Sole Source - Support, Updates & Preventative Maintenance CCTV Contract
Closed Pre-Solicitation Posted
Not the latest version. See the latest solicitation from .
- Solicitation number
- NNSY-1120-0006
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 561621 Security Systems Services (except Locksmiths)
- Place of performance
- Portsmouth, Virginia 23709, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Sea Systems Command, acting through Norfolk Naval Shipyard (NNSY), intends to award a sole source Firm Fixed Price contract for twelve months of preventative maintenance, support, and updates for a new Milestone video management system and associated cameras throughout the facility. The contractor must be a Milestone Certified Partner with proven expertise in CCTV system deployment, integration, and maintenance, including certified integration technicians, design engineers, and integration engineers. Key requirements include providing telephonic support within one hour, on-site and hardware support within four hours (two hours during reactor servicing), and defect corrections within eight hours. The contractor must maintain ISO 9001:2008 registration, possess Secret-level security clearance capability, and ensure all personnel undergo a National Agency Check for trustworthiness. The pre-solicitation notice was posted on January 8, 2026, with a closing date of January 14, 2026, reflecting the government's intent to proceed rapidly with this acquisition.
This procurement carries no set-aside designations and is being pursued as a sole source acquisition under Federal Acquisition Regulation 13.106-1(b)(1)(i) based on exclusive licensing agreements and the identification of only one responsible source. The incumbent contractor is UT GOVERNMENT doing business as Integrated Security Technologies, Inc. (CAGE Code: 4ZXN5), who currently provides maintenance services for the shipyard's Tyco Software House Ccure9000 Physical Access Control System and serves as NNSY's certified Tyco integrator. The procurement is classified under NAICS code 561621 (Security Systems Services) and PSC code J063 (Maintenance/Repair/Rebuild of Alarm, Signal, and Security Detection Systems), and is expected to fall below the simplified acquisition threshold. The contract duration is twelve months, with the government's justification emphasizing continuity of services, regulatory compliance with NAVSEAINST 5510.2D and OPNAVINST 5530.14E, and the maintenance of physical security system integrity at this critical naval facility.
Notice text
2 versions
Update #2 · Latest ·
NOTICE OF INTENT TO SOLE SOURCE.
This synopsis is hereby issued in accordance with FAR 5.20. This requirement is for commercial items/services as defined in FAR 2.101 and will be prepared in accordance with the information in FAR Part 12 and FAR Part 13, as supplemented with the additional information included in this notice.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source UT GOVERNMENT doing business as INTEGRATED SECURITY TECHNOLOGIES, INC (CAGE Code: 4ZXN5) under the authority of FAR 13.106-1(b)(1)(i) and FAR 6.302-1: Only one responsible source has been identified as reasonably available to provide the supplies and/or services that will satisfy the Agency requirements.
FAR 13.106-1(b)(1)(i) states for purchases not exceeding the simplified acquisition threshold, Contracting Officers may solicit from one source if the Contracting Officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand-name or industrial mobilization).
As required by FAR 13.106-3(b)(3)(i), this memorandum explains the absence of competition for this acquisition, as only one source will be solicited for this requirement (or for a portion of the requirement) and the requirement is not expected to exceed the simplified acquisition threshold.
The applicable North American Industry Classification System (NAICS) code for this procurement is 561621. The Product Service Code (PSC) assigned to this requirement is J063.
Norfolk Naval Shipyard’s (NNSY) intends to solicit, negotiate, and award a sole source Firm Fixed Price (FFP) Contract to UT GOVERNMENT doing business as INTEGRATED SECURITY TECHNOLOGIES, INC (CAGE Code: 4ZXN5) to provide twelve (12) months of preventative maintenance services for the new Milestone video management system and cameras being installed throughout the NNSY. The contractor will provide the required services in the form of repair, preventative maintenance and updates, including the following services: telephonic support, on-site support, hardware/software support, defect correctable support, preventative maintenance/inspection support, system/application administration and update support, documentation update support and operator/admin refresher training.
SEE STATEMENT OF WORK (Section 6 & Section 7) for additional information about the NNSY’s request for contractor- provided services and supplies.
NNSY’s Physical Access Control System (PACS) will interface with the Milestone XProtect Professional+ Closed Circuit Television (CCTV) system, which will require contractor maintenance for repair and sustainment of the system and the physical cameras themselves.
Unlimited Technologies Government (UTG) is NNSY’s certified Tyco integrator; UTG currently performs maintenance under an existing contract associated with NNSY’s Tyco Software House Ccure9000 PACS. NAVSEAINST 5510.2D and OPNAVINST 5530.14E require PACS to meet FIPS-201 guidelines ensuring credential (CAC) validation.
NNSY’s current PACS is in alignment with these regulations. Not purchasing camera maintenance services through UTG will limit our contracted maintenance program, and creates an additional vulnerability to NNSY’s Physical Security posture, and is necessary for continuity of services.
NNSY must maintain continuity of services, and the process of introducing a new vendor threatens to interrupt these services, duplicating existing costs, and will cause unacceptable delays to the shipyard’s mission.
Given the market research information provided above, the Contracting Officer recommends issuing the contract on a sole source basis to UT GOVERNMENT (doing business as INTEGRATED SECURITY TECHNOLOGIES, INC), which is a large business under the selected NAICS code.
This notice is not a request for competitive proposals; however, any responsible source believing that it can fulfill the requirements may identify their interest and capabilities in response to this synopsis, and must clearly show the firm’s ability provide twelve (12) months of preventative maintenance services and supplies for the NNSY closed-circuit television system (CCTV), in the form of repair, preventative maintenance and updates.
Interested persons may identify their interest and capability to respond to the requirement or submit a capability statement. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based on the responses to this notice is solely within the discretion of the Government. All capability statements received by the closing response date will be considered by the Government. The Government will not pay for any information that is received.
Capability statements, comments or questions regarding this notice shall be submitted via EMAIL ONLY to the Contract Specialist, Audrey Franklin (audrey.m.franklin2.civ@us.navy.mil ) by January 14th, 2026 at 11:45 AM EDT. The capability statement shall be no more than five (5) 8.5 x 11 inch pages with font no smaller than 12 point font, 1.5 spaced. It shall demonstrate the company’s ability to provide the supplies or services listed in the required capabilities described herein. Documentation should be in bullet format. All responses shall include:
- Company Name,
- CAGE code,
- Company Address,
- Company Business Size, and
- Points-of-Contact (POC) including name, phone number, fax number and email address.
THE SOLICITATION IS NOT YET AVAILABLE. Once available, the solicitation will be posted on www.sam.gov.
The solicitation is expected to be available on or around January 16th, 2026. Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available in electronic form.
Update #1 ·
NOTICE OF INTENT TO SOLE SOURCE.
This synopsis is hereby issued in accordance with FAR 5.20. This requirement is for commercial items/services as defined in FAR 2.101 and will be prepared in accordance with the information in FAR Part 12 and FAR Part 13, as supplemented with the additional information included in this notice.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source UT GOVERNMENT doing business as INTEGRATED SECURITY TECHNOLOGIES, INC (CAGE Code: 4ZXN5) under the authority of FAR 13.106-1(b)(1)(i) and FAR 6.302-1: Only one responsible source has been identified as reasonably available to provide the supplies and/or services that will satisfy the Agency requirements.
FAR 13.106-1(b)(1)(i) states for purchases not exceeding the simplified acquisition threshold, Contracting Officers may solicit from one source if the Contracting Officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand-name or industrial mobilization).
As required by FAR 13.106-3(b)(3)(i), this memorandum explains the absence of competition for this acquisition, as only one source will be solicited for this requirement (or for a portion of the requirement) and the requirement is not expected to exceed the simplified acquisition threshold.
The applicable North American Industry Classification System (NAICS) code for this procurement is 561621. The Product Service Code (PSC) assigned to this requirement is J063.
Norfolk Naval Shipyard’s (NNSY) intends to solicit, negotiate, and award a sole source Firm Fixed Price (FFP) Contract to UT GOVERNMENT doing business as INTEGRATED SECURITY TECHNOLOGIES, INC (CAGE Code: 4ZXN5) to provide twelve (12) months of preventative maintenance services for the new Milestone video management system and cameras being installed throughout the NNSY. The contractor will provide the required services in the form of repair, preventative maintenance and updates, including the following services: telephonic support, on-site support, hardware/software support, defect correctable support, preventative maintenance/inspection support, system/application administration and update support, documentation update support and operator/admin refresher training.
SEE STATEMENT OF WORK (Section 6 & Section 7) for additional information about the NNSY’s request for contractor- provided services and supplies.
Based on market research conducted, UT GOVERNMENT (doing business as INTEGRATED SECURITY TECHNOLOGIES, INC) owns propriety rights to technical data, in relation to the maintenance and repair of the Software House CCure 9000 Automated Access Control System (AACS) installed at Norfolk Naval Shipyard. NNSY’s Physical Access Control System (PACS) will interface with the Milestone XProtect Professional+ Closed Circuit Television (CCTV) system, which will require contractor maintenance for repair and sustainment of the system and the physical cameras themselves.
Use of other vendors could result in unforeseen delays in maintenance/repair, which could lead to security access risks for the shipyard. Not purchasing camera maintenance services through UTG will limit our contracted maintenance program and creates an additional vulnerability to NNSY’s Physical Security posture. Given the information provided above, the Contracting Officer recommends issuing the contract on a sole source basis to UT GOVERNMENT (doing business as INTEGRATED SECURITY TECHNOLOGIES, INC), which is a large business under the selected NAICS code.
SEE STATEMENT OF WORK (Section 6 & Section 7) for additional information about the NNSY’s request for contractor-provided services and supplies.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source UT GOVERNMENT doing business as INTEGRATED SECURITY TECHNOLOGIES, INC (CAGE Code: 4ZXN5) under the authority of FAR 13.106-1(b)(1)(i) and FAR 6.302-1: Only one responsible source has been identified as reasonably available to provide the supplies and/or services that will satisfy the Agency requirements.
This notice is not a request for competitive proposals; however, any responsible source believing that it can fulfill the requirements may identify their interest and capabilities in response to this synopsis, and must clearly show the firm’s ability provide twelve (12) months of preventative maintenance services and supplies for the NNSY closed-circuit television system (CCTV), in the form of repair, preventative maintenance and updates.
Interested persons may identify their interest and capability to respond to the requirement or submit a capability statement. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based on the responses to this notice is solely within the discretion of the Government. All capability statements received by the closing response date will be considered by the Government. The Government will not pay for any information that is received.
Capability statements, comments or questions regarding this notice shall be submitted via EMAIL ONLY to the Contract Specialist, Audrey Franklin (audrey.m.franklin2.civ@us.navy.mil ) by January 14th, 2026 at 11:45 AM EDT. The capability statement shall be no more than five (5) 8.5 x 11 inch pages with font no smaller than 12 point font, 1.5 spaced. It shall demonstrate the company’s ability to provide the supplies or services listed in the required capabilities described herein. Documentation should be in bullet format. All responses shall include:
- Company Name,
- CAGE code,
- Company Address,
- Company Business Size, and
- Points-of-Contact (POC) including name, phone number, fax number and email address.
THE SOLICITATION IS NOT YET AVAILABLE. Once available, the solicitation will be posted on www.sam.gov.
The solicitation is expected to be available on or around January 16th, 2026. Potential vendors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available in electronic form.
Files
| File | Type | Posted |
|---|---|---|
| Redacted Signed MemoFinal_Redacted.pdf | ||
| STATEMENT OF WORK - CCTV draft.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Sole Source - Support, Updates & Preventative Maintenance CCTV Solicitation | Solicitation | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Notice of intent to award a sole source | Naval Supply Systems Command | No set-aside | |
| W9124G26CBARRACKS | MICC Fort Eustis | Total Small Business | |
| Yuma VMS modernization | Military Sealift Command | No set-aside | |
| Intent to Sole Source Preventive Maintenance (PM) X5000 Computed Tomography X-Ray System | Naval Air Systems Command | No set-aside | |
| Notice of Intent for Brand Name for Maintenance and Support for HUGS Patient Security System | Defense Health Agency | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity