Socket flat head self-locking cap screws
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- SPMYM326Q6041
- Agency
-
Land and Maritime
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332722 Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- PSC
- 5305 Screws
- Place of performance
- Kittery, Maine 03904, United States
- Points of contact
-
- Jannell Moriarty jannell.moriarty@dla.mil (207) 438-6395
- Dla-Kme Email Box dla-kme-quotations@dla.mil
Notice details come from SAM.gov. Updated .
About this opportunity
The Defense Logistics Agency Land and Maritime, on behalf of Portsmouth Naval Shipyard, is soliciting quotations for socket flat head self-locking cap screws conforming to specification FF-S-86J(MOD) Type IV, measuring 1/2-13UNC-2A x 2-1/8" long. The procurement is being conducted under simplified acquisition procedures using FAR Parts 12 and 13 for commercial items, with this combined synopsis/solicitation serving as the only solicitation document. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis, with vendor responsibility determined through the PPIRS system in accordance with FAR 9.104. Quotations are due by April 15, 2026, at 2:00 PM EST, and the government requires delivery by April 30, 2026. Offerors must submit descriptive literature demonstrating compliance with specifications, and non-manufacturers must provide proof of traceability; failure to provide required documentation may result in technical unacceptability.
This procurement is designated as a 100% Small Business Set-Aside with a size standard of 600 employees, making it available only to qualified small businesses in the Bolt, Nut, Screw, Rivet, and Washer Manufacturing sector (NAICS 332722). The requirement is for 250 units of the specified socket flat head self-locking cap screws with delivery on a FOB Destination basis to Portsmouth Naval Shipyard in Kittery, Maine. No incumbent contractors or budget ceiling is identified in the solicitation documentation. Quotations must include delivered pricing with shipping and freight costs clearly identified, and vendors must be registered and active in SAM with appropriate small business certifications. Payment will be made via Government Purchase Card or Wide Area Workflow on Net 30 terms following inspection acceptance at destination, with final inspection allowing seven days under QA-4 inspection terms.
Notice text
2 versions
Update #2 · Latest ·
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM326Q6041). This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 March 13, 2026, and DFARS Change Notice (20251110). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html.
The FSC Code is (5305) and the NAICS code is (332722). The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% Small Business Set-Aside.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. If you are not the manufacturer, proof of traceability is required to be sent with your quote. Interested parties must fill out the required request for quote found in the Attachment Section. It is titled, “26Q6041 RFQ Required”.
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
ITEM DESCRIPTION QTY U/I
0001 SOCKET FLAT HEAD S/L CAP SCREW 250 EA
SOCKET FLAT HEAD SELF-LOCKING CAP SCREWS, 1/2-13UNC-2A X 2-1/8” LONG FF-S-86J(MOD) TY-IV. MATERIAL REQUIRED TO BE NICUAL QQ-N-286G GRADE-500 ANNEALED & AGE HARDENED. SELF-LOCKING IAW MIL-DTL-18240F(1) TY-L OR TY-P.
NOTE: MOD TO FF-S-86J IS THE ADDITION OF A “LOT NO.” IS REQUIRED TO BE MARKED ON THE HEADS OF ALL FASTENERS.
0002 DATA REQUIREMENTS 1 EA
A001 EXHIBIT A, SEQ A001
SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE).
A002 EXHIBIT A, SEQ A002
SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-82386 (CERTIFICATION / DATA REPORT).
NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH
THEIR OFFER.
FAR CLAUSES AND PROVISIONS
52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7, System for Award Maintenance
52.204-9, Personal Identity Verification of Contractor Personnel
52.204-10
Reporting Executive Compensation
52.204-13, SAM Maintenance
52.204-19, Incorporation by Reference of Representations and Certifications
52.209-6
Protecting the Government's Interest
52.209-10, Prohibition on Contracting with Inverted Domestic Corporations
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.212-1, Instructions to Offerors - Commercial Products and Commercial Services
52.212-4, Contract Terms and Conditions – Commercial Items
52.219-1 Alt 1 Small Business Program Representations
52.219-6
Notice of Total Small Business Set-Aside
52.219-28
Post-Award Small Business Program Representation
52.222-3
Convict Labor
52.222-19
Child Labor
52.222-50
Combating Trafficking in Persons
52.223-11
Ozone Depleting Substances
52.225-1
Buy American-Supplies
52.225-13
Restriction on Certain Foreign Purchases
52.226-8
Encouraging Contractor Policies to Ban Text Messaging While Driving
52.232-33
Payment by EFT-SAM
52.232-36
Payment by Third Party
52.232-39, Unenforceability of Unauthorized Obligations
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-2 Service of Protest
52.233-3, Protest After Award
52.233-4, Applicable Law for Breach of Contract Claim
52.240-90 Security Prohibitions and Exclusions Representations and Certifications (See Attachment)
52.240-91 Security Prohibitions and Exclusions. (See Attachment)
52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (See Attachment)
52.242-13 Bankruptcy
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.247-64
Preference for Privately Owned US-Flag Commercial Vessels
52.252-1 Solicitation Provisions Incorporated by Reference
52.252-2 Clauses Incorporated by Reference
52.253-1, Computer Generated Forms
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD Officials
252.204-7003. Control of Government Personnel Work Product
252.204-7004 Antiterrorism Awareness Training for Contractors.
252.204-7008 Compliance With Safeguarding Covered Defense Information Controls
252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information
252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (May 2024) (Deviation 2024-O0013)
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.204-7016, * See Attachment for this provision.
252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation
252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
252.204-7019, *See Attachment for this provision.
252.204-7020, NIST SP 800-171 DoD Assessment Requirements
252.204-7024 Notice on the Use of the Supplier Performance Risk System
252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability
252.211-7003, Item Unique Identification and Valuation
252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.
252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001 Buy American and Balance of Payments Program
252.225-7002 Qualifying Country Sources as Subcontractors
252.225-7048, Export Controlled Items
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.231-7000, Supplemental Cost Principles.
252.232-7003, Electronic Submission of Payment Requests
252.232-7006, Wide Area Workflow Payment Instructions *See Attachment for Full Text
252.232-7010, Levies on Contract Payments
252.243-7001, Pricing of Contract Modifications
252.243-7002, Requests for Equitable Adjustment
252.244-7000, Subcontracts for Commercial Items
252.247-7023, Transportation of Supplies By Sea
Note: Vendor shall list the country of origin for each line item.
DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)
C04 Unused Former Government Surplus Property (DEC 2016)
C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)
C20 Vendor Shipment Module (VSM) (AUG 2017)
E05 Product Verification Testing (JUN 2018)
G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017)
H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020)
L06 Agency Protests (DEC 2016)
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations
L31 Additive Manufacturing (JUN 2018)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text):
YM3 A1: Additional Information
YM3 A3: Government Purchase Card Method of Payment Additional Info
YM3 C500: Mercury Control (Supplies)
YM3 C501: Correction of Certifications
YM3 C524: Controlled Industrial Material
YM3 C528: Specification Changes
YM3 C531: Restrictions on K-Monel
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery
YM3 D8: Prohibited Packing Materials
YM3 E2: Inspection and Acceptance (Destination)
YM3 E504: Notice of Constructive Acceptance Period
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
YM3 H500: Special Provisions for Threaded Products
YM3 M8: Single Award for All Items
Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.
This announcement will close (4/15/2026 2pm ET). The Point of Contact for this solicitation is (Jannell Moriarty) who can be reached at (jannell.moriarty@dla.mil). All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.
Please submit quotations via email at (jannell.moriarty@dla.mil).
Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, PayPal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
******* END OF COMBINED SYNOPSIS/SOLICITATION ********
Update #1 ·
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is (SPMYM326Q6041). This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 March 13, 2026, and DFARS Change Notice (20251110). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address: https://www.ecfr.gov and https://www.acquisition.gov/content/list-sections-affected and http://www.acq.osd.mil/dpap/dars/change_notices.html.
The FSC Code is (5305) and the NAICS code is (332722). The Small Business Standard is 600 employees. This requirement is being processed utilizing 100% Small Business Set-Aside.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). PPIRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
Offerors are required to submit descriptive literature to show how their quotation meets the required specifications. Failure to provide this information may result in your quotation being determined technically unacceptable. If you are not the manufacturer, proof of traceability is required to be sent with your quote. Interested parties must fill out the required request for quote found in the Attachment Section. It is titled, “26Q6041 RFQ Required”.
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
ITEM DESCRIPTION QTY U/I
0001 SOCKET FLAT HEAD S/L CAP SCREW 250 EA
SOCKET FLAT HEAD SELF-LOCKING CAP SCREWS, 1/2-13UNC-2A X 2-1/8” LONG FF-S-86J(MOD) TY-IV. MATERIAL REQUIRED TO BE NICUAL QQ-N-286G GRADE-500 ANNEALED & AGE HARDENED. SELF-LOCKING IAW MIL-DTL-18240F(1) TY-L OR TY-P.
NOTE: MOD TO FF-S-86J IS THE ADDITION OF A “LOT NO.” IS REQUIRED TO BE MARKED ON THE HEADS OF ALL FASTENERS.
0002 DATA REQUIREMENTS 1 EA
A001 EXHIBIT A, SEQ A001
SEE EXHIBIT “A” SEQ A001: CDRL DI-MISC-81356A (CERTIFICATE OF COMPLIANCE).
A002 EXHIBIT A, SEQ A002
SEE EXHIBIT “A” SEQ A002: CDRL DI-MISC-82386 (CERTIFICATION / DATA REPORT).
NOTE: OFFERORS MUST COMPLETE THE ATTACHED PROVISIONS 252.204-7016, AND 252.204-7019 AND INCLUDE THE COMPLETED PROVISIONS WITH
THEIR OFFER.
FAR CLAUSES AND PROVISIONS
52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements 52.204-7, System for Award Maintenance
52.204-9, Personal Identity Verification of Contractor Personnel
52.204-10
Reporting Executive Compensation
52.204-13, SAM Maintenance
52.204-19, Incorporation by Reference of Representations and Certifications
52.209-6
Protecting the Government's Interest
52.209-10, Prohibition on Contracting with Inverted Domestic Corporations
52.211-14, Notice of Priority Rating
52.211-15, Defense Priority And Allocation Requirements
52.212-1, Instructions to Offerors - Commercial Products and Commercial Services
52.212-4, Contract Terms and Conditions – Commercial Items
52.219-1 Alt 1 Small Business Program Representations (OVER 10K)
52.219-6
Notice of Total Small Business Set-Aside
52.219-28
Post-Award Small Business Program Representation
52.222-3
Convict Labor
52.222-19
Child Labor
52.222-50
Combating Trafficking in Persons
52.223-11
Ozone Depleting Substances
52.225-1
Buy American-Supplies
52.225-13
Restriction on Certain Foreign Purchases
52.226-8
Encouraging Contractor Policies to Ban Text Messaging While Driving
52.232-33
Payment by EFT-SAM
52.232-36
Payment by Third Party
52.232-39, Unenforceability of Unauthorized Obligations
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
52.233-2 Service of Protest
52.233-3, Protest After Award
52.233-4, Applicable Law for Breach of Contract Claim
52.242-13 Bankruptcy
52.242-15 Stop Work Order
52.243-1, Changes Fixed Price
52.246-1, Contractor Inspection Requirements
52.247-34, F.O.B-Destination
52.247-64
Preference for Privately Owned US-Flag Commercial Vessels
52.252-1 Solicitation Provisions Incorporated by Reference
52.252-2 Clauses Incorporated by Reference
52.253-1, Computer Generated Forms
DFARS CLAUSES AND PROVISIONS
252.203-7000 Requirements Relating to Compensation of Former DoD Officials,
252.203-7002, Requirement to Inform Employees of Whistleblower Rights
252.203-7005 Representation Relating to Compensation of Former DoD Officials
252.204-7003. Control of Government Personnel Work Product
252.204-7004 Antiterrorism Awareness Training for Contractors.
252.204-7008 Compliance With Safeguarding Covered Defense Information Controls
252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information
252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (May 2024) (Deviation 2024-O0013)
252.204-7015, Disclosure of Information to Litigation Support Contractors
252.204-7016, * See Attachment for this provision.
252-204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation
252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
252.204-7019, *See Attachment for this provision.
252.204-7020, NIST SP 800-171 DoD Assessment Requirements
252.204-7024 Notice on the Use of the Supplier Performance Risk System
252.209-7999, Representation by Corporations regarding an Unpaid Delinquent Tax Liability
252.211-7003, Item Unique Identification and Valuation
252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.
252.223-7006, Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.
252.223-7008 Prohibition of Hexavalent Chromium
252.225-7001 Buy American and Balance of Payments Program
252.225-7002 Qualifying Country Sources as Subcontractors
252.225-7048, Export Controlled Items
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region - Representation
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.231-7000, Supplemental Cost Principles.
252.232-7003, Electronic Submission of Payment Requests
252.232-7006, Wide Area Workflow Payment Instructions *See Attachment for Full Text
252.232-7010, Levies on Contract Payments
252.243-7001, Pricing of Contract Modifications
252.243-7002, Requests for Equitable Adjustment
252.244-7000, Subcontracts for Commercial Items
252.247-7023, Transportation of Supplies By Sea
Note: Vendor shall list the country of origin for each line item.
DLAD CLAUSES AND PROVISIONS (See Attachment for Full Text)
5452.233-9001, Disputes: Agreement to Use Alternative Disputes Resolution
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (MAR 2023)
C04 Unused Former Government Surplus Property (DEC 2016)
C14 Repackaging or Relabeling to Correct Deficiencies (AUG 2017)
C20 Vendor Shipment Module (VSM) (AUG 2017)
E05 Product Verification Testing (JUN 2018)
G01 Additional Wide Area Workflow (WAWF) Information (AUG 2017)
H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (FEB 2020)
L06 Agency Protests (DEC 2016)
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations
L31 Additive Manufacturing (JUN 2018)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text):
YM3 A1: Additional Information
YM3 A3: Government Purchase Card Method of Payment Additional Info
YM3 C500: Mercury Control (Supplies)
YM3 C501: Correction of Certifications
YM3 C524: Controlled Industrial Material
YM3 C528: Specification Changes
YM3 C531: Restrictions on K-Monel
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery
YM3 D8: Prohibited Packing Materials
YM3 E2: Inspection and Acceptance (Destination)
YM3 E504: Notice of Constructive Acceptance Period
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
YM3 H500: Special Provisions for Threaded Products
YM3 M8: Single Award for All Items
Quoters are reminded to include a completed copy of 52.212-3 and it’s ALT I if not updated in SAM.
This announcement will close (4/15/2026 2pm ET). The Point of Contact for this solicitation is (Jannell Moriarty) who can be reached at (jannell.moriarty@dla.mil). All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer – Manufacturer’s Name, Location, and Business Size must be provided.
Please submit quotations via email at (jannell.moriarty@dla.mil).
Quotes also to: DLA-KME-QUOTATIONS@DLA.MIL
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, PayPal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
******* END OF COMBINED SYNOPSIS/SOLICITATION ********
Files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses 260210.docx | DOCX document | |
| 26Q6041 RFQ Required.docx | DOCX document | |
| Exhibit A.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| 26Q6041 RFQ Required.docx | DOCX document | |
| Exhibit A.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Socket flat head self-locking cap screws | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Screw, cap, socket HD | Naval Supply Systems Command | No set-aside | |
| Screw, cap, socket he | Naval Supply Systems Command | No set-aside | |
| Assorted Hardware | Land and Maritime | Total Small Business | |
| Screw, cap, hexagon h | Naval Supply Systems Command | No set-aside | |
| Screw, cap, socket head | Aviation | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity