Training Gear for Military Working Dogs
Added: Feb 01, 2012 11:50 am
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) and the reference number is 12TC150. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-55 and DFARS change notice 201201305. The Offeror must be an authorized dealer and must quote on an all or none basis. Written quotes are required (oral offers will not be accepted). Submission of quotes must be in accordance with FAR 52.212-1, Instructions to Offerors, Commercial Items. The Government will award a contract on the basis of the lowest priced, technically acceptable offer. Since award will be based on initial responses, offerors are highly encouraged to quote their most advantageous pricing in their initial response. Award will be made using the Simplified Acquisition Procedures in accordance with FAR 13.06-2. Please provide CAGE Code, DUNS, Tax Identification Number, FOB Point, Discount Terms, and Delivery Date in accordance with attached Request for Quote (RFQ_12TC150) document. Quotes must be valid through 17 April 2012. This is a 100 percent small business set-aside. The NAICS Code is 316999 and the size standard in number of employees is 500. To be eligible to receive an award resulting from this RFQ, Offerors must be registered in the DOD Central Contractor Registration (CCR) database, no exceptions. To register, please visit http://www.ccr.gov. Offerors shall electronically complete FAR 52.212-3 Offeror Representations and Certifications-Commercial Items at website http://www.bpn.gov/orca. The following clauses and provisions are applicable to this solicitation. FAR 52-211-17, Delivery of excess quantities; FAR 52.212-1, Instructions to Offerors-Commercial Items; FAR 52.212-4, Contract Terms and Conditions-Commercial Items, Addendum: Para c of this clause is tailored as follows: Changes in the terms and conditions of this contract may be made only by written agreement of the parties with the exception of administrative changes, such as changes in the paying office, appropriations data, etc., which may be changed unilaterally by the Government; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation); FAR 52.219-6, Notice of Total Small Business Set-Aside; FAR 52.219-28, Post-Award Small Business program Re-representation; FAR 52.222-19, Child Labor; FAR 52.222-26, Equal Opportunity; FAR 52.222-21, Prohibition of Segregated Facilities; FAR 52.222-50, Trafficking in Persons; FAR 52.223-18, Contractor Policy to Band Text Messaging While Driving; FAR 52.225-1, Buy American Act-Supplies; FAR 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration; FAR 52.233-3, Protest After Award; FAR 52.247-34, FOB Destination; DFARS 252.204-7003, Control of Government Personnel Work Product; DFARS 252.204-7004 Alt A, Central Contractor Registration (52.204-7) Alternate A; DFARS 252.232-7003, Electronic Submission of Payment Requests; FAR 52.252-1, Solicitation Provisions Incorporated By Reference; FAR 52-252-5, Authorized Deviations in Provisions; FAR 52.252-2, Clauses Incorporated By Reference; FAR 52.252-6, Authorized Deviations in Clauses; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (Deviation); AFFARS 5332.201-9101 Ombudsman. All clauses and provisions may be accessed electronically at http://farsite.hill.af.mil or www.arnet.gov. Offers must be received no later than 17 Feburary 2012, 1:00 p.m. (Central Time). Offers may be sent by fax, or electronically. The Point of Contact for this solicitation is Phillip Lopez, phillip.lopez.7@us.af.mil. Phone number is (210) 671-1773. Fax number is (210) 671-1433. The Contracting Officer is David Ramos, anastacio.ramos@us.af.mil Phone number is (210) 671-1752.
RFQ_12TC150 Department of the Air Force Air Education and Training Command
2/1/12, 11:50 AM Sources Sought
Added: Mar 04, 2009 4:02 pm
This Request for Information (RFI) is the initiation of market research under Part 10 of the Federal Acquisition Regulation (FAR) and is NOT a Request for Proposals (RFP). The Government does not intend to pay for information furnished pursuant to this RFI.
The Defense Supply Center Philadelphia (DSCP) seeks your expression of interest and any suggestion regarding DSCPS desire to established supply support of: Reconstituted Leather to help in the manufacture of headwear to support the DLA Military customers located worldwide.
Component Information: The needed material is a reconstituted leather, in a black pebbled gloss finish and shall be 6.0 to 6.5 ounces (169 to 183 g) thick. It is utilized in the bottom ply of the visor for the FRAME, CAP, MANS (MC).
Reference Documents:
MIL-F-20268G (MC) dtd 26 October 1989
MIL-F-20268F (MC) dtd 06 June 1983
Vendors may submit samples to the Contracting Specialist to be used in a visual examination. Any samples received, for which vendors indicate proprietary or confidential materials, will be received and held in confidence for U.S. Government use only. Vendors will not be paid for any samples submitted. No samples will be returned to the vendor; however, vendors may retrieve samples at their own expense. DSCP reserves the right to dispose of unrestrained samples as necessary. Any result of the visual examination will be for informational purposes only, and will not result in contract or any other form of legally-binding agreement.
DSCP will offer any vendor who is interested the opportunity to make an oral/audio/visual presentation of their information. For an appointment, contact the Contracting Specialist below.
Responses to this RFI that indicate that the information therein is proprietary or represents confidential business information will be received and held in confidence for U.S. Government use only. However, DSCPs intent is to analyze the information provided from industry as a whole, and develop future strategies. All samples submitted must be accompanied by paperwork citing this RFI number, dated and sample retrieval date. In addition, the participant shall indicate they are providing samples that conform to current military specifications or represent a commercial alternative.
NOTE: DUE TO CERTAIN REQUIREMENTS, THE ITEM MUST BE MANUFACTURED IN THE UNITED STATES FROM 100% DOMESTIC PRODUCTS.
Please provide written responses by close of business, March 19, 2009 by 3:00pm EST, to the following address:
Defense Supply Center Philadelphia
ATTN: Jillian Randazzo FQCC, 6D064
700 Robbins Avenue
Philadelphia, PA 19111
SPM1C1-09-R-Leather Defense Logistics Agency Troop Support Clothing and Textiles
3/4/09, 4:02 PM HOLSTER SYSTEM
Added: March 13, 2008
This is a sources sought notice to seek potential sources that can provide Commercial-Off-the-Shelf (COTS) M9 Pistol Modular Holster System. Headquarters Air Force Security Forces Center, Force Protection Commodity Council (FPCC), is conducting market research to determine availability of a COTS M9 Pistol Modular Holster System in the commercial marketplace. The COTS holster must meet or exceed the government's minimum requirements or can be modified to meet these requirements. This sources sought is solely for planning purposes and does not constitute an invitation for bid nor request for proposal, and is not to be construed as a commitment by the Government. Large and small businesses are encouraged to participate in this survey. The information you provide may be used by the Government in developing an acquisition strategy and purchase description. Industry is encouraged to respond with information not constrained by proprietary data rights. However, if proprietary data is included in your reply, please mark it appropriately. The following is a list of the government?s minimum requirements for the M9 Pistol Modular Holster System: designed for the USAF M9 (Beretta 92F) pistol; should be capable of fitting an M9 pistol with weapon mounted flashlight or laser aiming device; three levels of retention; constructed of injection molded carbon fiber composites; uses a natural draw motion; no straps or flaps that may accidentally open during movements; easy to train within any configuration and environment (tactical or law enforcement); system must be able to be mounted securely to a law enforcement duty belt, thigh platform, modular lightweight load-bearing equipment (MOLLE) vest, and shoulder harness; shoulder harness must fit personnel with a chest size ranging from 32 to 57 inches; shoulder harness must secure to a belt or trousers via a belt loop and a suspender snap closer; system must have a device that allows it to transition from each platform and lock into place with minimal to no tools; system must have a trigger housing locking lug; system must be available for right and left hand operators; system must be available in sage green, tan, and black; system must be beveled on the end near the barrel of the weapon to prevent rock, dirt and debris from getting into the barrel, yet allow water and debris to drain or fall out; and system should have a mechanism (hood, or cover) to protect the hammer of the weapon.Please provide the following information in response to this notice: technical specifications for your product (including drawings, test data, descriptive literature, etc. If available, please send your catalog (to include pictures of your product) and pricelist. Responses should contain company name, address, point of contact, cage code, phone number, fax number, and business size. Please submit your response to TSgt Ervin A. Tate and MSgt Richard Lafranchise by 11 April 2008. Responses should be submitted to the attention of TSgt Ervin A. Tate and MSgt Richard Lafranchise, address HQ AFSFC/SFXX, 1517 Billy Mitchell Blvd, Bldg 954 Lackland AFB, TX 78236, phone (210) 925-5020 or (210) 925-0418, email address ervin.tate@us.af.mil or richard.lafranchise@lackland.af.mil.
Reference-Number-AFPCCSSHOLSTER Department of the Air Force Air Education and Training Command
3/13/08, 12:00 AM Vehicular equipment components.
Added: Jul 09, 2008 5:41 pm
BELT, VEHICULAR SAFETY. NSN: 2540-12-375-2093. MANUFACTURER P/N: AUTOFLUG GMBH P/N: AFG076056-03. QTY: 100 EACH. NO OPTION. FOB: ORIGIN. RESTRICTED TO EITHER AUTOFLUG GMBH, CAGE CODE D1131 PART NUMBER. THE SOLICITATION WILL BE RELEASED TO THE TACOM WEBSITE ON OR ABOUT 10 JULY 2008. THE OFFER DUE DATE IS ON OR ABOUT 10 AUGUST 2008 (SEE SOLICITATION FOR ACTUAL DUE DATE). ALL RESPONSIBLE SOURCES MAY SUBMIT AN OFFER, WHICH WILL BE CONSIDERED. NO HARD COPIES OF THE SOLICITATION WILL BE ISSUED; YOU MUST DOWNLOAD IT FROM THE TACOM ACQUISITION WEBSITE: HTTP://CONTRACTING.TACOM.ARMY.MIL/OPPORTUNITY.HTM
W56HZV08Q0901 Department of the Army Materiel Command Contracting Command Detroit Arsenal
7/9/08, 5:41 PM