S351 and S354 Dam Gate Seal Assembly Sets
Closed Solicitation Posted
- Solicitation number
- W19EP26QA015
- Agency
-
ENDIST Jacksonville
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 325212 Synthetic Rubber Manufacturing
- PSC
- 5330 Packing And Gasket Materials
- Place of performance
- Florida 33440, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers Jacksonville District seeks five dam gate seal assembly sets (three S351 and two S354) for delivery to Clewiston, Florida, with quotations due July 31, 2026 and questions due July 24. This is an RFQ issued as a combined synopsis/solicitation for commercial items under FAR part 12, with no set-aside.
Place of performance is Clewiston, FL. The S351 sets are rectangular assemblies measuring 20 feet 9-3/4" wide by 8 feet high; the S354 sets measure 24 feet 2" wide by 8 feet 9-5/8" high. Both configurations require molded J-bulb top and side seals with 1-3/4" diameter bulbs and molded flat bottom seals, with 1/16" PTFE cladding on top and side seals at 180 degrees. All seals must feature VOSB molded corners and hot factory vulcanized splicing. Material specifications mandate durometer 60-70, tensile strength 3000 PSI, elongation 450% minimum, modulus 900 PSI at 300%, compression set 30%, water absorption 5%, and all-pass low temperature brittleness testing with no cracks. Seals must be supplied without bolt holes and packaged in protective wooden crates for shipment.
NAICS code is 325212 (Synthetic Rubber Manufacturing); PSC code is 5330 (Packing and Gasket Materials). Award will be made on a Lowest Price Technically Acceptable basis to the responsible offeror whose offer meets minimum technical requirements and provides the lowest evaluated price. Contact Contract Specialist Kelly Koger at kelly.l.koger@usace.army.mil or Contracting Officer Dustin Furrey at dustin.l.furrey@usace.army.mil.
Notice text
Combined Synopsis/Solicitation for Commercial Items
Subject: S351 and S354 Dam Gate Seal Assembly Sets
Solicitation Number: W19EP26QA015
Classification Code: 5330
NAICS Code: 325212
Agency: U.S. Army Corps of Engineers (USACE), Jacksonville District
1. Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a separate written solicitation will not be issued.
Solicitation number W19EP26QA015 is issued as a request for quotation (RFQ).
There is no set-aside for this acquisition
The U.S. Army Corps of Engineers (USACE), Jacksonville District and Field Offices, has a requirement for:
2. Submission and Contact Information
Detail Information
Questions are due by 24 July 2026 at 9 AM EST
Responses are due by 31 July 2026 at 9AM EST
Points of Contact are:
Contract Specialist: Kelly Koger: kelly.l.koger@usace.army.mil
Contracting Officer: Dustin Furrey: dustin.l.furrey@usace.army.mil
Item
Supplies
Qty
Unit
Price
Total
0001
S351 Seal Set
3
Each
0002
S354 Seal Set
2
Each
0003
Estimated Shipping S351
0004
Estimated Shipping S354
Grand Total
Specifications: Five (5) Dam Gate Seal Assembly Sets (three for S351 and two for S354). These items require specialized manufacturing using a specified compound and must be packaged in protective wooden crates for shipment to Clewiston, FL. This request outlines the precise technical specifications, material characteristics, and logistical constraints necessary to ensure proper fabrication and delivery.
Technical Specifications & Material Requirements
Characteristic
Value
Durometer
60-70
Tensile Strength
3000 PSI
Elongation
450% Minimum
300% Modulus
900 PSI
Compression Set
30%
Water Absorption
5%
Low Temp. Brittleness
All Pass – no cracks
S351 Gate Seals (Qty 3):
• Configuration: Rectangular assembly (20ft 9-3/4" W x 8ft H).
• Top/Side Seals: Molded J-Bulb 1-3/4" Dia Bulb x 9/16" Tail x 5-1/8" OAW.
• Bottom Seal: Molded Flat Seal 1" Thk x 4" OAW.
• Features: 1/16" PTFE cladding 180° on Top & Side seals, VOSB molded corners, hot factory vulcanize spliced to size.
S354 Gate Seals (Qty 2):
• Configuration: Rectangular assembly (24ft 2" W x 8ft 9-5/8" H).
• Top/Side Seals: Molded J-Bulb 1-3/4" Dia Bulb x 9/16" Tail x 5" OAW.
• Bottom Seal: Molded Flat Seal 1" Thk x 4" OAW.
• Features: 1/16" PTFE cladding 180° on Top & Side seals, VOSB molded corners, hot factory volcanize spliced to size.
Execution, Packaging & Logistics
• Packaging & Shipping: All finished seals must be securely packed and shipped in wooden crates to prevent damage during transit. The integrity of the seals must be maintained throughout the transportation process.
• Fabrication Constraint: Seals are to be supplied without bolt holes. The vendor must adhere strictly to this constraint to avoid rendering the assemblies unusable upon delivery.
• Reference Prints: USACE will supply detailed drawings/prints to the selected vendor for reference to guarantee accurate molding and splicing.
Delivery Address: 525 Ridgelawn Rd. Clewiston, FL 33440
Files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Solicitation.pdf | ||
| 351 Seal Prints.pdf | ||
| 354 Seal Prints.pdf | ||
| 354_Seal Specifications.docx | DOCX document | |
| 351_Seal Specifications.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Seal assembly, shaft, SP | Land and Maritime | No set-aside | |
| Seal, nonmetallic speci | Land and Maritime | Total Small Business | |
| Seal, nonmetallic speci | Land and Maritime | Total Small Business | |
| Seal, nonmetallic round | Land and Maritime | No set-aside | |
| Seal, plain encased | Land and Maritime | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity