Persistent, Geochemically-Driven Low-Temperature Power Systems for Subsea Intelligence, Surveillance, and Reconnaissance

Open Pre-Solicitation Posted

Solicitation number
DON27TZ02-NV010
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

Points of contact
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Office of Naval Research, Department of the Navy, intends to solicit proposals under DoD STTR topic DON27TZ02-NV010 for a persistent, geochemically driven low-temperature subsea power system for Arctic intelligence, surveillance, and reconnaissance, with responses due January 6, 2027. The Set Aside is Total Small Business, and the notice carries CMMC Level 2 (Self) and is marked ITAR: No. The topic is an STTR Phase I effort under NAICS 541715 and PSC AC12, posted November 4, 2026.

The Navy seeks a modular, self-sustaining, non-toxic energy harvester that exploits the redox potential difference between anoxic marine sediment and oxygenated overlying seawater to power distributed seabed ISR sensor nodes and UUV docking stations without battery replacement. Required performance includes reliable operation at -2C, at least 250mW average net harvested power, and onboard storage sufficient to operate up to a 5W (objective) sensor payload for 10 minutes every 4 hours over a projected 24+ month deployment. The topic is positioned against conventional lithium-chemistry batteries, which the notice describes as degrading in extreme cold, hazardous, and in need of frequent physical replacement in ice-covered environments.

Notice text

DoD STTR topic DON27TZ02-NV010

Component: NAVY

Command: ONR

Phase: STTR Phase I

Technology Areas: None

Focus Areas: Advanced Materials; Biotechnology

Keywords: Subsea Power; Arctic ISR; Arctic Intelligence, Surveillance, and Reconnaissance; Geochemical Energy Harvesting; Undersea Logistics; Advanced Catalytic Materials; Contested Environments; Seafloor Electrochemical Systems

ITAR: No

CMMC: Level 2 (Self)

Objective:

Develop a modular, self-sustaining, non-toxic subsea energy-harvesting capability that exploits naturally occurring sediment-seawater geochemical gradients to provide persistent, logistics-free power for distributed Intelligence, Surveillance, and Reconnaissance (ISR) sensor nodes in Arctic marine environments, with reliable operation at -2°C, and providing at least 250mW average net harvested power and storing sufficient energy in an onboard storage subsystem to operate up to a 5W (objective) sensor payload for 10 minutes every 4 hours over a projected 24+ month deployment.

Description:

The Department of the Navy’s expanding operational requirements in the Arctic domain demand persistent subsea situational awareness. Current seabed ISR nodes and Unmanned Underwater Vehicle (UUV) docking stations rely on conventional lithium-chemistry batteries. These legacy power sources present severe logistical and operational limitations: they suffer from rapid capacity degradation in extreme cold, possess highly toxic/hazardous chemistries, and require frequent, resource-intensive physical replacement (battery swapping) in highly contested or ice-covered environments.

To achieve persistent, logistics-free ISR, the Navy has a critical need for an environmentally benign, deploy-and-forget power architecture. This STTR topic seeks the development of Seafloor Electrochemical Power Harvesters to generate continuous electrical current by exploiting the natural oxidation-reduction (redox) potential difference between the anoxic marine sediment (mud) and the oxygenated overlying seawater. The proposed approach must demonstrate a credible path to 5W power and 24-month endurance in sub-zero Arctic conditions through a ruggedized seabed electrochemical power-harvesting architecture that maximizes long-term energy extraction while using only indigenous sediment microbial communities and naturally occurring geochemical gradients. Proposed solutions may use abiotic or biologically mediated mechanisms via electrode design, power management, and optimum emplacement.

Biocatalytic Prioritization & Environmental Strictures:

While purely abiotic electrochemical approaches will be considered, approaches that leverage biologically-mediated processes (e.g., utilizing natural biocatalysis to enhance electron transfer at the anode) will be prioritized due to their potential for higher power density and self-renewing longevity.

However, to prevent any risk of ecological disruption to fragile Arctic ecosystems, solutions must strictly rely on harnessing the naturally occurring, indigenous populations already present in the local sediment. The introduction, deployment, or seeding of any exogenous, synthetic, lab-grown, or non-native biological agents (microbes/bacteria) is strictly prohibited.

By utilizing advanced electrode materials that naturally synergize with the local subsea environment, the system must reduce or avoid reliance on deployable primary batteries for the supported payload while ensuring operational viability in extreme cold and high-pressure conditions.

Phase I:

Formulate the theoretical electrochemical model for sub-zero geochemical harvesting. Identify and test advanced catalytic electrode materials that maximize electron transfer efficiency at -2°C, prioritizing architectures that optimize interaction with indigenous sediment microbial communities and/or indigenous electroactive microorganisms.

Conduct a benchtop prototype demonstrating the targeted voltage and current density in a simulated cold-water/sediment environment utilizing only native sediment samples, accompanied by a scalable power management design.

Phase II:

Scale the Phase I material architecture into a prototype ruggedized, modular power generation unit. Integrate the system with advanced, low-loss DC-DC boost converters to condition the output for standard ISR payloads. Conduct extensive tank testing in simulated Arctic conditions to validate the 24-month longevity and an objective of 5W output. Position the Phase II prototype to be tested against PMS 485-D2 surrogate sensor payloads to prove integration and power conditioning.

Deliver a TRL 5/6 deployable prototype system and comprehensive testing data proving capability integration with a surrogate acoustic or environmental sensor. Prepare a Phase III commercialization/transition plan.

Phase III:

Transition the technology into a deployable form factor for Navy undersea infrastructure. Integrate the power module with operational subsea sensor networks, UUV charging nodes, or acoustic listening arrays. Deliver a qualified plug-and-play auxiliary power module that can be integrated into the next-generation Distributed Maritime Operations (DMO) surveillance architectures managed by PMS 485.

Transition the technology to commercial sectors for powering offshore oil and gas monitoring equipment, oceanographic research sensors, and early-warning tsunami detection networks.

Similar open opportunities

Opportunity Agency Set-aside Responses due
Self-Sustaining Wave Energy Capture for Persistent Autonomous Ocean-Going Systems NAICS 541715 Office of Naval Research Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors