Cap Screws
Open Solicitation Posted
- Solicitation number
- SPMYM327Q7006
- Agency
-
Land and Maritime
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332722 Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- PSC
- 5305 Screws
- Place of performance
- Kittery, Maine 03904, United States
- Points of contact
-
- DLA-KME PNSY Email Box pnsysupplyquotations@us.navy.mil
- Mihaela Zouak mihaela.c.zouak.civ@us.navy.mil (207) 438-3871
Notice details come from SAM.gov. Updated .
About this opportunity
Defense Logistics Agency Land and Maritime is soliciting quotes for capscrews requested by Portsmouth Naval Shipyard, with quotes due December 1, 2026. The procurement is a Total Small Business set-aside processed as 100% SBSA, and it is evaluated on Lowest Price Technically Acceptable (LPTA) criteria.
Place of performance is Kittery, Maine 03904. The notice is a combined synopsis/solicitation for commercial items under FAR Part 12 and serves as the only solicitation, with no written solicitation to follow. The RFQ number is SPMYM327Q7006. Interested parties must complete the RFQ paperwork attached to the notice as "RFQ SPMYM327Q7006" to be considered for award, and only one quote per vendor will be accepted.
Line item 0001 calls for 6 each 1/2-13UNC-3A x 7-1/2" self-locking hex head capscrews, alloy steel Grade 5, zinc plated per ASTM B633 Type II SC-2, to MIL-DTL-1222J Type I, with self-locking features per MIL-DTL-18240F Amendment 1 and head markings of a minimum of six dots. Non-manufacturers must provide proof of traceability by the solicitation deadline. SPRS will determine vendor responsibility, and offerors will be screened under FAR 9.104.
The procurement is classified under NAICS 332722, Bolt, Nut, Screw, Rivet, and Washer Manufacturing, with a 600-employee size standard and PSC 5305, Screws. The notice was posted November 19, 2026.
Notice text
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM327Q7006. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 Efective Date 03/13/2026 and DFARS Change Notice 20260702.
It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address:
https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and http://www.acq.osd.mil/dpap/dars/change_notices.html
The FSC Code is 5305 and the NAICS code is 332722. The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% SBSA.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
Only one quote per vendor will be accepted. Interested parties must fill out the required request for quote paperwork to be considered for award. It is in the attachment section and titled “RFQ SPMYM327Q7006”. If you are not the manufacturer, proof of traceability is required by the solicitation deadline.
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
ITEM DESCRIPTION QTY U/I
0001 HEX SLF LKG HEAD CAPSCREW 6 EA
HEX HEAD SLF LKG CAPSCREW, 1/2 -13UNC-3A X 7-1/2" LG, MIL-DTL-1222J TY-I, ALLOY STEEL, GRADE-5, ZINC PLATED IAW ASTM B633 TY-II SC-2; SELF LKG IAW MIL-DTL- 18240F AMEND-1, ANY TYPE. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY)
0002 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
A001 EXHIBIT A, SEQ A001
See Exhibit “A” Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “A” Seq A002: CDRL DI-MISC-82386 (Certification / Data Report)
0003 SLF LKG HEX SOCKET 4 EA
SLF LKG HEX SOCKET (CYLINDRICAL) HEAD CAPSCREW, 1-1/2 -6UNC-2A X 3-1/2” LG, FF-S-86H ALLOY STEEL, TYPE-VI, MIL-DTL-18240F(1) TYPE-N. MARKINGS OF A MINIMUM 6 DOTS (APPROX. 0.032) RAISED OR DEPRESSED (APPROX. 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE LOCATION IF NECESSARY).
0004 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
B001 EXHIBIT B, SEQ B001
See Exhibit “B” Seq B001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “B” Seq B002: CDRL DI-MISC-82386 (Certification / Data Report)
0005 HEX SLF LKG HEAD CAPSCREW 3 EA
HEX HD CAPSCREW, 1/2 - 13UNC-2A X 1” LG, STL, MIL-DTL-1222J, TYPE-I, GR B-7.
0006 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
C001 EXHIBIT C, SEQ C001
See Exhibit “C” Seq C001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “C” Seq C002: CDRL DI-MISC-82386 (Certification / Data Report)
0007 HEX SLF LKG HEAD CAPSCREW 8 EA
HEX HEAD CAPSCREW 1/2-13UNC-2A X 2” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL TO BE ALLOY STEEL GRADE-B7,
0008 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
D001 EXHIBIT D, SEQ D001
See Exhibit “D” Seq D001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “D” Seq D002: CDRL DI-MISC-82386 (Certification / Data Report)
0009 HEX HEAD CAPSCREW 5 EA
HEX HEAD CAPSCREW 1-8UNC-2A X 4” LONG, MIL-DTL-1222J TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED.
0010 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
E001 EXHIBIT E, SEQ E001
See Exhibit “E” Seq E001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “E” Seq E002: CDRL DI-MISC-82386 (Certification / Data Report)
0011 HEX HEAD CAPSCREW 4 EA
HEX HEAD CAPSCREW 1-8UNC-2A X 4-1/4” LONG, MIL-DTL-1222J, TYPE-I. MATERIAL SHALL BE ALLOY STEEL GRADE-8. NO COATING ALLOWED
0012 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
F001 EXHIBIT F, SEQ A001
See Exhibit “F” Seq F001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “F” Seq F002: CDRL DI-MISC-82386 (Certification / Data Report)
0013 CAPSCREW 4 EA
HEXAGON SOCKET (CYLINDRICAL) HEAD CAP SCREW, 1-8UNRC-3A X 2-1/4 IN LG, NICUAL, FF-S-86J TY-VI, QQ-N-286D, CD, AN, AH.
0014 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
G001 EXHIBIT G, SEQ G001
See Exhibit “G” Seq G001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “G” Seq G002: CDRL DI-MISC-82386 (Certification / Data Report)
0015 FLAT HEAD SCREW 6 EA
FLAT HEAD 82 DEGREE SLF LKG MACHINE SCREW, 0.500-13UNC-3A X 2.000 IN. LG. MFR IAW FF-S-92D TYPE III (CROSS RECESS DESIGN I) STYLE 2C (FLAT HEAD 82 DEGREE). MAT’L IS CADMIUM PLATED STEEL. SLF LKG IAW MIL-DTL-18240F AMEND 1 TYPE “L OR P”. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED. SIDE LOCATION IF NECESSARY).
0016 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
H001 EXHIBIT H, SEQ H001
See Exhibit “H” Seq H001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “H” Seq H002: CDRL DI-MISC-82386 (Certification / Data Report)
0017 SAME AS ITEM 0015 30 EA
0018 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
I001 EXHIBIT I, SEQ I001
See Exhibit “I” Seq I001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “I” Seq I002: CDRL DI-MISC-82386 (Certification / Data Report)
0019 SOCKET HEAD CAP SCREW 16 EA
SOCKET HEAD CAP SCREW, 1/4-20UNC-3A X 5/8 LNG, MIL-DTL-1222J TY-II, NICUAL, GR-500, QQ-N-268G, CD, ANLD, AH.
0020 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
J001 EXHIBIT J, SEQ J001
See Exhibit “J” Seq J001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “J” Seq J002: CDRL DI-MISC-82386 (Certification / Data Report)
0021 HEX HEAD CAP SCREW 32 EA
HEX HEAD CAP SCREW, 5/16-18UNC-2A X .875 LNG, MIL-DTL-1222J TY-I, NICUAL, GR-500, QQ-N-286G.
0022 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
K001 EXHIBIT K, SEQ K001
See Exhibit “K” Seq K001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “K” Seq K002: CDRL DI-MISC-82386 (Certification / Data Report)
0023 SOCKET HEAD CAP SCREW 3 EA
HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 3/4-10UNC-2A X 2 ¼ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE ANY. MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY).
0024 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
L001 EXHIBIT L, SEQ L001
See Exhibit “L” Seq L001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “L” Seq L002: CDRL DI-MISC-82386 (Certification / Data Report)
0025 SOCKET HEAD CAP SCREW 2 EA
HEXAGON SOCKET CYLINDRICAL HEAD CAP SCREW, 1/2-13UNC-2A X 3 LNG, FF-S-86J TY-VY, NICU, QQ-N-281D AMEND 2. THREADS NEED TO BE EXTENDED TO WITHIN 1/4 IN OF HEAD.
0026 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
M001 EXHIBIT M, SEQ M001
See Exhibit “M” Seq M001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “M” Seq M002: CDRL DI-MISC-82386 (Certification / Data Report)
0027 SOCKET HEAD CAP SCREW 16 EA
HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREW 82° INCLUDED ANGLE SELF LOCKING, 5/8-11UNRC-3A X 1 ½ LNG, NICUAL, QQ-N-268G, FM 2, ANLD, AH, FF-S-86J TY-IV, SELF LOCKING PER MIL-DTL-18240F TYPE L OR P . MARKINGS OF A MINIMUM (6) DOTS (APPROXIMATELY 0.032 DIA) RAISED OR DEPRESSED (APPROXIMATELY 0.010) SHALL BE PLACED ON THE HEAD OF THE FASTENER (TOP PREFERRED, SIDE IF NECESSARY)
0028 DATA REQUIREMENTS 1 EA ___NSP____ ___NSP_____
N001 EXHIBIT N, SEQ N001
See Exhibit “N” Seq N001: CDRL DI-MISC-81356A (Certificate of Compliance).
See Exhibit “N” Seq N002: CDRL DI-MISC-82386 (Certification / Data Report).
NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016 AND INCLUDE THE COMPLETED PROVISIONS WITH THEIR OFFER.
FAR CLAUSES AND PROVISIONS
Clause/Provision
Title
52.203-19
Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements
52.204-7
System for Award Management
52.204-10
Reporting Executive Compensation and First-Tier Subcontract Awards
52.204-13
System for Award Management Maintenance
52.209-11
Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law
52.211-14
Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use.
52.211-15
Defense Priority and Allocation Requirements
52.212-1
Instructions to Offerors—Commercial Products and Commercial Services
52.212-2
Evaluation—Commercial Products and Commercial Services
52.212-4
Contract Terms and Conditions—Commercial Products and Commercial Services
52.219-6
Notice of Total Small Business Set-Aside
52.219-28
Post-Award Small Business Program Representation
52.222-3
Convict Labor
52.222-19
Child Labor—Cooperation with Authorities and Remedies
52.222-36
Equal Opportunity for Workers with Disabilities
52.222-50
Combating Trafficking in Persons
52.222-90
Addressing DEI Discrimination by Federal Contractors
52.226-8
Encouraging Contractor Policies to Ban Text Messaging While Driving
52.232-33
Payment by Electronic Funds Transfer—System for Award Management
52.232-39
Unenforceability of Unauthorized Obligations
52.232-40
Providing Accelerated Payments to Small Business Subcontractors
52.233-3
Protest after Award
52.233-4
Applicable Law for Breach of Contract Claim
52.240-90
Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text**
52.240-91
Security Prohibitions and Exclusions **See attached clauses and provisions for full text**
52.240-93
Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text**
52.242-15
Stop-Work Order
52.243-1
Changes—Fixed Price
52.246-1
Contractor Inspection Requirements
52.247-34
F.o.b. Destination
52.252-1
Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text**
52.252-2
Clauses Incorporated by Reference **See attached clauses and provisions for full text**
52.252-5
Authorized Deviations in Provisions **See attached clauses and provisions for full text**
52.252-6
Authorized Deviations in Clauses **See attached clauses and provisions for full text**
DFARS CLAUSES AND PROVISIONS
Clause/Provision
Title
252.203-7000
Requirements Relating to Compensation of Former DoD Officials
252.203-7002
Requirement to Inform Employees of Whistleblower Rights
252.203-7005
Representation Relating to Compensation of Former DoD Officials
252.204-7003
Control of Government Personnel Work Product
252.204-7008
Compliance with Safeguarding Covered Defense Information Controls
252.204-7012
Safeguarding Covered Defense Information and Cyber Incident Reporting
252.204-7015
Notice of Authorized Disclosure of Information for Litigation Support
252.204-7016
Covered Defense Telecommunications Equipment or Services--Representation
252.204-7017
Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation
252.204-7018
Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services
252.240-7997
NIST SP 800-171 DoD Assessment Requirements.
252.204-7021
Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement
252.204-7022
Expediting Contract Closeout
252.204-7024
Notice on the use of the Supplier Performance Risk System
252.204-7025
Notice of Cybersecurity Maturity Model Certification Level Requirements
252.215-7013
Supplies and Services Provided by Nontraditional Defense Contractors
252.223-7008
Prohibition of Hexavalent Chromium
252.225-7000
Buy American--Balance of Payments Program Certificate—Basic
252.225-7001
Buy American and Balance of Payments Program—Basic
252.225-7002
Qualifying Country Sources as Subcontractors
252.225-7012
Preference for Certain Domestic Commodities
252.225-7048
Export-Controlled Items
252.225-7059
Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation
252.225-7060
Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.232-7003
Electronic Submission of Payment Requests and Receiving Reports
252.232-7006
Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text**
252.232-7010
Levies on Contract Payments
252.243-7001
Pricing of Contract Modifications
252.244-7000
Subcontracts for Commercial Products or Commercial Services
252.247-7023
Transportation of Supplies by Sea--Basic
5452.233-9001
Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text**
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)
C04 Unused Former Government Surplus Property (SEP 2021)
C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020)
C20 Vendor Shipment Module (VSM) (MAY 2026)
E05 Product Verification Testing (MAY 2020)
H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024)
H18 Defense Priorities and Allocations System (DPAS) (JUL 2026)
L06 Agency Protests (DEC 2016)
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024)
L09 Reverse Auction (OCT 2016)
L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016)
L31 Additive Manufacturing (JUN 2018)
L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text)
YM3 A1: Additional Information
YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment)
YM3 C500: Mercury Control (Supplies)
YM3 C501: Correction of Certifications
YM3 C506: Qualified Products for Award
YM3 C524: Controlled Industrial Material
YM3 C528: Specification Changes
YM3 C531: Restrictions on K-Monel
YM3 D1: Deteriorative Material Marking
YM3 D2: Marking of Shipments
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery
YM3 D8: Prohibited Packing Materials
YM3 E2: Inspection and Acceptance (Destination)
YM3 E4: Disposition of Nonconforming Material
YM3 E504: Notice of Constructive Acceptance Period
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
YM3 H500: Special Provisions for Threaded Products
YM3 M8: Single Award for All Items (All or none procurements)
This announcement will close 12/01/2026 01:00 PM EST. The Point of Contact for this solicitation is Mihaela Zouak who can be reached at Mihaela.c.zouak.civ@us.navy.mil. All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer the manufacturer’s name, location, and business size must be provided.
Please submit quotes via email to: Mihaela.c.zouak.civ@us.navy.mil, and PNSYSupplyQuotations@us.navy.mil
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
Files
| File | Type | Posted |
|---|---|---|
| Exhibits SPMYM327Q7006.pdf | ||
| RFQ SPMYM327Q7006.pdf | ||
| Clauses - Full Text Provisions and Clauses 11-4-2026.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Screws | Land and Maritime | Total Small Business | |
| Assorted cap screws (cmmc level 1 required) | Land and Maritime | Total Small Business | |
| Socket Head Cap Screws | Land and Maritime | Total Small Business | |
| Screw, cap, hexagon HEA | Land and Maritime | No set-aside | |
| Screw, self-locking | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity