Conformal Printed Antennas for Missile and Weapon Composite Airframes
Open Pre-Solicitation Posted
- Solicitation number
- DON27TZ02-NV014
- Agency
-
Office of Naval Research
Secretary of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Timothy Ransom timothy.c.ransom2.civ@us.navy.mil
- Deborah VanVechten deborah.vanvechten.civ@us.navy.mil
- Greg Ruderman gregory.a.ruderman.civ@us.navy.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Office of Naval Research, within the Department of the Navy, is preparing to procure STTR Phase I research and development for conformal printed antennas on missile, weapon, and aircraft composite airframes, with a due date of January 6, 2027. The opportunity is set aside for Total Small Business. The objective is to develop and demonstrate printed or conformal antennas and circuitry on small-diameter, high-curvature carbon-fiber substrates, addressing the coupled electromagnetic, structural, and environmental design problem with integrated environmental protection. The source identifies the parasitic mass, parasitic volume, and cable signal loss of the conventional architecture of discrete antenna elements on brackets inside separate radomes as the problem to solve. Antenna functions in scope include GPS (including anti-jam), command and control, telemetry, datalink, and seeker functions. The Department is developing low-cost counter-UAS effectors in 40 mm, 70 mm, and 5-inch diameters, where in-flight guidance updates continue until the seeker detects the threat UAS, and printed antennas and circuitry reduce mass. Keywords include aerosol-jet and inkjet printing, direct-write deposition, rain erosion, and qualification of printed electronics on composites. The notice is classified as not ITAR-controlled and requires CMMC Level 2 (Self). It carries NAICS 541715 and PSC AC12, and it was posted November 4, 2026.
Notice text
DoD STTR topic DON27TZ02-NV014
Component: NAVY
Command: ONR
Phase: STTR Phase I
Technology Areas: None
Focus Areas: Integrated Network Systems-of-Systems; Integrated Sensing and Cyber; Microelectronics
Keywords: printed electronics; aerosol-jet printing; inkjet printing; direct-write deposition; multi-material printing; printed antennas; conformal antennas; carbon fiber composite; composite motor case; conformal coating; environmental protection; rain erosion; GPS antenna; Global Navigation Satellite System (GNSS); Controlled Reception Pattern Antenna (CRPA); satellite communications (SATCOM); telemetry antenna; tactical rockets; missiles; weapons; qualification of printed electronics on composites
ITAR: No
CMMC: Level 2 (Self)
Objective:
Develop and demonstrate conformal printed antennas for Navy missile, weapon, or aircraft composite airframes, addressing the coupled electromagnetic, structural, and environmental design problem inherent to printing radiating elements on small-diameter, high-curvature carbon-fiber substrates with integrated environmental protection. In particular, the Department is developing a number of low-cost counter-UAS effectors in the 40 mm, 70 mm, and 5” diameters. In order to keep costs down, one approach is to provide in-flight guidance updates until the seeker can detect the threat UAS. To reduce mass, we are seeking technology for printed or conformal antennas and circuitry.
Description:
Rockets, missiles, aircraft, and tactical weapons are extremely weight constrained. Antennas for Global Positioning Systems (GPS) (including anti-jam), command and control, telemetry, datalink, and seeker functions must coexist with structural, thermal, environmental constraints on curved airframes. Conventional fabrication produces these antennas as discrete elements mounted on brackets inside separate radomes, connected to receivers via coaxial cables and connectors. This architecture imposes parasitic mass, parasitic volume, signal loss through cables and connectors, and long-term reliability degradation as connectors corrode and radomes delaminate over shipboard storage life.
Conformal printed antennas integrated directly onto composite airframe surfaces offer substantial advantages: reduced mass, reduced volume, eliminated cable and connector losses, and structural integration with the airframe itself. The technical challenge: printing radiating elements onto curved carbon-fiber substrates couples electromagnetic design with structural design, environmental protection, and the complex electrical interaction between printed conductors and the underlying conducting carbon-fiber substrate.
Multi-material printed electronics, particularly aerosol-jet and inkjet direct-write processes, have matured to where conductors, dielectrics, and substrates can be co-deposited into conformal structures with controlled electromagnetic properties. The unaddressed capability is the integrated design of printed antennas on airframe substrates, with environmental protection co-designed for operational survival.
The antennas shall be designed using direct-write printed electronics methods (aerosol-jet, inkjet, or comparable approaches) capable of multi-material co-deposition on curved composite substrates. Coating or environmental protection schemes shall be integrated into the design from the outset, with explicit treatment of electromagnetic transparency, loss, and detuning effects.
Phase I:
Define a concept for the target antenna application, including the conventional baseline being displaced and quantitative performance, cost, and lead-time targets. In conjunction with the Navy participants. identify a representative composite substrate and configuration with justification of diameter and curvature (preference for the 70 mm to 130 mm diameter range).Identify a coating or environmental protection scheme appropriate to the target application, with justification against the operational environment. Conduct joint research on the coupled electromagnetic-structural-environmental design problem, including initial design methodology, characterization of electromagnetic transparency and detuning effects of candidate coatings, and characterization of printed conductor performance on carbon-fiber composite substrates. Deliver a final report that includes technology base documentation, coating selection rationale and characterization, and baseline comparison; and a Phase II plan.
Phase II:
Develop the conformal printed antenna capability prototype and mature to TRL 6 on a representative configuration, including environmental qualification per relevant MIL-STDs on the coated configuration. Demonstrate fabrication and performance at relevant curvature, including documented print process control, inspection, yield characterization, and coating application. In conjunction with identified Navy transition program, demonstrate platform level integration and test, including (where feasible) captive carry, static fire, sled test, or flight demonstration. Document the path to qualified production, including supplier identification, equipment requirements, and cost and lead-time projections at production rate. Prepare a Phase III commercialization/transition plan.
Phase III:
Transition to the identified target Program of Record. Broader applications include Navy and Marine Corps strike weapons (PMA-242, PMA-201), air-to-air missiles (PMA-259), tactical rockets, small UAS (PMA-263), Marine ground-launched precision fires, and dismounted C4ISR antennas. Cross-service applications include Army PEO Missiles and Space, Air Force Armament Directorate, MDA, and Special Operations Command (SOCOM) antenna requirements on small-diameter platforms.
Commercial small UAS and advanced air mobility (conformal antennas on composite airframes); commercial space and small satellites (conformal antennas on composite stages and bus structures); automotive (conformal antennas for connected and autonomous vehicles); and consumer and industrial IoT. The qualification framework, including coating and protection, transfers to FAA-regulated aviation, commercial space, and other regulated markets where qualification of printed antennas on composites and other conductive substrates would provide weight and power advantages.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Computational Frameworks for the Development and Qualification of Additive Manufacturing-Tailored Wire Feedstock for Naval Directed Energy Deposition | Office of Naval Research | Total Small Business | |
| Wideband Antenna for RF Photonics Modules | Air Force Materiel Command | Total Small Business | |
| Compact Unmanned Aerial System for Marine Species Monitoring | Office of Naval Research | Total Small Business | |
| Improved Ionosphere D-region Specification for High Frequency Propagation | Office of Naval Research | Total Small Business | |
| Photonic-Crystal Surface Emitting Lasers (PCSELS) in the Near-Infrared (NIR) | Office of Naval Research | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity