Recuperator Press Modification Replacement
Closed Solicitation Posted
- Solicitation number
- W911KF-25-S-C002-A0017
- Agency
-
ACC Warren
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- Place of performance
- Anniston, Alabama 36201, United States
Notice details come from SAM.gov. Updated .
About this opportunity
Army Contracting Command-Anniston Army Depot seeks modification or replacement of a 75-ton hydraulic recuperator press used for pressure testing recuperator core assemblies, with Phase 1 questions due October 19 and Phase 1 responses due October 28. This is a Commercial Solutions Opening-Area of Interest (CSO-AoI) with no set-aside.
Place of performance is Anniston, Alabama. The contractor must design, manufacture, deliver, install, and demonstrate functional operation of the equipment, provide comprehensive operator and maintenance training, and ensure full replacement of obsolete parts. The system must maintain closed-loop load control during load tests and closed-loop distance control during pneumatic tests, with Main Platen loading rate of 44 inches per minute and Auxiliary Platen loading rate of 8.5 inches per minute. Fixture-to-fixture distance measurement accuracy must not exceed 0.002 inches. The system must store a minimum of 2,500 test reports with timestamps and identification numbers. Performance must ramp to target loads from 0 to 20,000 pounds with maximum tolerance of 25 lbs or 0.125% Full Scale, and step to incremental pneumatic loads up to 250 psig with tolerance of 1 psig or 0.4% Full Scale. Cycle-time target is 15–20 minutes. The existing press footprint is 180 inches by 120 inches with door clearance of 115 inches by 115 inches and overhead clearance of 174 inches.
Component sourcing must comply with DFARS 252.225-7001 Buy American requirements, limiting procurement to 26 qualifying countries. All proposed equipment is subject to the Trade Agreements Act. The NAICS code is 333517, Machine Tool Manufacturing; PSC is 3442, Hydraulic and Pneumatic Presses, Power Driven. Performance period is 6–12 months from award, with expected award in FY27. Evaluation is merit-based on three factors of equal or lesser importance: Technical and Innovative Merit, Delivery and Lifecycle Sustainment, and Price and Funds Availability. Price is not the primary determining factor. The Government will host a voluntary site visit October 14 at 9:00 AM CDT; RSVP deadline is October 7.
Notice text
CSO- Recuperator Press Modification Replacement
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Low Level Cranes- CSO | ACC Warren | No set-aside | |
| Aera of Interest (AoI) Equipment rental and Facility Support (CSO-W911KF25SC002) | ACC Warren | No set-aside | |
| Metal Forming Press Preventative Maintenance, Emergency Repairs and Parts | ACC Warren | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity