N079--getinge SPS washer capital pacakge

THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. No formal solicitation document exists at this time. We are seeking information for market research purposes only. The Government will not pay for any information solicited.

The VHA Network Contracting Office 6 (NCO 6) is conducting a market survey to find qualified vendors who can provide the following items, manufactured by Getinge USA Sales LLC, for the Richmond VA Medical Center, 1201 Broad Rock Blvd., Richmond, VA 23249

Please see the attachment below for the list of items;

ITEM NO. DESCRIPTION QUANTITY UNIT ESTIMATED

OR STOCK NO. UNIT COST

--------------------------------------------------------------------------------

AGS6840B2XX42

22C 1 4-Bay 8668 AGS, 4 Washers, 2-Cart

Loading and Unloading Conveyors,

Pull-out Service Frame, 208V, Split

Rail 1 EA

ZSUS6642-I-AG

GSARC 2 AGS Conveyor (installation and

connections) 2 EA

ZSUS6638-I-AG

GS2130 3 Install 86-Series AGS System - Model

21 or 30 1 EA

T3DS2TDNS52NN

NC 4 86 Turbo: Steam 208V with AGS v2.0

Automation the Getinge S-8668T is

part of the 86-series of washer

disinfector targeting the Hospital

Segment where there is a need for the

highest throughput of a large variety

of reprocessed goods, such as surgical

instruments, utensils and

sterilization containers etc. Getinge

S-8668T offers a smarter process;

using the multitasking capability to

reduce the non-productive time that

enables the most effective process in

any given application. Getinge S-8668T

model# 8T3DS2TDNS52NNC includes: 3

dosing pumps, double doors, painted

steel frame, steam heating, 208V 3+PE

60Hz power supply, top connections, Di

water valve, detergent flow monitoring,

drain cooling, air barrier, built in

scanner for bar codes, USB storage,

AGS v2.0, disinfection phase time and

temperature, and detergent containers. 4 EA

6002123401 5 CONDENSATE COOLING KIT for S-8668T 4 EA

6001000501 6 3-Level Wash Cart, 8668/88T/CM320,

with removable shelves and spray arms,

integrated spray arm blocking plates

and prepared for up to six connections

for cannula instruments 4 EA

503185000 7 4-Level Wash Cart, 8668/88T/CM320,

with removable shelves and spray arms,

integrated spray arm blocking plates

and prepared for up to six connections

for cannula instruments Catalog #:

503185000 4 EA

6001483301 8 Wash Cart Kit, Automation 2.0 8 EA

6020720171 9 SMART Transport Trolley for

8666/8668/88T/CM320 Washers 6 EA

ZSUS6612-I-86

666 10 Install 86-Series

Washer/Disinfector *Previous catalog

#6612-I-8666 Catalog #:

ZSUS6612-I-8666 4 EA

RC-002-CTOM-2

2LH2L. 11 86-Series/88-Turbo/CM320

Free-Standing Return Conveyor System

The Getinge Free-Standing Return

Conveyor (RC) is a fully automated

transport system for returning empty

wash carts from the clean side, back

to the soiled side to be reloaded. The

clean-side conveyor module is separate

from the soiled-side conveyor. Each

conveyor module will be integrated

with a pass-through single-window

hatch; or an interlocking 2-window

pass-through chamber that penetrates

the barrier wall, to produce a

hygienic return transfer system. The

clean and soiled side conveyors are

modular, comprised of conveyor

sections that can handle 1 to 7 wash

carts on each side. These can be

combined to provide maximum flexibility

to hold from 2 wash carts up to 14

total wash carts. The Getinge RC

features power rollers for positive

transport of heavy loads without

drifting. Designed to work with the

8666; 8668; 88 Turbo; and CM320 wash

carts. Single Electrical Supply:

100-240 VAC, 50/60 Cycle,

Single-Phase, 20 Amps. Previous Part

Number: RC-2LH2L Digit-4 specifies

capacity of clean-side conveyor

Digit-5 specifies LH or RH service

access This model includes the PT

Hatch window Digit-7 specifies

capacity of soiled-side conveyor

storage Digit-8 specifies LH or RH

service access Catalog #:

RC-002-CTOM-2LH2L 1 EA

ZSUS24412-I-F

FSCPTW 12 Install Free-Standing Conveyor with

Pass-Through Window Catalog #:

ZSUS24412-I-FSCPTW 1 EA

TRIM 13 Custom Stainless-Steel Trim around

AGS Catalog #: TRIM 1 EA

Clinical Salient Characteristics

Ergonomic design with drive support for easy loading and unloading of wash carts.

The only automation system compatible with 86 series washer disinfectors, with a single robot unloading system or a single robot loading system and nothing permanently residing in front of the washer.

Compact, space-saving design with no conveyers blocking the front of the washer-disinfectors for manual loading of wash carts and system redundancy

Modular design allows for maximum flexibility in system layout and design with conveyors long enough to accommodate up to 9 wash carts.

Easily expandable to meet future needs by adding on washer-disinfectors, shuttle and/or conveyors.

Silent operation and very low energy consumption rollers only run when in contact with the wash cart.

Easy-to-clean with unique removable drive system components that do not require the use of tools.

Safe operation with AGS shuttle protected by a safety clutch and moderate movement of 0,2 m/s.

Lightweight and rigid AGS framework in stainless steel SS EN 1.4301(304).

Rigid conveyors and designed to hold up to 163 kg (360 lbs.) per wash cart, manufactured with stainless steel SS EN 1.4301 2G (304 2G) electro polished for maximum hygiene safety and easy to keep clean.

Exceptionally user-friendly operator interface with 10 color touchscreen for easy configuration and display of system status. The display is interactive and will change colors to display the actual status of the washer-disinfector in the AGS.

Fully molded 60 mm EPDM wheels with highest wear resistance to transport wash carts, driven by independent 24VDC/40W motors for each drive shaft.

All conveyors prepared for drain with slope design and delivered with removable bottom plug.

Docking blocks for conveyors prepared for the SMART 2.0 transport trolley for safe and ergonomic transfer of wash carts to conveyors.

Air barrier separation Improved air barrier to separate soiled and clean side and reduces the airflow and support to maintain pressure difference between departments (soiled/clean).

86 Series Clinical Salient Characteristics

The only washer to offer a chamber size equal to 12.3 cubic feet.

The only washer disinfector to offer a wash program of 30 min that was validated to meet ISO 15883-5 Annex N Cleaning Requirements.

The only washer disinfector to offer a wash rack size equal to 25.5 X 31.5.

The only washer disinfector able to be automated with AGS option with a single robot unloading system or a single robot loading system and nothing permanently residing in front of the washer.

The only control system to use exclusive BPLC software system.

The only washer offering traps, filters, spray arms and spray arm tips within the washer which can be removable by hand,

No tools required.

Easy to clean.

The only washer with shelves for all wash racks which are adjustable without tools.

The wash rack must provide the ability to process 12 typical trays found in the US sized 20 L x 10.3 W x 3.5 H or 15 DIN trays each full wash cycle.

All instrument trays must rest fully on the wash rack without any protrusion over the wash rack measurements.

The spray arms for the wash rack must be removable by hand, no tools necessary for easy cleaning.

Easy to clean rotary spray arms with removable tip on the top and bottom of the chamber as well as in between each level of the wash cart to allow water to reach all surfaces that need to be cleaned.

The only washer which will achieve intermediate level thermal disinfection as defined by the FDA Guidance Document for Washer Disinfectors (CDRH Feb 7TH 2002) using 194 degrees Fahrenheit for a minute.

The only washer to offer accessories available to allow for reconfiguring the standard wash carts to clean cannulated or lumen instruments without needing to purchase an additional cart or use of tools.

Wash carts with removable spray arms and shelves that can adapt to different load heights and incorporate accessories for cleaning lumen/cannulated/laparo scopic instruments.

The only washer with wash racks including integral wheels for ergonomic loading/unloading.

The only washer compatible with T-DOC and Getinge Online remote diagnostic system.

Low pressure, high volume flow wash designed to hydrate the load and effectively remove the soil without disturbing or damaging the instruments.

Process Report options with Network Storage generating reports in PDF format and Network Printing for printout of process reports.

larger chamber capacity allows you to clean more instruments in a shorter period of time due to their higher capacity.

Intuitive CENTRIC user-interface : large , high resolution, color touch screens. Easy to Use Touchscreen Interface controls that allows operator to see machine status from a distance and provides easy to understand help in resolving problems. The 7 touchscreen display is delivered as standard on both clean and soiled side.

Monitors and records all cycle performance data, and can be viewed remotely utilizing Getinge Online

The ability to communicate and export information to third party instrument tracking systems

Unique heat exchanger that pre-heats the drying air and also serves as a con denser for the outgoing air. This energy-saving process means shorter drying times and reduced energy consumption.

Integral process monitoring system that monitors key cycle parameters and inte gral machine functions alerting the operator to any deviations or issues with any of the parameters. Error code alert is accomplished with both a visual and volume controlled audible alarm.

This is a Brand Name request.

All interested parties should respond, in writing via email to Ronnie.Gregory@va.gov. No telephone inquiries will be accepted. In response, please include the following:

Company/individual name,

Address,

Point of contact with phone number

Information describing your interest,

Indicate FSS/GSA contract number or Open Market, as applicable

FSS Category you qualify for

Tax ID number

DUNS number

Capabilities statement

Company Socio-Economic SIZE (example large, small, SDVOSB, VOSB, WOSB etc.)

If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov).

The NAICS 339112 is applicable to this acquisition; with a size standard of 1000 Employees.

Interested firms are reminded that in accordance with FAR 4.1201(a) Prospective contractors shall complete electronic annual representations and certifications at the System for Award Management (SAM) as a part of required registration in conjunction with FAR 4.1102(a) that states, Prospective contractors shall be registered in the (SAM) database prior to award of a contract or agreement. Therefore, due to time constraints, vendors must be registered in System for Award Management (SAM) at http://www.sam.gov to be considered for an award.

Your response is required by 12:00 Noon EST on March 4, 2020.