County Road 220 Phase 2 – Milling and Resurfacing
Open State & local contract opportunity Posted
- Solicitation number
- 25/26-119
- State
- Florida
- Responses due
Opportunity facts
- Jurisdictions
- Point of contact
-
- Jerry Horton jerry.horton@claycountygov.com (904) 946-0155
Opportunity details come from constructionbidsource.com. Updated .
About this opportunity
Clay County Board of County Commissioners is requesting bids for County Road 220 Phase 2 milling and resurfacing under an Invitation for Bid, with bids due November 30, 2026 at 4:00 p.m. and a mandatory pre-bid meeting on October 29, 2026 at 9:00 a.m. at the Clay County Administration Building. Contractors must be Florida Department of Transportation prequalified in Flexible Paving and Hot Plant-Mixed Bituminous Courses and must self-perform a minimum of 40 percent of the overall contract work with their own workforce — both are capability filters.
The scope consists of a mill-and-fill operation along County Road 220 from the new asphalt joint just west of Lakeshore Drive West to the east side of the CSX asphalt joint at Sleepy Hollow Road. Work includes milling approximately 1.75 inches of existing asphalt pavement, resurfacing with 2 inches of Asphaltic Concrete SP-12.5 (Traffic Level C) per current FDOT Standards and Specifications, maintenance of traffic, quality control, milling and resurfacing of designated turnouts, pavement markings totaling over 67,000 linear feet and 1,925 individual items, daily cleanup, and associated work. All work must be performed during nighttime hours between 7:00 p.m. and 5:30 a.m., with access maintained throughout construction. Line items cover milling operations (70,440 square yards), asphaltic concrete placement (7,780 tons), and tack coat (10,000 gallons).
Contractors must achieve substantial completion within 45 calendar days from Notice to Proceed and final completion within 30 additional days. Performance and payment bonds at 100 percent of contract value are required, as are comprehensive insurance coverage (commercial general liability $1,000,000 per occurrence/$2,000,000 aggregate, workers' compensation at statutory limits, and business automobile liability $1,000,000 combined single limit). A five percent bid bond is required. A two-year warranty follows final acceptance. Questions are due November 11, 2026 at 4:30 p.m. Bid opening is scheduled December 1, 2026, with anticipated Board recommendation December 8, 2026. Liquidated damages apply per FDOT Specifications Section 8-10.
Opportunity text
Clay County Board of County Commissioners is requesting bids from qualified Contractors for CR 220 Phase 2 Milling and Resurfacing. The project consists of a mill-and-fill operation along County Road 220, including milling approximately one and three-quarter inches (1.75") of existing asphalt pavement and resurfacing with two inches (2") of Asphaltic Concrete SP-12.5, Traffic Level C, in accordance with current Florida Department of Transportation (FDOT) Standards and Specifications. The project also includes maintenance of traffic, quality control, milling and resurfacing of designated turnouts, pavement markings, daily cleanup, and associated work necessary for a complete project. Work on CR 220 will be performed during nighttime hours between 7:00 p.m. and 5:30 a.m., with access maintained throughout construction.
Files
| File | Type | Posted |
|---|---|---|
| County_Road_220_Phase_2_-_Milling_and_Resurfacing.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity