Rate Gyroscope CN-1552/A and CN-1564/A Repair Services
Closed Solicitation Posted
- Solicitation number
- W155P7T-26-R-0PRG
- Agency
-
ACC Aberdeen Proving Ground
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334511 Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Place of performance
- United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Contracting Command-Aberdeen Proving Ground is soliciting proposals for repair, testing, and inspection services for Rate Gyroscope CN-1552/A and CN-1564/A components used in Black Hawk UH-60A/L helicopters. The primary objectives are to ensure 100% operational readiness of these navigation system components through comprehensive maintenance services including test and inspection, major repair, and minor repair capabilities. Key contract requirements include establishing a repair facility within 90 days of award, maintaining a 45-day repair turnaround time for 15 or fewer units and 30 days for additional quantities, implementing a Diminishing Manufacturing Sources and Material Shortages (DMSMS) management program, and providing monthly status reports and repair tracking documentation. The government will evaluate proposals using a best-value trade-off process with weighted factors: Technical capability (50% weight, most important), Past Performance (40% weight), and Price (10% weight). Offerors must demonstrate a minimum of three years of gyroscope repair experience within the past five years and submit proposals electronically with a 10-page limit across technical, past performance, and price volumes. The proposal due date is December 23, 2025, with two amendments posted on December 11 and December 17, 2025.
This solicitation is not designated as a set-aside and represents a full and open competition. The government anticipates awarding a Firm-Fixed Price (FFP), Indefinite Delivery, Indefinite Quantity (IDIQ) contract with a five-year period of performance estimated to begin in February 2026. No specific award value or budget range is disclosed in the solicitation notice. The contract includes multiple Contract Line Item Numbers (CLINs) across five years covering test and inspection, major repair, and minor repair services for both gyroscope models, with Year 1 CLINs addressing the initial service requirements. Performance of all repair and maintenance services is to be conducted at the contractor's facility within the United States. The solicitation is classified under NAICS code 334511 (Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing) and PSC code 6615 (Automatic Pilot Mechanisms and Airborne Gyro Components), with solicitation number W15P7T-26-R-0PRG.
Notice text
3 versions
Update #3 · Latest ·
*****AMENDENT 1 POSTED 12/11... Please see attachment 7 for details.****
*****AMENDENT 2 POSTED 12/17... Please see attachment 7 for details.****
This is a combined synopsis/solicitation, W15P7T-26-R-0PRG for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested herein, and a separate written solicitation will not be issued.
This solicitation is being issued as a Request for Quotation (RFQ). This action is a Full and Open Competition award. This action is under NAICS code: 334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing and PSC code 6615 - Automatic Pilot Mechanisms and Airborne Gyro Components
The U.S. Army Contracting Command- Aberdeen Proving Ground (ACC-APG), an agency of the Government, intends to procure the following non-personal services contract to ensure 100% operations readiness of Rate Gyroscope CN-1552/A, NSN 6615-01-110-1083, P/N 304580-2 and Rate Gyroscope CN-1564/A, NSN 6615-01-110-1082, P/N 304580-1. The Government anticipates the issuance of a Firm- Fixed Price (FFP), Indefinite Delivery, Indefinite Quantity (IDIQ) type contract as a result of the subject solicitation. The anticipated period of performance shall include 5-year period of performance, with an estimated start date of February 2026. All services are requested to be proposed upon and specified by the vendor as seen below and in the attached Performance Work Statement (PWS), Attachment3 to this combined synopsis/solicitation:
Year 1 CLINs
CLIN 0001: FFP CY1 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 0002: FFP CY1 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 0003: FFP CY1 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 0004: FFP CY1 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 0005: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 0006: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
Year 2 CLINs
CLIN 1001: FFP CY2 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 1002: FFP CY2 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 1003: FFP CY2 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 1004: FFP CY2 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 1005: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 1006: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
Year 3 CLINs
CLIN 2001: FFP CY3 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 2002: FFP CY3 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 2003: FFP CY3 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 2004: FFP CY3 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 2005: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 2006: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
Year 4 CLINS
CLIN 3001: FFP CY4 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 3002: FFP CY4 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 3003: FFP CY4 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 3004: FFP CY4 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 3005: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 3006: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
Year 5 CLINs
CLIN 4001: FFP CY5 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 4002: FFP CY5 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 4003: FFP CY5 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 4004: FFP CY5 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 4005: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 4006: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
Years 1-5 CLINs
CLIN X007: Contract Data Requirements List (Not Separately Priced)
CLIN X008: Contractor Manpower Reporting (Not Separately Priced)
Best Estimated Quantity (BEQ) Repairs: The Governments annual BEQ for Repairs of the CN-1552/A and CN-1564/A is provided below for each ordering year of the contract and for planning purposes only. The BEQ does not represent a guarantee by the Government.
6615-01-110-1082 6615-01-110-1083
Year 1 BEQ 7 5
Year 2 BEQ 7 51
Year 3 BEQ 7 99
Year 4 BEQ 7 89
Year 5 BEQ 7 89
A single award will be made based on a Trade-Off Source selection Evaluation process evaluation approach as defined in FAR 13.106. Offerors shall refer to Attachment 2 to this combined synopsis/solicitation, which outlines Proposal Instructions (Section L) and Evaluation (Section M).
Offeror cost/price proposals will be evaluated based on the applicable criteria in FAR 13.1062(3)(a) based on competition and other factors. In accordance with Attachment 2, Sections L&M.
All responsible sources may submit a quote, which will be evaluated by the Contracting Officer. Offerors must be registered in the System for Award Management (SAM) database and include their assigned CAGE Code with the proposal submission. It is the responsibility of the Offeror to ensure that their submission complies with all applicable provisions of the FAR and its supplements. The Government MAY, but is not obligated to, consider an Offer that is non-compliant with any provision of the FAR and its supplements. Furthermore, the Government is NOT required to inform any Offeror that their Offer is non-compliant with the FAR or any of its supplements. Failure of an Offer to comply with any provision of the FAR and its supplements may result in the Offeror being deemed non-responsive to the solicitation.
The provision at 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition. The following addenda have been attached to this provision: Attachment 2 (L&M). The following provisions and clauses are applicable to this solicitation:
52.204-2 – Security Requirements
52.204-13 — SAM Maintenance
52.204-18 — CAGE Code Maintenance
52.204-19 — Incorporation by Reference of Representations & Certifications
52.203-19 — Prohibition on Requiring Certain Confidentiality Agreements
52.212-3- Offeror Representations and Certifications- Commerical Product and Commercial Services (to be submitted with the offer)
52.212-4 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
52.212-5 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services
52.216-18 — Ordering
52.216-19 — Order Limitations
52.216-22 — Indefinite Quantity
52.227-1 Authorization and Consent
52.227-2 – Notice and Assistance Regarding Patent and Copyright Infringement
52.227-14 Rights in Data- General
52.232-1 — Payments
52.232-8 — Discounts for Prompt Payment
52.232-29 Unenforceability of Unauthorized Obligations
52.233-1 — Disputes
52.242-15 -Stop Work Order
52.242-17 – Government Delay of Work
52.243-1 — Changes—Fixed-Price (or Alt I/II depending on your requirement type)
52.246-2 — Inspection of Supplies—Fixed-Price (or 52.246-4 for services)
52.249-1- Termination for Convenience of the Government
52.245-1 _ Government Property
52.245-9 _ Use and Charges
52.249-9 – Default (Fixed Price Supply and Service)
252.203-7000- Requirements Relating to Compensation of Former DoD Officials
252.203-7002- Requriments to Inform Employees of Whistleblower Rights
252.204-7008- Safeguarding Covered Defense Information and Cyber Incident Reporting
252.227-7013- Rights in Technial Data- Other Than Commerical Products and Commerical Services
252.227-7015- Technical Data- Commercial Products and Commerical Services
252.227-7037- Validation of Asserted Restrictions on Technical Data
252. 252.232-7003 — Electronic Submission of Payment Requests and Receiving Reports; and
252.232-7006 — Wide Area Workflow Payment Instructions.
252.245-7005 – Management and Reporting of Government Property
252.246-7007- Contractor Counterfeit Electronic Part Detection and Avoidance System
*Reference the PWS attachment 1 for additional FAR clauses*
Full text of these provisions and clauses, with noted exceptions regarding local clauses, may be obtained by accessing the following internet website: http://farsite.hill.af.mil/
Offerors may submit questions in reference to this announcement up until 1:00 PM EST on 15 December 2025. All questions will be answered via amendment to this combined synopsis/solicitation.
The offeror shall submit their quote via email to the Contract Specialist by 2:30PM EST on 23 December 2025. An email confirmation must be received in order to be considered submitted. It is the responsibility of the Offeror to allow adequate time to submit proposal files before the submission deadline.
Email address is as follows; Alyson.n.scholz.civ@army.mil please cc Roxanne.Barbaris.civ@mail.mil. Please note there is a 5MB limit on email size.
Contact information:
Alyson Scholz
Contract Specialist
Army Contracting Command- Aberdeen Proving Ground (ACC-APG)
alyson.n.scholz.civ@army.mil
Attachments
Attachment 1 combined synopsis solicitation (as shown in description above)
Attachment 2 Section L & M
Attachment 3 PWS (Updated with AMD 1)
Attachment 4 CDRLS
Attachment 5 QASP
Attachment 6 DD254 REMOVED with AMD 1
Attachment 7 Response to Industry Questions, AMD 2
Update #2 ·
*****AMENDENT 1 POSTED 12/11... Please see attachment 7 for details.****
This is a combined synopsis/solicitation, W15P7T-26-R-0PRG for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested herein, and a separate written solicitation will not be issued.
This solicitation is being issued as a Request for Quotation (RFQ). This action is a Full and Open Competition award. This action is under NAICS code: 334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing and PSC code 6615 - Automatic Pilot Mechanisms and Airborne Gyro Components
The U.S. Army Contracting Command- Aberdeen Proving Ground (ACC-APG), an agency of the Government, intends to procure the following non-personal services contract to ensure 100% operations readiness of Rate Gyroscope CN-1552/A, NSN 6615-01-110-1083, P/N 304580-2 and Rate Gyroscope CN-1564/A, NSN 6615-01-110-1082, P/N 304580-1. The Government anticipates the issuance of a Firm- Fixed Price (FFP), Indefinite Delivery, Indefinite Quantity (IDIQ) type contract as a result of the subject solicitation. The anticipated period of performance shall include 5-year period of performance, with an estimated start date of February 2026. All services are requested to be proposed upon and specified by the vendor as seen below and in the attached Performance Work Statement (PWS), Attachment3 to this combined synopsis/solicitation:
Year 1 CLINs
CLIN 0001: FFP CY1 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 0002: FFP CY1 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 0003: FFP CY1 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 0004: FFP CY1 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 0005: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 0006: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
Year 2 CLINs
CLIN 1001: FFP CY2 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 1002: FFP CY2 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 1003: FFP CY2 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 1004: FFP CY2 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 1005: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 1006: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
Year 3 CLINs
CLIN 2001: FFP CY3 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 2002: FFP CY3 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 2003: FFP CY3 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 2004: FFP CY3 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 2005: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 2006: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
Year 4 CLINS
CLIN 3001: FFP CY4 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 3002: FFP CY4 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 3003: FFP CY4 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 3004: FFP CY4 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 3005: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 3006: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
Year 5 CLINs
CLIN 4001: FFP CY5 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 4002: FFP CY5 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 4003: FFP CY5 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 4004: FFP CY5 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 4005: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 4006: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
Years 1-5 CLINs
CLIN X007: Contract Data Requirements List (Not Separately Priced)
CLIN X008: Contractor Manpower Reporting (Not Separately Priced)
Best Estimated Quantity (BEQ) Repairs: The Governments annual BEQ for Repairs of the CN-1552/A and CN-1564/A is provided below for each ordering year of the contract and for planning purposes only. The BEQ does not represent a guarantee by the Government.
6615-01-110-1082 6615-01-110-1083
Year 1 BEQ 7 5
Year 2 BEQ 7 51
Year 3 BEQ 7 99
Year 4 BEQ 7 89
Year 5 BEQ 7 89
A single award will be made based on a Trade-Off Source selection Evaluation process evaluation approach as defined in FAR 15.101-1. Offerors shall refer to Attachment 2 to this combined synopsis/solicitation, which outlines Proposal Instructions (Section L) and Evaluation (Section M).
Offeror cost/price proposals will be evaluated based on the applicable criteria in FAR 15.404-1 based on competition and other factors. In accordance with Attachment 2, Sections L&M.
All responsible sources may submit a quote, which will be evaluated by the Contracting Officer. Offerors must be registered in the System for Award Management (SAM) database and include their assigned CAGE Code with the proposal submission. It is the responsibility of the Offeror to ensure that their submission complies with all applicable provisions of the FAR and its supplements. The Government MAY, but is not obligated to, consider an Offer that is non-compliant with any provision of the FAR and its supplements. Furthermore, the Government is NOT required to inform any Offeror that their Offer is non-compliant with the FAR or any of its supplements. Failure of an Offer to comply with any provision of the FAR and its supplements may result in the Offeror being deemed non-responsive to the solicitation.
The provision at 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition. The following addenda have been attached to this provision: Attachment 2 (L&M). The following provisions and clauses are applicable to this solicitation:
52.204-2 – Security Requirements
52.204-13 — SAM Maintenance
52.204-18 — CAGE Code Maintenance
52.204-19 — Incorporation by Reference of Representations & Certifications
52.203-19 — Prohibition on Requiring Certain Confidentiality Agreements
52.212-3- Offeror Representations and Certifications- Commerical Product and Commercial Services (to be submitted with the offer)
52.212-4 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
52.212-5 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services
52.216-18 — Ordering
52.216-19 — Order Limitations
52.216-22 — Indefinite Quantity
52.227-1 Authorization and Consent
52.227-2 – Notice and Assistance Regarding Patent and Copyright Infringement
52.227-14 Rights in Data- General
52.232-1 — Payments
52.232-8 — Discounts for Prompt Payment
52.232-29 Unenforceability of Unauthorized Obligations
52.233-1 — Disputes
52.242-15 -Stop Work Order
52.242-17 – Government Delay of Work
52.243-1 — Changes—Fixed-Price (or Alt I/II depending on your requirement type)
52.246-2 — Inspection of Supplies—Fixed-Price (or 52.246-4 for services)
52.249-1- Termination for Convenience of the Government
52.245-1 _ Government Property
52.245-9 _ Use and Charges
52.249-9 – Default (Fixed Price Supply and Service)
252.203-7000- Requirements Relating to Compensation of Former DoD Officials
252.203-7002- Requriments to Inform Employees of Whistleblower Rights
252.204-7008- Safeguarding Covered Defense Information and Cyber Incident Reporting
252.227-7013- Rights in Technial Data- Other Than Commerical Products and Commerical Services
252.227-7015- Technical Data- Commercial Products and Commerical Services
252.227-7037- Validation of Asserted Restrictions on Technical Data
252. 252.232-7003 — Electronic Submission of Payment Requests and Receiving Reports; and
252.232-7006 — Wide Area Workflow Payment Instructions.
252.245-7005 – Management and Reporting of Government Property
252.246-7007- Contractor Counterfeit Electronic Part Detection and Avoidance System
*Reference the PWS attachment 1 for additional FAR clauses*
Full text of these provisions and clauses, with noted exceptions regarding local clauses, may be obtained by accessing the following internet website: http://farsite.hill.af.mil/
Offerors may submit questions in reference to this announcement up until 1:00 PM EST on 15 December 2025. All questions will be answered via amendment to this combined synopsis/solicitation.
The offeror shall submit their quote via email to the Contract Specialist by 2:30PM EST on 23 December 2025. An email confirmation must be received in order to be considered submitted. It is the responsibility of the Offeror to allow adequate time to submit proposal files before the submission deadline.
Email address is as follows; Alyson.n.scholz.civ@army.mil please cc Roxanne.Barbaris.civ@mail.mil. Please note there is a 5MB limit on email size.
Contact information:
Alyson Scholz
Contract Specialist
Army Contracting Command- Aberdeen Proving Ground (ACC-APG)
alyson.n.scholz.civ@army.mil
Attachments
Attachment 1 combined synopsis solicitation (as shown in description above)
Attachment 2 Section L & M
Attachment 3 PWS (Updated with AMD 1)
Attachment 4 CDRLS
Attachment 5 QASP
Attachment 6 DD254 REMOVED with AMD 1
Attachment 7 Response to Industry Questions, AMD 1
Update #1 ·
This is a combined synopsis/solicitation, W15P7T-26-R-0PRG for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested herein, and a separate written solicitation will not be issued.
This solicitation is being issued as a Request for Quotation (RFQ). This action is a Full and Open Competition award. This action is under NAICS code: 334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing and PSC code 6615 - Automatic Pilot Mechanisms and Airborne Gyro Components
The U.S. Army Contracting Command- Aberdeen Proving Ground (ACC-APG), an agency of the Government, intends to procure the following non-personal services contract to ensure 100% operations readiness of Rate Gyroscope CN-1552/A, NSN 6615-01-110-1083, P/N 304580-2 and Rate Gyroscope CN-1564/A, NSN 6615-01-110-1082, P/N 304580-1. The Government anticipates the issuance of a Firm- Fixed Price (FFP), Indefinite Delivery, Indefinite Quantity (IDIQ) type contract as a result of the subject solicitation. The anticipated period of performance shall include 5-year period of performance, with an estimated start date of February 2026. All services are requested to be proposed upon and specified by the vendor as seen below and in the attached Performance Work Statement (PWS), Attachment3 to this combined synopsis/solicitation:
Year 1 CLINs
CLIN 0001: FFP CY1 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 0002: FFP CY1 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 0003: FFP CY1 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 0004: FFP CY1 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 0005: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 0006: FFP CY1 - MINOR REPAIR CN/1552A, PWS 5.2
Year 2 CLINs
CLIN 1001: FFP CY2 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 1002: FFP CY2 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 1003: FFP CY2 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 1004: FFP CY2 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 1005: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 1006: FFP CY2 - MINOR REPAIR CN/1552A, PWS 5.2
Year 3 CLINs
CLIN 2001: FFP CY3 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 2002: FFP CY3 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 2003: FFP CY3 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 2004: FFP CY3 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 2005: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 2006: FFP CY3 - MINOR REPAIR CN/1552A, PWS 5.2
Year 4 CLINS
CLIN 3001: FFP CY4 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 3002: FFP CY4 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 3003: FFP CY4 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 3004: FFP CY4 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 3005: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 3006: FFP CY4 - MINOR REPAIR CN/1552A, PWS 5.2
Year 5 CLINs
CLIN 4001: FFP CY5 - TEST AND INSPECT (T&I) CN-1552/A PWS 5.2
CLIN 4002: FFP CY5 - TEST & INSPECT (T&I) CN-1564/A PWS 5.2
CLIN 4003: FFP CY5 - MAJOR REPAIR CN-1552/A, PWS 5.2
CLIN 4004: FFP CY5 - MAJOR REPAIR CN-1564/A, PWS 5.2
CLIN 4005: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
CLIN 4006: FFP CY5 - MINOR REPAIR CN/1552A, PWS 5.2
Years 1-5 CLINs
CLIN X007: Contract Data Requirements List (Not Separately Priced)
CLIN X008: Contractor Manpower Reporting (Not Separately Priced)
Best Estimated Quantity (BEQ) Repairs: The Governments annual BEQ for Repairs of the CN-1552/A and CN-1564/A is provided below for each ordering year of the contract and for planning purposes only. The BEQ does not represent a guarantee by the Government.
6615-01-110-1082 6615-01-110-1083
Year 1 BEQ 7 5
Year 2 BEQ 7 51
Year 3 BEQ 7 99
Year 4 BEQ 7 89
Year 5 BEQ 7 89
A single award will be made based on a Trade-Off Source selection Evaluation process evaluation approach as defined in FAR 15.101-1. Offerors shall refer to Attachment 2 to this combined synopsis/solicitation, which outlines Proposal Instructions (Section L) and Evaluation (Section M).
Offeror cost/price proposals will be evaluated based on the applicable criteria in FAR 15.404-1 based on competition and other factors. In accordance with Attachment 2, Sections L&M.
All responsible sources may submit a quote, which will be evaluated by the Contracting Officer. Offerors must be registered in the System for Award Management (SAM) database and include their assigned CAGE Code with the proposal submission. It is the responsibility of the Offeror to ensure that their submission complies with all applicable provisions of the FAR and its supplements. The Government MAY, but is not obligated to, consider an Offer that is non-compliant with any provision of the FAR and its supplements. Furthermore, the Government is NOT required to inform any Offeror that their Offer is non-compliant with the FAR or any of its supplements. Failure of an Offer to comply with any provision of the FAR and its supplements may result in the Offeror being deemed non-responsive to the solicitation.
The provision at 52.212-1, Instructions to Offerors – Commercial, applies to this acquisition. The following addenda have been attached to this provision: Attachment 2 (L&M). The following provisions and clauses are applicable to this solicitation:
52.204-2 – Security Requirements
52.204-13 — SAM Maintenance
52.204-18 — CAGE Code Maintenance
52.204-19 — Incorporation by Reference of Representations & Certifications
52.203-19 — Prohibition on Requiring Certain Confidentiality Agreements
52.212-3- Offeror Representations and Certifications- Commerical Product and Commercial Services (to be submitted with the offer)
52.212-4 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
52.212-5 — Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services
52.216-18 — Ordering
52.216-19 — Order Limitations
52.216-22 — Indefinite Quantity
52.227-1 Authorization and Consent
52.227-2 – Notice and Assistance Regarding Patent and Copyright Infringement
52.227-14 Rights in Data- General
52.232-1 — Payments
52.232-8 — Discounts for Prompt Payment
52.232-29 Unenforceability of Unauthorized Obligations
52.233-1 — Disputes
52.242-15 -Stop Work Order
52.242-17 – Government Delay of Work
52.243-1 — Changes—Fixed-Price (or Alt I/II depending on your requirement type)
52.246-2 — Inspection of Supplies—Fixed-Price (or 52.246-4 for services)
52.249-1- Termination for Convenience of the Government
52.245-1 _ Government Property
52.245-9 _ Use and Charges
52.249-9 – Default (Fixed Price Supply and Service)
252.203-7000- Requirements Relating to Compensation of Former DoD Officials
252.203-7002- Requriments to Inform Employees of Whistleblower Rights
252.204-7008- Safeguarding Covered Defense Information and Cyber Incident Reporting
252.227-7013- Rights in Technial Data- Other Than Commerical Products and Commerical Services
252.227-7015- Technical Data- Commercial Products and Commerical Services
252.227-7037- Validation of Asserted Restrictions on Technical Data
252. 252.232-7003 — Electronic Submission of Payment Requests and Receiving Reports; and
252.232-7006 — Wide Area Workflow Payment Instructions.
252.245-7005 – Management and Reporting of Government Property
252.246-7007- Contractor Counterfeit Electronic Part Detection and Avoidance System
*Reference the PWS attachment 1 for additional FAR clauses*
Full text of these provisions and clauses, with noted exceptions regarding local clauses, may be obtained by accessing the following internet website: http://farsite.hill.af.mil/
Offerors may submit questions in reference to this announcement up until 1:00 PM EST on 15 December 2025. All questions will be answered via amendment to this combined synopsis/solicitation.
The offeror shall submit their quote via email to the Contract Specialist by 2:30PM EST on 23 December 2025. An email confirmation must be received in order to be considered submitted. It is the responsibility of the Offeror to allow adequate time to submit proposal files before the submission deadline.
Email address is as follows; Alyson.n.scholz.civ@army.mil please cc Roxanne.Barbaris.civ@mail.mil. Please note there is a 5MB limit on email size.
Contact information:
Alyson Scholz
Contract Specialist
Army Contracting Command- Aberdeen Proving Ground (ACC-APG)
alyson.n.scholz.civ@army.mil
Attachments
Attachment 1 combined synopsis solicitation (as shown in description)
Attachment 2 Section L & M
Attachment 3 PWS
Attachment 4 CDRLS
Attachment 5 QASP
Attachment 6 DD254
Files
| File | Type | Posted |
|---|---|---|
| Attachment 3 Pitch Rate Gyro PWS_20251210.pdf | ||
| Attachment 2 - Section L M - PRG_.docx | DOCX document | |
| Attachment 7 Response to Industry Questions PRG_ Amd 2.docx | DOCX document | |
| Attachment 7 Response to Industry Questions PRG_ Amd 1.docx | DOCX document | |
| Attachment 3 Pitch Rate Gyro PWS_20251210.docx | DOCX document | |
| Attachment 6- DD254_W15P7T26R0PRG.pdf | ||
| Attachment 3 - Pitch Rate Gyro PWS - 20250502.docx | DOCX document | |
| Attachment 4 - CDRLS - PRG.pdf | ||
| Attachment 2 - Section L M - PRG_.docx | DOCX document | |
| Attachment 5 - QASP - PRG.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Overhaul of the UH-60 POWER TURBINE MODULE | ACC Redstone | No set-aside | |
| Overhaul of the AH-64 Apache Housing Assy, Pitch M/R | ACC Redstone | No set-aside | |
| FMS Repair QTY: 4, H-60 | Naval Supply Systems Command | No set-aside | |
| Overhaul of Rotary Wing and Rotary Rudder Blades | Coast Guard | No set-aside | |
| Synopsis, Sensor Gimbal GS207, NSN: 5836-01-556-9112 | Department of the Army | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity