Multi-Modal Luminescent Paint Systems for Underwater Surface Diagnostics
Open Pre-Solicitation Posted
- Solicitation number
- DON27TZ02-NV007
- Agency
-
Office of Naval Research
Secretary of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Julie Young yinlu.young.civ@us.navy.mil
- Mark Spector mark.spector.civ@us.navy.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Navy's Office of Naval Research is preparing to procure a Phase I STTR effort under topic DON27TZ02-NV007, Multi-Modal Luminescent Paint Systems for Underwater Surface Diagnostics, under a Total Small Business set-aside, with responses due January 6, 2027. The objective is an integrated, multi-modal luminescent paint system for simultaneous, non-intrusive, large-scale, high-resolution global measurement of wall pressure, shear stress, and temperature fluctuations on complex, curved geometries in underwater environments. The notice cites three technical barriers. Conventional pressure-sensitive paint relies on oxygen quenching, which is inhibited when submerged and suffers from slow response and temperature cross-sensitivity. Temperature-sensitive paint depends on Taylor's frozen-flow hypothesis, which breaks down in water. Mechano-luminescent paint formulations are described as technologically immature. The topic is classified under NAICS 541715 and PSC AC12, is marked ITAR: No, and requires CMMC Level 2 (Self).
Notice text
DoD STTR topic DON27TZ02-NV007
Component: NAVY
Command: ONR
Phase: STTR Phase I
Technology Areas: None
Focus Areas: Advanced Materials
Keywords: Naval Hydrodynamics; Hydro-Acoustics; Advanced Diagnostics; Pressure Sensitive Paint
ITAR: No
CMMC: Level 2 (Self)
Objective:
Develop an integrated, multi-modal luminescent paint system optimized for simultaneous, non-intrusive, large-scale, high-resolution global measurement of wall pressure, shear stress, and temperature fluctuations on complex, curved geometries in underwater environments.
Description:
Quantifying coupled boundary layer interactions along hydrodynamic surfaces require non-intrusive, full-field imaging of surface pressure, temperature, and skin friction (shear stress). While optical diagnostics have revolutionized aerodynamic testing, adapting luminescent paints to hydrodynamic testing in water introduces fundamental physical and application constraints that current state-of-the-art systems cannot overcome:
• Pressure-Sensitive Paint (PSP): Conventional PSP relies on oxygen-quenching physics. When submerged, oxygen diffusion into the polymer binder is severely inhibited by the liquid boundary layer and low oxygen solubility, rendering standard PSPs insensitive or plagued by extremely slow response times. Furthermore, severe temperature cross-sensitivity corrupts the pressure signal.
• Temperature-Sensitive Paint (TSP): Accurate dynamic temperature measurements are crippled by the standard utilization of Taylor’s frozen-flow hypothesis, which inaccurately assumes turbulent structures remain unchanged as they advect. In water, non-equilibrium flow, high thermal mass and rapid localized diffusion cause this hypothesis to break down, failing to capture true high-frequency temperature fluctuations.
• Mechano-Luminescent Paint (MLP): MLPs offer a direct optical pathway to map shear stress via mechanical deformation. However, current MLP formulations are in their technological infancy, suffering from poor dynamic range, low luminous efficiency, and signal degradation from material fatigue and hydrostatic pressure cross-talk.
In addition to the above challenges, current formulations are difficult to apply uniformly over large areas. Existing techniques fail to maintain a consistent, repeatable coating thickness on complex, curved, or non-flat surfaces. This inconsistency skews calibration and compromises measurement reliability across large-field hydrodynamic models. Innovative material architectures, such as utilizing distinct, multi-color mechano-luminescent particles or multi-core/shell dye structures, may enable simultaneous, uncoupled optical separation of pressure, shear, and temperature in all flow environments, i.e. gas, liquid, and multiphase flows.
This STTR topic seeks an integrated material, application, and optical processing suite. The system must decouple cross-sensitivities and deliver simultaneous, high dynamic range, full-field quantitative maps of the wall pressure, shear, and temperature fluctuations.
Phase I:
Develop a concept for advanced formulations for water-compatible PSP, TSP, and MLP systems capable of measuring pressure fluctuations from 10 Pa to 100 kPa, shear stress from 0.1 to 100 Pa, and temperature variations from 0.05 to 20°C, as well as providing uniform spatial sampling capable of resolving unsteadiness up to 50 kHz without relying on Taylor’s hypothesis. Evaluate the conceptual system’s ability to decouple cross-sensitivities in simultaneous mapping of wall pressure, shear stress, and temperature through analytic modeling and laboratory testing. Identify potential application methodologies (e.g., specialized spray or deposition techniques) that ensure uniform, repeatable adhesion to curved, non-flat structures. Perform an initial cost estimate and identify technical risks to be addressed in Phase II.
Phase II:
Demonstrate a fully functional, multi-modal prototype paint system on a large-scale (greater than a square meter), curved hydrodynamic model in a test facility. Evaluate the dynamic range, resolution, and frequency response of the system. Validate analytic models of the cross-sensitivities developed in Phase I. Demonstrate a highly repeatable application process achieving less than 5% thickness variation across complex curves, ensuring consistent calibration. Evaluate paint degradation, peeling, or leaching under flow velocities up to 15 m/s over continuous 8-hour test windows. Conduct a detailed cost and manufacturing analysis. Prepare a Phase III commercialization/transition plan.
Phase III:
Develop an improved formulation and manufacturing plans using the knowledge gained during Phases I and II in order to support transition of the technology for Navy use and use in hydrodynamics, aerospace, automotive, energy system, and electronics packaging applications.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Persistent, Geochemically-Driven Low-Temperature Power Systems for Subsea Intelligence, Surveillance, and Reconnaissance | Office of Naval Research | Total Small Business | |
| Photonic-Crystal Surface Emitting Lasers (PCSELS) in the Near-Infrared (NIR) | Office of Naval Research | Total Small Business | |
| Compact Unmanned Aerial System for Marine Species Monitoring | Office of Naval Research | Total Small Business | |
| Expeditionary Water Quality Sensors | Office of Naval Research | Total Small Business | |
| Luminescence-Based Surface Measurement Technique for Simultaneous Pressure and Temperature Measurements within Non-Oxygen Based Hypersonic Ground Test Facilities | Air Force Materiel Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity