STUD, CONTINUOUS THREADED (BOLT-STUD), NICKEL COPPER ALUMINUM (K-MONEL) BOA Item 7016AE
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N3904026Q5228
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332722 Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- PSC
- 5307 Studs
- Place of performance
- Kittery, Maine 03904, United States
Notice details come from SAM.gov. Updated .
About this opportunity
Portsmouth Naval Shipyard, operating under the Department of the Navy Naval Sea Systems Command, is soliciting quotations for K-Monel continuous threaded studs (bolt-studs) with specifications of 0.750"-10UNC-3A X 18.000" nominal size, with a total requirement of 1,872 linear inches. Prospective contractors must demonstrate technical capability, provide competitive pricing, and demonstrate past performance, as the government will evaluate all proposals on a Lowest Price Technically Acceptable (LPTA) basis. Vendors are required to possess the 2021 Portsmouth Naval Shipyard Fastener Program Manual and must either maintain a Basic Ordering Agreement satisfying Higher-Level Contracting Quality Requirements under MIL-I-45208 or hold ISO 9001/9002 certification. The response deadline is February 2, 2026 at 10:00 AM ET, and all quotations must be submitted via email to Lauren LeDuc at lauren.w.leduc.civ@us.navy.mil, with all contractors required to be registered in the System for Award Management (SAM) database.
This solicitation is designated as a Total Small Business set-aside under NAICS code 332722 (Bolt, Nut, Screw, Rivet, and Washer Manufacturing) with a 600-employee size standard, making it available exclusively to qualifying small business concerns. The required delivery date for all materials is September 7, 2026, with performance to take place at Portsmouth Naval Shipyard in Kittery, Maine. No incumbent contractor or award value is specified in this notice, though payment options include Wide Area Workflow (WAWF) and Government Commercial Purchase Card for purchases up to $100,000. Vendors should anticipate providing a Contract Data Requirements List along with their quotations and must clearly indicate mobilization time and F.O.B. destination status in their responses.
Notice text
COMBINED SYNOPSIS/SOLICITATION NOTICE:
Requirement Title: STUD, CONTINUOUS THREADED (BOLT-STUD), NICKEL COPPER ALUMINUM (K-MONEL)
Solicitation Number: N3904026Q5228
BOA Item: 7016AE NSN: 1H 5307-01-285-7224 X2
Response Deadline: 02/02/2026 10:00 AM ET
POC: Lauren LeDuc 207-438-6635 lauren.w.leduc.civ@us.navy.mil
Alternate POC: Victoria Maclellan 207- 451-0941 victoria.b.maclellan.civ@us.navy.mil
GENERAL INFORMATION:
1. This is a combined synopsis/solicitation for non-commercial products under Simplified Acquisition Procedures prepared in accordance with the format in FAR Subpart 13.105, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued Paper copies of this solicitation will not be available. This combined synopsis/solicitation SHALL be posted on SAM.gov.
2. This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 and DFARS Change Notice 2025-1001. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses:
https://www.acquisition.gov/browse/index/far and http://www.acq.osd.mil/dpap/dars/change_notices.html.
3. This solicitation is being issues as a(n): Request For Quotation (RFQ)
4. This acquisition is for: Small Business Set-Aside
5. North American Industry Classification System Code (NAICS): 332722 Bolt, Nut, Screw, Rivet, and Washer Manufacturing
6. The size standard is: 600 (# of employees)
REQUIREMENT INFORMATION:
The Portsmouth Naval Shipyard requests responses from sources capable of providing the following:
- Required Delivery Date: 7 September 2026
- Place of Performance: Portsmouth Naval Shipyard
Kittery, ME, 03904
METHOD OF PROPOSAL SUBMISSION:
Offers shall be emailed. All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM): Vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/.
All quotes shall include page 2 of combined synopsis, please complete all fields highlighted in yellow
Files
| File | Type | Posted |
|---|---|---|
| N3904026Q5228_ RFQ.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| STUD, CONTINUOUS THREADED (BOLT-STUD), NICKEL COPPER ALUMINUM (K-MONEL) BOA Item 7016AE | Award Notice | |
| This notice | Solicitation | |
| STUD, CONTINUOUS THREADED (BOLT-STUD), NICKEL COPPER ALUMINUM (K-MONEL) BOA Item 7016AE | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Assorted Studs | Land and Maritime | Total Small Business | |
| Stud, continuous THR | Naval Supply Systems Command | No set-aside | |
| Stud, continuous thread | Land and Maritime | No set-aside | |
| Hardware (HEX head capscrews & bolts) | Land and Maritime | Total Small Business | |
| Northrop Grumman Valve Stem Fasteners | Land and Maritime | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity