Exhibit A.pdf
PDF 284 KB Posted
- Attached to
- SOCKET FLAT HEAD SELF-LOCKING CAP SCREWS
- Solicitation number
- SPMYM326Q6041
About this file
This is a Contract Data Requirements List for Socket Flat Head S/L Cap Screws under contract number 60904021-SPMYM326Q6041. The document specifies two required data items that the contractor must submit with the material delivery.
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, referenced under contract Section C.2 and based on DI-MISC-81356A. Data Item A002 requires submission of Certification Data/Report containing chemical and mechanical certification per DI-MISC-82386, referenced under contract Section C.3. Both data items must be submitted one time with the material and distributed to Code 245 (the requiring office). Each submission must include one final copy and be submitted under a separate shipment number. The certification data for the fasteners must include quantitative test results in units specified by the applicable specification, with evidence of testing using the correct number of specimens and new untested fasteners for wedge tensile and yield strength testing. Additionally, the certification must comply with the contract section on "Marking and Certification requirements for Controlled Industrial Material." Payment and submission procedures are governed by Federal Acquisition Regulation clauses 252.232-7006 and 252.232-7003, or 52.232-36. The document was prepared by Steve Young on March 31, 2026, and approved on April 1, 2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| Clauses - Full Text Provisions and Clauses 260210.docx | DOCX document | |
| 26Q6041 RFQ Required.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| 26Q6041 RFQ Required.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2Z-0490-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
SOCKET FLAT HEAD S/L CAP SCREW
E. CONTRACT/PR NO.
60904021-SPMYM326Q6041
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-82386
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 6 & 8 of DI-MISC-82386 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
STEVE YOUNG Ext: 3207 245.2Z
H. DATE
03/31/2026
I. APPROVED BY 245.2
X
J. DATE
04/01/2026
File details come from the government source that posted it. Updated .