Stratasys 3D Printer Maintenance
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA812525Q0043
- Agency
- Air Force Sustainment Center Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Tinker AFB, Oklahoma, United States
- Points of contact
-
- Linsey Laird linsey.laird@us.af.mil (405) 739-5117
- Jason Shirazi jason.shirazi@us.af.mil (405) 739-5194
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center is soliciting quotes for the "Emerald Care" Annual System Maintenance for six Stratasys 3D Printers located at Tinker Air Force Base in Oklahoma City. The solicitation (FA812525Q0043) requires a vendor to provide preventive maintenance for three Stratasys Fortus F900 and three Stratasys Fortus 450mc 3D Printers, with a specific focus on comprehensive service coverage. Technicians performing maintenance must be Stratasys OEM certified, and vendors must submit a detailed written statement explaining how they will meet the technical evaluation criteria outlined in FAR Clause 52.212-2. The contract will be awarded on a firm-fixed-price basis to one vendor based on technical acceptability and lowest total evaluated price. Key dates include a quote submission deadline of March 13, 2025, with any questions required to be submitted in writing two days prior to the closing date.
The solicitation is an unrestricted acquisition under FAR Part 12 commercial item procedures, with no specific set-aside designations. The maintenance contract includes one preventive maintenance visit per printer annually, comprehensive phone support during business hours, and a 3-day response time for on-site service visits. The service plan will cover hardware and software updates, priority scheduling, and includes a 16% discount on parts and training benefits. The contract term includes a base period with potential option periods, and all work will be performed at Tinker Air Force Base, Oklahoma. Contractors must comply with Air Force installation access requirements, including REAL ID Act regulations effective May 3, 2023, and must be registered in the System for Award Management (SAM). The total value of the contract is not explicitly stated, but it encompasses maintenance services for six specific 3D printers with serial numbers documented in the equipment list.
Notice text
2 versions
Update #2 · Latest ·
This solicitation has been amended to replace the Performance Work Statement.
This is a solicitation notice for the purchase of the "Emerald Care" Annual System Maintenance for six (6) Stratasys Fortus 3D Printers in accordance with the Performance Work Statement. FOB Destination is Tinker AFB OK.
Any questions related to this Solicitation need to be submitted in writing two (2) days prior to the closing date stated on page 1 of the Solicitation.
Quotes will be accepted on or before the closing date stated on page 1 of the solicitation.
When returning this Standard form 1449, please complete the following:
1. Please complete Company Information (Name & Address) and CAGE Code in Block 17a.
2. Please wet sign, put the name and title of signer, and date signed in blocks 30a., 30b., and 30c. respectively.
3. Please insert pricing on Pages 3-13 along with net amount.
4. Please complete information in all “Fill-in” provisions and clauses, especially:
a. FAR 52.212-3 (when applicable)
5. Please provide a written statement to explain how your company is going to meet the technical evaluation criteria listed in FAR Clause 52.212-2.
Update #1 ·
This is a solicitation notice for the purchase of the "Emerald Care" Annual System Maintenance for six (6) Stratasys Fortus 3D Printers in accordance with the Performance Work Statement. FOB Destination is Tinker AFB OK.
Any questions related to this Solicitation need to be submitted in writing two (2) days prior to the closing date stated on page 1 of the Solicitation.
Quotes will be accepted on or before the closing date stated on page 1 of the solicitation.
When returning this Standard form 1449, please complete the following:
1. Please complete Company Information (Name & Address) and CAGE Code in Block 17a.
2. Please wet sign, put the name and title of signer, and date signed in blocks 30a., 30b., and 30c. respectively.
3. Please insert pricing on Pages 3-13 along with net amount.
4. Please complete information in all “Fill-in” provisions and clauses, especially:
a. FAR 52.212-3 (when applicable)
5. Please provide a written statement to explain how your company is going to meet the technical evaluation criteria listed in FAR Clause 52.212-2.
Attachments
| File | Type | Posted |
|---|---|---|
| PWS_3D Printers Maintenance_Rev1_Redacted.pdf | ||
| Solicitation Amendment FA812525Q00430001 SF 30.pdf | ||
| Appendix A - Equipment List.pdf | ||
| Appendix C - Contract Safety.pdf | ||
| Wage Determination No. 2015-5315 Rev. 25_23Dec24.pdf | ||
| Solicitation - FA812525Q0043.pdf | ||
| Attachment 1_Stratasys Direct Service Plans.pdf | ||
| PWS_3D Printers Maintenance_Redacted.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Stratasys 3D Printer Maintenance | Award Notice | |
| Stratasys 3D Printer Maintenance | Solicitation | |
| Stratasys 3D Printer Maintenance | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity