Sound_Booth_Specs_and_diagram.doc

NAMRU-Dayton Sound Booth Specifications

The requirements for the booth are as follows:

· Sound Isolation Booth, 8' x 24' x 7' 2" *Divided into three (3) 8'x8' rooms*

· Exterior: PREMIUM CHARCOAL Acoustic Fabric

· Interior: Acoustic Foam Wrapped w/ PREMIUM CHARCOAL Acoustic Fabric

· Flooring: Gym-Style flooring

· Qty 3, Dimmable LED 'Cove' Lighting; w/ remote control

· Qty 6, Built In Ventilation System / Twelve (12) - Fan Kits @ 60 CFM each -- 2 per room

· Qty 10, 2" Cable Passage Tubes -- 4 per room

· Qty 3, Acoustic Door, 36" x 76"

· Qty 3, Window (tinted), 1' x 2' installed in Doors

· Qty 2, Window (tinted), 3'x2' installed in dividing walls

· Qty 24, Mounting blocks w/ nut inserts for bracket/framing; 4 total corner brackets per room

· Qty 4, Jack Panel - Includes: 3 mm headphone jack, (2) USB 3.0, HDMI, 9 pin serial port, 15 pin monitor port

· Exclusive Compression Door Seal System with Cam Door Closure

· Electrical and RF energy transmission shielding, mitigate by 3 order of magnitude, if possible, 2.4 and 5 GHz wireless network RF signals with max signal strength (in the fatigue lab) of 320 mV/m (alternatively 266 microwatts/m^2). That is reduce these signals to 0.3mV/m of less if possible.

· 8' x 24' Ortho 2 Mat w/ NO BEVEL

· Certified UL fire rated materials A diagram of the type of booths desired is below:

FY ‘17