N4523A25R1107 - Maintenance, Repair, and Preservation of YTT-10
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N4523A25R1107
- Agency
-
Naval Supply Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Supply Systems Command seeks contractors to perform maintenance, repair, and preservation services on the YTT-10 vessel under solicitation N4523A25R1107. The scope of work requires contractors to coordinate with the Contracting Officer's Representative (COR) to deliver the vessel to their facility and perform required preservation, maintenance, and repair work in specified areas. The solicitation was originally posted on August 20, 2025, with proposal submissions due by October 10, 2025, following a deadline extension implemented through Amendment 0005. The procurement has undergone significant activity with six amendments issued between September 5 and October 7, 2025, including responses to contractor questions and clarifications. The work falls under NAICS code 336611 (Ship Building and Repairing) and PSC category J019 (Maintenance/Repair/Rebuild of Equipment - Ships, Small Craft, Pontoons, and Floating Docks).
This opportunity is designated as a Total Small Business set-aside, restricting competition to qualified small business entities. The YTT-10 is a substantial steel-hull vessel measuring 186 feet 6 inches in length and 40 feet 8 inches in width, with a draft of 10 feet 5 inches forward and 10 feet 4 inches aft. The vessel has a full displacement of 1,269 long tons and a light load displacement of 1,010 long tons, indicating the scale and complexity of the maintenance work required. The contractor will be responsible for transporting the vessel to their facility for the duration of the maintenance period. Market research was previously conducted under ID N4523A25R6007 before the PIID was changed to the current designation, suggesting this requirement has been under development for some time.
Notice text
8 versions
Update #8 · Latest ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025. Amendment 0002 Posted 9/15/2025. RFC Responses #3 posted 9/17. This addresses question #23. Amendment 0003 posted 9/23. Amendment 0004 posted 9/25. Amendment 0005 posted 9/26. Solicitation deadline extended to 10/10/2025. Amendment 0006 posted 10/7.
Update #7 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025. Amendment 0002 Posted 9/15/2025. RFC Responses #3 posted 9/17. This addresses question #23. Amendment 0003 posted 9/23. Amendment 0004 posted 9/25. Amendment 0005 posted 9/26. Solicitation deadline extended to 10/10/2025.
Update #6 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025. Amendment 0002 Posted 9/15/2025. RFC Responses #3 posted 9/17. This addresses question #23. Amendment 0003 posted 9/23. Amendment 0004 posted 9/25.
Update #5 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025. Amendment 0002 Posted 9/15/2025. RFC Responses #3 posted 9/17. This addresses question #23. Amendment 0003 posted 9/23.
Update #4 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025. Amendment 0002 Posted 9/15/2025.
Update #3 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107. Amendment 0001 Posted 9/5/2025
Update #2 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below. NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107.
Update #1 ·
YTT-10 has a length of 186 feet and 6 inches, width of 40 feet and 8 inches, draft of 10 feet and 5 inches FWD, 10 feet and 4 inches AFT, molded 10 feet and 6 inches, full displacement of 1,269 L tons, light load of 1,010 L Tons and a steel hull. Contractor is to coordinate with the COR to deliver the vessel (YTT-10) to the Contractor?s facility. Contractor is to perform preservation, maintenance and repair on required areas as outlined below.NOTE: Market Research was conducted for this requirement under the ID N4523A25R6007. The Procurement Instrument Identification Number (PIID) has been changed to N4523A25R1107.
Notice history
| Notice | Type | Posted |
|---|---|---|
| N4523A25R1107 - Maintenance, Repair, and Preservation of YTT-10 | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Maintenance, Repair, and Preservation of YON-325 | Naval Supply Systems Command | No set-aside | |
| Southwest regional maintenance center (SWRMC) submarine repair follow-on multiple award contract (MAC) indefinite delivery indefinite quantity (IDIQ) | Naval Sea Systems Command | Total Small Business | |
| Bravo Dive Boat 65DS1101 | Naval Supply Systems Command | Total Small Business | |
| On going maintenance | Naval Sea Systems Command | Total Small Business | |
| YRBM-25 Dry-Docking Selected Restricted Availability (DSRA) and Vessel Transportation | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity