Q503--509-23-4-063-0005/Dental Lab SVC/36C24718C01664 (VA-23-00025447)

GENERAL REQUIREMENTS

1. The contractor shall provide all labor, transportation, materials, general dental laboratory tools, equipment and supervision required to provide dental prostheses.

2. The contractor shall fabricate dental prostheses items in strict accordance with the dental laboratory order for the fabrication of dental prostheses, which shall include but not be limited to all laboratory fabrication aspects of complete dentures, removable partial dentures, fixed partial dentures and crowns, and dental implant prosthesis. They must be made locally and not be shipped out of country for fabrication.

3. Contractor shall advise of any special handling that may be required on specific orders which may be authorized on a case-by- case basis by the VAMC and paid for under a separate purchase order.

4. Contractor shall comply with the below identified turnaround time for all non-emergent dental prosthetic items.

a) Twenty-four hours:

1) Complete and Removable Partial Denture, acrylic resin repairs

2) Complete and Removable Partial Denture, tooth additions/repairs

3) Removable Partial Denture, clasp repair/replacement and wrought wire clasp retained by acrylic resin

4) Custom impression trays

5) Custom impression trays, altered cast impression

5) Poured Impressions

6) Articulation of cast

7) Cast duplications

8) Fluoride application tray

9) Occlusal nite-guard, vacuuform

b) Forty-eight hours:

1) Complete and Removable Partial Denture, relines

2) Complete and Removable Partial Dentures, rebase

3) Complete and Removable Partial Denture, record bases and occlusion rims

4) Complete and Removable Partial Denture, record bases and occlusion rims, stabilized/processed

5) Transitional Removable Partial Denture, processed

6) Post and Core, cast

7) Solder Connectors

8) Fixed Partial Denture (FPD) crown working casts

c) Three Working Days:

1) Implant Fixed Partial Denture, veneer application

2) Surgical Stents, processed

3) Diagnostic wax-up, four teeth or less

4) Tooth Rearrangements, Complete and Removable Partial Dentures

5) Fixed Partial Denture, framework

6) Implant Fixed Bar

7) Porcelain to metal crowns

d) Five Working Days:

1) Complete and Removable Partial Denture, process acrylic resin

2) Obturator, process acrylic resin

3) Removable Partial Denture, framework

4) Porcelain butt margin crowns

5) Surveyed Crowns

6) Crowns, to fix existing Removable Partial Denture

7) Tooth Arrangements, Complete and Removable Partial Dentures

8) FPD/crown fabrication or veneer application

9) Occlusal nite-guard, processed acrylic resin

10) All ceramic restorations

11) Diagnostic wax-up, five teeth or more

e) Eight Working Days:

1) Removable Partial Denture, framework w/incorporated occlusion

2) Fixed Partial Denture, eight units and over

3) Implant Bar with acrylic resin base

f) Ten Working Days:

1) Attachment Prosthesis

5. Contractor shall utilize the following materials during the fabrication of below dental prostheses

a) Complete Dentures/Removable Partial Dentures:

1) Lucitone 199 acrylic resin or equivalent

2) Coelor coloration or equivalent

3) Occlusal Scheme:

4) Monoplane, linear

5) Anatomic, full balanced

6) Lingualized, linear

7) 33 */monoplane

8) 30 *rational

9) Tooth Material: Trybyte TMIPN or equivalent

b) Fixed Partial Denture/Crown:

1) Gold: Harmony hard or equivalent (noble metal)

2) Noble allow for PFM restorations: Olympia or equivalent

c) Neutrocentric:

1) 0o flat plan

d) Implant Systems:

1) Barnemark System or equivalent

2) 3i Systems or equivalent

3) Calcitek TMSystems or equivalent

4) Paragon TM Systems or equivalent

5) Means degrees

6. The contractor shall provide the VA Dental Service with authorization and order forms.

7. The contractor shall pick-up from and deliver to the VA Dental Service once daily, Monday through Friday. All deliveries will comply with VA Directive 6609.

8. Contractor shall consult with the appropriate dental care provider at the VA Dental Service regarding any specific laboratory order.

9. Contractor shall have all required licenses, permits, and certifications as required by federal, state and local authorities and be certified but the National Association of Dental Laboratories (NADL). Awarded contract 36C24723P0585 to CLARK DENTAL ART, INC. for 448740.35000000 on 2023-04-06.