Defense Acquisition of Commercial Items, applies to this solicitation. Specifically, the following DFARS clauses cited are applicable to this solicitation: 252.204-7004, the Alternate A. Addenda to FAR 52.212-5: The following additional clauses apply to this solicitation: FAR 52.233-2, Service of Protest: (a) Protest, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the General Accounting Office (GAO), shall be served on the Contracting Officer Sheila Reshard-Bryant (addressed as follows) by obtaining written and dated acknowledgement of receipt from 1st Contracting Squadron, Attn: Richard Shipman, 74 Nealy Avenue, Langley AFB, VA 23665-2088. (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. The above Provisions and Clauses may be obtained via internet at http://farsite.hill.af.mil. All proposals must be faxed or emailed to POC Ursela C. Jackson. at 1 CONS/LGCB, 74 Nealy Avenue, Langley AFB, VA 23665-2088. EVALUATION OF QUOTATIONS/OFFERS: Quotes/offers will be evaluated IAW 13.106-2. Award will be made to the responsible offeror who's quote/offer represents the best value in terms of technical (capability of item(s) offered to meet the government need), price, and past performance, which will be most advantageous to the government. Quotes must be signed, dated and submitted by 16 February 2009, 1600 pm, Eastern Standard Time (EST) to the 1st Contracting Squadron/LGCB, Attn: Ursela C. Jackson, Contract Administrator, Commercial Phone 757-764-4923, Fax 757-764-7447, E-mail ursela.jackson@langley.af.mil, LATE OFFERS: Offerors are reminded that e-mail transmission of quote/offer prior to the closing date and time will not constitute a timely submission of quote/offer unless it is received by the government prior to the closing date and time. Quotations/offers or modification of quotes/offers received at the address specified for the receipt of offers after the exact time specified for receipt of offers WILL NOT be considered (ref. FAR 52.212-1(f)). All contractors must be registered in the Central Contractor Registration http://www.ccr.gov database prior to any contract award. Please submit the following information with each quote: Cage Code, DUNS number, Tax Identification Number, Prompt Payment Terms, Delivery Time, GSA Contract No. (if applicable), Date offer expires, warranty, Line item unit price, and Total cost.POINT OF CONTACTUrsela C. Jackson, Contract Administrator, Phone 757-764-4923, Fax 757-764-7447, Ursela.jackson@langley.af.mil.TSgt Richard Shipman, Contracting Officer, Phone 757-225-3150, Fax 757-764-7447, richard.shipman@langley.af.mil.Email your questions to Ursela C. Jackson at ursela.jackson@langley.af.mil
FA4800-09-Q-UJ02 Department of the Air Force Air Combat Command
2/11/09, 10:01 AM Sheet, Polyethylene, Static
Added: Dec 27, 2011 11:15 am
THE CONTRACTING OFFICE, PINE BLUFF ARSENAL HAS A REQUIREMENT FOR 565,650 EACH OF POLYETHYLENE SHEET, STATIC DISSIPATIVE POLYETHYLENE FILM, 9 +/- 1/32 X 7.20 +/-.03 X 0.010 IAW DWG 13019990, SPEC ANSI Y 14.5M,MIL-DTL-82646, MIL-DTL70549, MIL-A-2550, AND MIL-A-2550. ITEMS ARE TO BE DELIVERED TO: PINE BLUFF ARSENAL, PINE BLUFF, AR 71602-9500. THE NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM NAICS CODE 325188 IS APPLICABLE. ACQUISITION WILL BE CONDUCTED AS SMALL BUSINESS SET ASIDE. SOLICITATION W911RP-12-T-0006 WILL ISSUE ON OR ABOUT DECEMBER 31, 2011 WITH A CLOSING DATE OF JANUARY 9, 2012. SOLICITATION WILL BE POSTED TO THE ARMY SINGLE FACE TO INDUSTRY WEBSITE WWW.FBO.GOV POINT OF CONTACT IS ANGELIA GUYNN, CONTRACT SPECIALIST, 870-540-4087; FAX 870-540-3730
W911RP12T0013 Department of the Army Materiel Command Joint Munitions Command
12/27/11, 11:15 AM