Powder Bed Fusion Development of Oxide Dispersion Strengthened Alloys
Closed Special Notice Posted
- Solicitation number
- 80NSSC26927629Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- 8(a) Sole Source
Opportunity facts
- NAICS code
- 561990 All Other Support Services
- PSC
- 3438 Miscellaneous Welding Equipment
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center (NSSC) has issued a Special Notice for Powder Bed Fusion Development of Oxide Dispersion Strengthened Alloys under an 8(a) sole source set-aside. The contracting officer intends to award this contract solely to NORTH AMERICAN MANUFACTURING PROS LLC, located in Ardmore, Alabama, based on a determination that this firm is the sole provider capable of delivering the required services. The procuring center is NASA/NSSC, with performance to be conducted at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This procurement is classified under NAICS Code 561990 (All Other Support Services) and will be conducted using commercial item procedures under FAR Parts 12 and 13. The government is providing interested organizations with an opportunity to submit written capabilities and qualifications statements to demonstrate whether alternative sources exist before the sole source award is finalized.
The primary objective of this procurement is to develop laser powder bed fusion (L-PBF) processes for oxide dispersion strengthened (ODS) and burn-resistant nickel-based alloys over a nine-month performance period. Interested contractors must submit written capabilities and qualifications by 3:00 p.m. Central Standard Time on March 18, 2026, with submissions evaluated solely to determine whether competitive procurement is warranted. The contractor must provide access to a fully dedicated EOS M280 laser powder bed fusion system with minimum 432 operational hours per month and a 60% print utilization rate, develop and optimize parameter sets for multiple target alloys, perform at least 100 mechanical tests, and supply a minimum of 200 pounds of powder per developmental alloy with full traceability certification. While the notice currently designates NORTH AMERICAN MANUFACTURING PROS LLC as the intended sole source awardee, the government reserves discretion to conduct full and open competition based on responses received. Oral communications are not acceptable, and additional guidance is available through NASA's Center Ombudsman program.
Notice text
Synopsis:
NASA/NSSC has a requirement for Powder Bed Fusion Development of Oxide Dispersion Strengthened Alloys.
NASA/NSSC intends to issue a sole source contract to NORTH AMERICAN MANUFACTURING PROS LLC 29176 Al Highway 53 Ardmore, Alabama 35739 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that NORTH AMERICAN MANUFACTURING PROS LLC is the sole provider of Powder Bed Fusion Development of Oxide Dispersion Strengthened Alloys.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 561990
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 3/18/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
McKenzie Hanson
Procurement Specialist
McKenzie.M.Hanson@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0040586 Tab 04 4 SOW Redacted.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Support design and structural analysis for Hiwrap, MBARS, CRS and COSSIR instruments on the NASA WB57 aircraft | Shared Services Center | No set-aside | |
| MassTech Atmospheric Pressure Matrix-Assisted Laser Desorption/Ionization | Shared Services Center | No set-aside | |
| nTop License Renewal | Shared Services Center | No set-aside | |
| Service request for specimen embedding and sectioning. | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity