Wet Dust Collector Combined Synopsis / Solicitation

Closed Solicitation Posted

This opportunity was awarded. See the award notice from .

Solicitation number
FA8125-20-Q-0028
Agency
Air Force Sustainment Center Air Force Materiel Command, Department of Defense
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
333413 Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing
PSC
4460 Air Purification Equipment
Place of performance
Tinker AFB, Oklahoma 73145, United States

Notice details come from SAM.gov. Updated .

Notice text

2 versions

Update #2 · Latest ·

This effort requires the purchase of one (1) each Wet Dust Collector with Peripherals to include delivery, installation, performance verification, and training in Building 3705, Post D-30 at Tinker Air Force Base OK.  The Wet Dust Collector will meet the following requirements:

  • The item shall have a minimum of 10 horsepower.
  • The item shall meet the electrical requirements of 460V 3PH 60HZ 18A.
  • Item shall have Direct Drive with Airfoil Design and Non-Overloading.
  • Item shall have a minimum air volume of 4400 CFM.
  • Item shall have a Magnetic Motor Starter with Overload protection and a push button start/stop.
  • Item shall have a PLC Controlled Water Level with High and Low Water Indicator Lights.
  • Item shall have a Magnehelic Gauge.
  • Item shall include and utilize MERV 11 Legacy Pre-Filters with a 60% Efficiency Rating.
  • Item shall include and utilize HEPA Afterfilters with a 99.97% Efficiency Rating.
  • Item shall include a High Temperature Shutdown Switch.
  • Item shall be constructed of Heavy Welded Galvanized Steel, or Stainless Steel, with a Dura-Plate 239 Coating Throughout. Parts that do not touch water can be powser coated mild steel.
  • Item shall include Fork Lift Pockets.
  • Item shall be a maximum of ten (10) ft. tall and a maximum of (5) ft. wide.
  • Item shall include a safety powered vent fan that runs all times that the primary blower is off which includes controls.
  • Item shall have an aluminum blower wheel (or a backward inclined, spark-resistant blower wheel) and cone for added spark resistance with corrosion control for humid environments.
  • Item shall meet the minimum requirements for NFPA484.
  • Contractor shall provide installation, training, and performance verification IAW the SOW.
  • Contractor shall warranty the Wet Dust Collector for a period of no less than one (1) year.

All questions regarding the updated Item Description, Statement of Work, or the recent site visits are due to the Government no later than 2:00 PM CST on 14 February 2020.

Update #1 ·

This effort requires the purchase of one (1) each Wet Dust Collector with Peripherals to include delivery, installation, performance verification, and training in Building 3705, Post D-30 at Tinker Air Force Base OK.  The Wet Dust Collector will meet the following requirements:

  • The item shall have a minimum of 10 horsepower.
  • The item shall meet the electrical requirements of 460V 3PH 60HZ 18A.
  • Item shall have Direct Drive with Airfoil Design and Non-Overloading.
  • Item shall have a minimum air volume of 4400 CFM.
  • Item shall have a Magnetic Motor Starter with Overload protection and a push button start/stop.
  • Item shall have a PLC Controlled Water Level with High and Low Water Indicator Lights.
  • Item shall have a Magnehelic Gauge.
  • Item shall include and utilize MERV 11 Legacy Pre-Filters with a 60% Efficiency Rating.
  • Item shall include and utilize HEPA Afterfilters with a 99.97% Efficiency Rating.
  • Item shall include a High Temperature Shutdown Switch.
  • Item shall be constructed of Heavy Welded Galvanized Steel, or Stainless Steel, with a Dura-Plate 239 Coating Throughout.
  • Item shall include Fork Lift Pockets.
  • Item shall be a maximum of ten (10) ft. tall and a maximum of (4) ft. wide.
  • Item shall include a safety powered vent fan that runs all times that the primary blower is off which includes controls.
  • Item shall have an aluminum blower wheel and cone for added spark resistance with corrosion control for humid environments.
  • Item shall meet the minimum requirements for NFPA484.
  • Contractor shall provide installation, training, and performance verification IAW this SOW.
  • Contractor shall warranty the Wet Dust Collector for a period of no less than one (1) year.

​​​​​​​

Attachments

Files attached to this notice, newest first
File Type Posted
A20-002 CLEMCO Wet Duster Collector B3705 - Item Description.docx DOCX document
A20-002 CLEMCO Wet Duster Collector B3705 - SOW.docx DOCX document
12 QandA 28Feb2020.docx DOCX document
12 FA8125-20-Q-0028 AM 05.docx DOCX document
12 FA8125-20-Q-0028 AM 04b.docx DOCX document
Vendor Q&A_13Feb.docx DOCX document
A20-002 CLEMCO Wet Duster Collector B3705 - Item Description - Rev.pdf PDF
12 FA8125-20-Q-0028 AM 04.docx DOCX document
A20-002 CLEMCO Wet Duster Collector B3705 - SOW.docx DOCX document
12 FA8125-20-Q-0028 AM 03.docx DOCX document
12 FA8125-20-Q-0028 AM 02.docx DOCX document
12 FA8125-20-Q-0028 AM 01.docx DOCX document
12 FA8125-20-Q-0028 FINAL RFQ.docx DOCX document
12 FA8125-20-Q-0028 Rev SOW.pdf PDF
Show all 14

Notice history

Notices posted for this opportunity, newest first
Notice Type Posted
Wet Dust Collector Award Award Notice
Wet Dust Collector Combined Synopsis / Solicitation This notice · Latest solicitation Solicitation

On GovTribe

Work this opportunity on GovTribe

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity