Overhaul/Rebuild of 3 A-15-A EMD AC Synchronous Alternators

Please review the attached Combined Synopsis Solicitation with the Performance Work Statement and provide a quote no later than 2:00 pm Eastern Daylight Time, on Wednesday 19 September 2018.
100% Total Small Business Set Aside applies
IMPORTANT: The three evaluation factors are: technical, past performance, and price. See the Combined Synopsis Solicitation for more information regarding the factors.
A non-acceptable rating in either non-priced factor will deem the offeror's quote technically unacceptable.
The Contractor shall provide all personnel, equipment, tools, materials, supervision, unit weather protection, other items, and non-personnel services necessary to perform work on three (3) 1.5 MW, EMD power generation alternators (model number A-15-A), to include disassembly and removal of alternators, transportation to and from overhaul facility, visually inspect/overhaul/repair or renewal of all associated sub-assemblies; (i.e. steam/bake all parts/components, complete required rewinding as necessary, replace slip rings, resurface/replace brushes, rotor/stator dip and bake, replace bearings, burn and sand blast end bells, repaint and prep, ect...); as-well-as complete mechanical/ electrical inspections prior to reassembly/installation of alternators to generator prime movers, aligning/ balancing/ adjusting of alternators during re-installation and performance of brush seat and slip ring film re-establishing period during load test.
.

Please review the attached Combined Synopsis Solicitation with the Performance Work Statement and provide a quote no later than 2:00 pm Eastern Daylight Time, on 17 September 2018.
100% Total Small Business Set Aside applies
IMPORTANT: The three evaluation factors are: technical, past performance, and price. See the Combined Synopsis Solicitation for more information regarding the factors.
A non-acceptable rating in either non-priced factor will deem the offeror's quote technically unacceptable.
The Contractor shall provide all personnel, equipment, tools, materials, supervision, unit weather protection, other items, and non-personnel services necessary to perform work on three (3) 1.5 MW, EMD power generation alternators (model number A-15-A), to include disassembly and removal of alternators, transportation to and from overhaul facility, visually inspect/overhaul/repair or renewal of all associated sub-assemblies; (i.e. steam/bake all parts/components, complete required rewinding as necessary, replace slip rings, resurface/replace brushes, rotor/stator dip and bake, replace bearings, burn and sand blast end bells, repaint and prep, ect...); as-well-as complete mechanical/ electrical inspections prior to reassembly/installation of alternators to generator prime movers, aligning/ balancing/ adjusting of alternators during re-installation and performance of brush seat and slip ring film re-establishing period during load test.
.