Plasma Spray Booth Cleaning Services
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA813224Q0054
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Tinker AFB, Oklahoma 73145, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center is seeking to award a firm-fixed price contract for Plasma Spray Booth Cleaning Services at Tinker Air Force Base in Oklahoma. The contractor will be required to provide all labor, tools, equipment, materials, quality control, and transportation necessary to clean the plasma spray booths, dust collectors, and grit blast dust collectors in accordance with the Performance Work Statement. The contract will have a base year and four one-year option periods. Quotes are due by October 8, 2024 at 12:00 PM Central Daylight Time, and the award will be made to the responsible offeror with the lowest total evaluated price, provided they are determined capable and have the required experience.
This procurement is a 100% small business set-aside, and large businesses are not eligible. The NAICS code is 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. The contract's estimated start date is December 1, 2024, and payment will be made via Net 30 terms with the option for early payment discounts. The place of performance is Tinker Air Force Base in Oklahoma City, Oklahoma.
Notice text
4 versions
Update #4 · Latest ·
DUE DATE EXTENDED to 24 October 2024
SITE VISIT QUESTIONS & ANSWERS:
1. Are contract employees required to have an on-call spill response capability in the event of a spill outside of 1500-2300 (Swing Shift) working hours?
- Contractors shouldn’t be on site outside of working hours, but there is a spill number listed in the shop near the hazardous waste containers and drain.
2. Is there any requirement for a contractor provided vehicle to transport equipment between Building 3001 and Building 3221?
- There isn’t any specific requirement, must follow common base rules.
3. Does the government provide a location to store Contractor Personal Protective Equipment on site or will Contractor be required to bring PPE on site and remove daily?
- Accommodations can be discussed, but I believe past contractors brought their own PPE and didn’t store it here.
4. The PWS references Contractor-provided brooms, dustpans, mops, etc will be stored in a locked cabinet. Is there a dedicated cabinet located on site to store this equipment?
- Yes the government can find a dedicated area or closet of some kind
5. The PWS, 1.3.3, mentions non-reflective black or gray peel coat paint. Is Clear or Translucent acceptable?
- Yes
6. What is the approximate weight and size of the 76 PMXG’s HEPA vacuums which 1.2.7 references are the responsibility of the Contractor to empty periodically?
- Roughly 30-40 lbs
7. PWS 1.3.1 (Floor Cleaning). When floor is mopped/power scrubbed during the quarterly cleaning, are there any special requirements for disposing of the contaminated/dirty water? Is it drummed or can it be disposed of down the drain to the IWTP? Does it require approval IAW 1.17 during each quarterly cleaning?
- There is a hazardous waste drain in the shop that is used weekly by operators. This will be where the liquid waste goes.
Due date extended to 22 October 2024 to allow for questions and answers which will be posted as an Amendment 2.
Amendment 1 to the CSS adds SITE VISIT information and EXTENDS quote due dates
Cleaning Services for Plasma Spray Booths, Plasma Spray Booth Dust Collectors, and Grit Blast Dust Collectors In Accordance With (IAW) the Performance Work Statement (PWS).
Update #3 ·
Due date extended to 22 October 2024 to allow for questions and answers which will be posted as an Amendment 2.
Amendment 1 to the CSS adds SITE VISIT information and EXTENDS quote due dates
Cleaning Services for Plasma Spray Booths, Plasma Spray Booth Dust Collectors, and Grit Blast Dust Collectors In Accordance With (IAW) the Performance Work Statement (PWS).
Update #2 ·
Amendment 1 to the CSS adds SITE VISIT information and EXTENDS quote due dates
Cleaning Services for Plasma Spray Booths, Plasma Spray Booth Dust Collectors, and Grit Blast Dust Collectors In Accordance With (IAW) the Performance Work Statement (PWS).
Update #1 ·
Cleaning Services for Plasma Spray Booths, Plasma Spray Booth Dust Collectors, and Grit Blast Dust Collectors In Accordance With (IAW) the Performance Work Statement (PWS).
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| Plasma Spray Booth Cleaning Services | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Film processing equipment PM/RM | Air Force Sustainment Center | No set-aside | |
| 2-STEP SEALED BID - TINKER AFB WWYK250019 Remove and Replace Fire Sprinkler in Plasma Booth Dust Collectors and Replace the Building F/A System, B3221 | Air Force Sustainment Center | Total Small Business | |
| Service Repair for Sciaky Spot Welder | Air Force Sustainment Center | No set-aside | |
| FY27 42SFS CATM Range Cleaning | Air Education and Training Command | Total Small Business | |
| F108 Outer Nozzle Support Repair | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity