Sterndrive replacement
Open Solicitation Posted
- Solicitation number
- 52000PR270001125
- Agency
- Not on record
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- Place of performance
- Honolulu, Hawaii 96819, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard SFLC seeks sterndrive replacement services on the USCGC JUNIPER (WLB 201) through a Total Small Business set-aside combined synopsis/solicitation (RFQ 52000PR270001125), with quotes due November 25, 2026. The procurement is a firm-fixed-price purchase order under PSC J020 and NAICS 336611.
Work is performed at USCGC JUNIPER in Honolulu, Hawaii (96819), with all work completed and the vessel ready for use no later than December 7, 2026. The contractor provides a Certified Mercury Technician, all required miscellaneous gaskets, and the equipment, tools, and facilities needed to remove and replace the transom assembly, gimbal bearing, sterndrive assembly, propeller, and exhaust bellows per Mercury service manuals and alignment procedures. The contractor also troubleshoots excessive steering play, with steering casualty parts determined after a deeper inspection. The Coast Guard furnishes the sterndrive (NSN 3040-01-661-0628), transom assembly, O-ring couplers and gimbals, gimbal bearing, bellows, seal, and propeller.
The contractor organizes Condition Found Reports as needed, conducts underway sea trials with a Coast Guard representative, and notifies the COR of the intended start date immediately after award. Work commences by an agreed-upon date following 2026 award. On completion, the contractor arranges inspection and acceptance with the Unit POC and removes all hazardous waste, trash, and debris from the site.
Quotes are evaluated on technical capability, past performance, and fair and reasonable pricing. The notice states no factor weighting. Submit quotes by email to Joshua.C.Richardson2@uscg.mil with the solicitation number in the subject line. Invoicing runs through the Invoice Processing Platform (www.ipp.gov). Points of contact are COR Robert Shinagawa, Secondary Unit POC MKC Jose Sanchez, and Contracting Officer Joshua Richardson.
Notice text
Combined Synopsis/Solicitation — USCGC JUNIPER (WLB 201)
Solicitation Number: 52000PR270001125 (Request for Quote — RFQ) | PSC: J020 | NAICS: 336611
Table of Contents
Right-click and select ‘Update Field’ to populate the table of contents.
Combined Synopsis/Solicitation for Commercial Services
Solicitation Field
Details
Solicitation Number
52000PR270001125 (Request for Quote — RFQ)
PSC / NAICS
PSC: J020 | NAICS: 336611
Agency
U.S. Coast Guard SFLC
Contract Type
Firm Fixed Price Purchase Order
Set-Aside Information
100% Small Business Set-Aside
This is a combined synopsis/solicitation for commercial services, prepared in accordance with the format in subpart 12.6 of the Federal Acquisition Regulation (FAR), and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through the latest Federal Acquisition Circular (FAC). It is anticipated that a competitive, firm-fixed-price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
Evaluation Criteria
Quotes will be evaluated based on the following factors:
- Technical Capability: The offeror’s ability to perform the services described in the Performance Work Statement.
- Past Performance: The offeror’s record of relevant and recent past performance.
- Price: Fair and reasonable pricing.
Point of Contact for Questions
For any questions regarding this solicitation, please contact:
Role
Name
Phone
COR
Robert Shinagawa
—
Robert.s.shinagawa@uscg.mil
Technical Questions (Secondary Unit POC / COR)
MKC Jose Sanchez
—
Jose.V.Sanchez@uscg.mil
Contracting Actions (Contracting Officer)
Joshua Richardson
—
Joshua.C.Richardson2@uscg.mil
Submission of Quotes
Quotes must be submitted via email to Joshua.C.Richardson2@uscg.mil. The subject line of the email must include the solicitation number: 52000PR270001125.
Performance Work Statement (PWS) / Statement of Work (SOW)
1. Scope of Work
The Contractor shall provide a Certified Mercury Technician, all required parts listed below, equipment, tools, and facilities to replace the transom assembly, gimbal bearing, sterndrive assembly, propeller, and exhaust bellows. The Contractor shall also troubleshoot and correct any excessive play in the steering system. Parts for steering casualty are TBD until a deeper inspection can be performed.
2. Specific Tasks
Physical Characteristics of Vessel
Characteristic
Measurement
Hull Length
24′ 6″
Length Overall on Trailer
31′ 10″
Beam Overall
7′ 11″
Highest Points (Fixed on Trailer)
12′ 0″
Required Parts from Contractor
- Misc. Gaskets if required in accordance with Mercury Service Manual
Required Parts Provided by Coast Guard
Component
NSN / Reference
Part Number
Qty
Sterndrive
3040-01-661-0628
5237300TP (B1X 1.65:1 Drive)
1
Transom Assembly
—
62000025P
1
O-Ring Coupler
015016327
25-35027
3
O-Ring Gimbal
015016329
25-29845
2
Gimbal Bearing
015018673
879194A01
1
Bellows
015018391
8M0062406
1
Seal
011251078
26-88416
1
Prop
015771672
48-19838A46
1
Mercury Bravo 1 Sterndrive Replacement Tasks
- Task 1: Certified Mercury technicians shall remove and replace the transom assembly, sterndrive, gimbal bearing, bellows, and all required/damaged/worn O-rings/seals/components in accordance with the Mercury parts breakdown, service manual, and alignment procedures for the B1X 1.65:1 sterndrive.
- Task 2: Certified Mercury technician shall install replacement propeller and all worn/damaged components in accordance with Mercury parts breakdown and service manual for propeller PN: 48-1938A46.
- Task 3: Certified Mercury technician shall adjust steering in accordance with Mercury service and Steyr Manual for proper operation.
- Task 4: Technicians shall diagnose and provide additional estimates for replacement parts or additional repairs for the Condition Found Report (CFR) if required.
- Task 5: Technician shall verify proper operation of steering and all sterndrive components once replacement and repairs are complete, to include underway sea trials with a representative from the Coast Guard. Contractor shall organize and provide CFRs as needed.
Additional Contract Requirements
- Conditions Affecting the Work: If additional work items are found, the contractor shall report findings immediately before work continues via CFR along with a commercial estimate of necessary work to be completed outside the original scope.
- After Award of the Contract: The contractor must immediately notify the Contracting Officer’s Representative (COR) of the intended start date. The work shall be done in accordance with the specification.
- Oral Modification: No oral statement of any person other than the Contracting Officer shall, in any manner or degree, modify or otherwise affect the terms of this contract.
- Workmanship: All work shall be accomplished with a Certified Mercury Technician and shall be satisfactory to the Contracting Officer Representative (COR) / CG on-site representative.
- Permits: The contractor shall, without additional expense to the government, obtain all appointments, licenses, and permits required for the prosecution of the work. The contractor shall comply with all applicable federal, state, and local laws.
- Clean Up: All HAZWASTE, trash, and debris shall be removed from the site and/or recycled as applicable. The job site shall be left in a clean and neat manner.
3. Deliverables
- Report/Service Completion: The contractor shall organize and provide Condition Found Reports (CFRs) as needed, conduct underway sea trials with a Coast Guard representative to verify proper operation, and contact the Unit POC upon completion of work to arrange for inspection/acceptance.
- Due Date: All services must be completed and the vessel ready for use NO LATER THAN December 7, 2026.
4. Place of Performance
Services shall be performed at:
Commanding Officer
USCGC JUNIPER (WLB 201)
400 Sand Island PKWY.
Honolulu, HI 96819
PH: (808) 842-2865
5. Period of Performance
Upon acceptance, the contractor shall commence work by an agreed-upon date established after the award has been issued contractor will work diligently to complete the entire project.
Invoicing
Invoicing in IPP: It is a mandatory requirement that all invoicing for Purchase Orders be entered and processed through the Invoice Processing Platform (IPP) at www.ipp.gov.
FAR Clauses
This order is subject to, but is not limited to, the following Federal Acquisition Regulations:
- 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.
- 52.204-26 Covered Telecommunications Equipment or Services—Representation.
- 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.
- 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.
- 52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services.
- 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
- 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.
- 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
Service-Specific Clauses
- 52.222-41 Service Contract Labor Standards (formerly Service Contract Act). (Required for service contracts over $2,500).
- 52.222-42 Statement of Equivalent Rates for Federal Hires.
- 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (Multiple Year and Option Contracts).
- 52.237-2 Protection of Government Buildings, Equipment, and Vegetation.
Small Business Specific Clauses
- 52.219-6 Notice of Total Small Business Set-Aside
- 52.219-8 Utilization of Small Business Concerns
- 52.219-9 Small Business Subcontracting Plan (Required for contracts > $750,000, or $1.5M for construction)
- 52.219-14 Limitations on Subcontracting
- 52.219-28 Post-Award Small Business Program Rerepresentation
- 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards
- 52.222-35/36/37 Equal Opportunity and related clauses
Notice to Subcontractors: To ensure an equitable, transparent, and streamlined procurement process, the Government will only address inquiries submitted directly by prospective prime contractors. The Government will not respond to questions or requests for clarification from subcontractors regarding this solicitation or the Statement of Work (SOW) / Performance Work Statement (PWS). All prospective subcontractors must coordinate directly with their respective prime offerors.
Files
| File | Type | Posted |
|---|---|---|
| Solicitation 52000PR270001125.docx | DOCX document | |
| SOW CGC JUNIPER Sterndrive Replacment UPDATED 29OCT26.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| USCGC sturgeon (WPB-(87336) DS FY27 | Coast Guard | Total Small Business | |
| Open, inspect, report and overhaul of hub, port | — | Total Small Business | |
| CGC OAK dockside repairs | — | Total Small Business | |
| Dock-side (DS): USCGC WAESCHE Quarter 2 FY27 Repair | — | Total Small Business | |
| open inspect and report PUMP, COOLING, SALT WATER | — | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity