Retrofit/rebuild of a Cincinnati Milacron Internal Grinder, Model 476 Plain.

*******Amendment*********

It was noted that the evaluation criteria was inadvertently included on the solicitation (SF1449) as a reference rather than in full text.  The solicitation has been reposted and the full text information can be found on pages 6-9.   This solicitation will be extended for one week to ensure that all potential offerors have been able to review the evaluation criteria.  The new response date is 16 September at 10:00 am MST. 

*******Amendment********
Please read the questions and answers word document that has been attached.  Also, note the contact POC has been updated. Proposals should be sent to Kellee.Grose@hill.af.mil. 

*****Modification*****

Please note that the PWS was modified on 10 August 2011.  Changes have been made to section 1.1.4.  Section 1.9 has been added to include information on the painting requirements. Please see the attached modified PWS.

Combined Synopsis/Solicitation:
This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this announcement. This announcement constitutes the only solicitation; proposals are being requested. A written solicitation will not be issued. The solicitation number is FA8224-11-R-0033 and the solicitation is issued as a request for proposal (RFP). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-53. This acquisition is for a total small business set aside under NAICS code 811219.

This contracted service will provide a retrofit/rebuild of a Cincinnati Milacron Internal Grinder, Model 476 Plain, Serial Number 44088, located in the 309 CMXG. The contractor shall provide all tools, materials, equipment and labor necessary to retrofit/rebuild the Milacron Grinder. The contractor shall also provide and retrofit a GE FANUC 0I Controller to the grinder. All work shall meet the Original Equipment Manufacturers (OEM) tolerances and accuracies. Once the work has been completed the contractor shall provide a maximum of 40 hours of training. This training is to include up to twenty hours of mechanical training and up to twenty hours of operational training for two personnel. The requirements are outlined in the Performance Work Statement dated 7 March 2011.