Sound Isolation Booth

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. All responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Contract will be evaluated on Low Price Technically Acceptable (LPTA).

NAMRU-Dayton requests Sound Isolation Booths, 8' x 24' x 7' 2" divided into three (3) 8'x8' rooms. This requirement is needed to sound proof the Sleep Lab used for cognitive testing and sleep studies. Currently, the Sleep Lab is located next to the Disorientation Research Device (DRD), where flight simulation studies are being performed. The DRD is fairly loud and affecting the ability of the participants participating in the Sleep Studies ability to sleep.

The requirements for the booth are as follows:

•Sound Isolation Booth, 8' x 24' x 7' 2" *Divided into three (3) 8'x8' rooms*

•Exterior: PREMIUM CHARCOAL Acoustic Fabric

•Interior: Acoustic Foam Wrapped w/ PREMIUM CHARCOAL Acoustic Fabric

•Flooring: Gym-Style flooring

•Qty 3, Dimmable LED 'Cove' Lighting; w/ remote control

•Qty 6, Built In Ventilation System / Twelve (12) - Fan Kits @ 60 CFM each -- 2 per room

•Qty 10, 2" Cable Passage Tubes -- 4 per room

•Qty 3, Acoustic Door, 36" x 76"

•Qty 3, Window (tinted), 1' x 2' installed in Doors

•Qty 2, Window (tinted), 3'x2' installed in dividing walls

•Qty 24, Mounting blocks w/ nut inserts for bracket/framing; 4 total corner brackets per room

•Qty 4, Jack Panel - Includes: 3 mm headphone jack, (2) USB 3.0, HDMI, 9 pin serial port, 15 pin monitor port

•Exclusive Compression Door Seal System with Cam Door Closure

•Electrical and RF energy transmission shielding, mitigate by 3 order of magnitude, if possible, 2.4 and 5 GHz wireless network RF signals with max signal strength (in the fatigue lab) of 320 mV/m (alternatively 266 microwatts/m^2). That is reduce these signals to 0.3mV/m of less if possible.

•8' x 24' Ortho 2 Mat w/ NO BEVEL

•Certified UL fire rated material

All items will be shipped to Wright Patterson AFB, Ohio 45433. The quote should include all applicable shipping and handling costs. As NAMRU-D is a Government facility, no sales tax will be paid. All quotes must include the Company Name, Full Address, CAGE Code and Point of Contact information including Name, Phone Number and E-Mail address. All invoices for this standing order will be submitted electronically through Wide Area Work Flow (WAWF) - Invoicing Receipt Acceptance Property Transfer (iRAPT).

.