Milcon project P1022; aircraft paint complex at naval base coronado, SAN diego, CA
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- N6247319R1215
- Agency
-
Naval Facilities Engineering Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 236220 Commercial and Institutional Building Construction
- Place of performance
- Naval Base Coronado, California San Diego Ca 92135 USA
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation requests proposals for design and construction services for an aircraft paint complex at Naval Base Coronado in San Diego, California. The Navy seeks to acquire design and construction of two new buildings including a paint facility with four divisible bays and a corrosion facility with two bays, along with a new wash rack and heat resistant aircraft access ramp. Proposals will be evaluated under a two-phase design-build selection process considering technical approach, experience, past performance, safety, technical solution, energy reduction, small business utilization, and price. A maximum of five offerors will be invited to submit phase two proposals by October 7, 2019.
The North American Industry Classification System code is 236220 for construction of new commercial structures, with an annual size standard of $36.5 million. The estimated value for design and construction services ranges from $25-100 million to be provided over an unspecified period of performance at the Naval Base Coronado facility located at North Island Naval Air Station in San Diego, California. There is no set-aside designation for this procurement.
Notice text
2 versions
Update #2 · Latest ·
A Market Survey was conducted by Sources Sought Announcement on 10 August 2018 posted on NECO/ FedbizOpps seeking availability and capability of qualified and eligible businesses in the Small Business Programs. As a result of the market research analysis, the Government did not find a minimum of two (2) verified, capable, small business contractors in any socio-economic program available to perform the design and construction services for this project. On 15 April 2019, the Small Business Program Office concurred with the following unrestricted, full and open competition determination.
THIS IS AN UNRESTRICTED COMPETITIVE PROCUREMENT IN ACCORDANCE WITH FAR SUBPART 6.1 FULL AND OPEN COMPETITION. This procurement will use the two-phase design-build selection procedures and consists of one (1) solicitation covering both phases. Source Selection procedures will be used with the intent to award a firm-fixed price construction contract to the responsible Offeror whose proposal, conforming to the Request for Proposal (RFP), is the most advantageous and offers the best value to the Government.
The work to be acquired under this solicitation is for design and construction of a state of the art Paint and Corrosion Control Facilities to include provision of two new buildings, a paint facility and a corrosion facility, a new wash rack and a heat resistant aircraft access ramp. The buildings will consist of high bay areas sized similarly to existing facilities on site and designed to handle the aircraft requirements at Fleet Readiness Center Southwest (FRCSW) North Island. The facility is primarily intended to handle an entire aircraft MV22, F-18, and H-60 helicopter corrosion issues and repainting. The Paint Building will consist of four bays, divisible by retracting panels to eight bays. The corrosion facility shall consist shall consist of two (2) bays that are not divisible. The Base Proposal Item includes all bonds, management, labor, materials, incidental engineering, equipment, transportation, supervision, and incidental related work to provide design, construction, procurement, and installation services for Construction of an Aircraft Paint Complex at Naval Base Coronado, San Diego, California.
The North American Industry Classification System (NAICS) code is 236220, and the annual size standard is $39.5 million. The estimated price range for design and construction is between $25,000,000 and
$100,000,000.
The Government intends to evaluate proposals without discussions. Selection for award will be based on evaluation of the following: Phase I: Factor 1 – Technical Approach, Factor 2 – Experience, Factor 3 – Past Performance; Phase II: Factor 4 –Safety, Factor 5 – Technical Solution, Factor 6 – Energy Design Reduction, Factor 7 – Small Business Utilization, Factor 8 – Price.
The Phase I evaluation will result in a determination of the most highly qualified Offerors. These Offerors will be requested to submit a Phase II proposal. A maximum of five (5) Offerors will be selected to submit a Phase II proposal.
THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. The Phase I RFP will be posted on the Federal Business Opportunities website at https://www.fbo.gov/on or around 05 September 2019. No hard copies will be provided. IT IS THE CONTRACTORS RESPONSIBILITY TO CHECK THE WEBSITE PERIODICALLY FOR ANY AMENDMENTS TO THE SOLICITATION.
Prospective Offerors MUST register themselves on the website. Plan holders lists will not be faxed and will be available only at the website listed above.
A pre-proposal conference for Phase I is planned but no site visit will occur until Phase II.
Update #1 ·
A Market Survey was conducted by Sources Sought Announcement on 10 August 2018 posted on NECO/ FedbizOpps seeking availability and capability of qualified and eligible businesses in the Small Business Programs. As a result of the market research analysis, the Government did not find a minimum of two (2) verified, capable, small business contractors in any socio-economic program available to perform the design and construction services for this project. On 15 April 2019, the Small Business Program Office concurred with the following unrestricted, full and open competition determination.
THIS IS AN UNRESTRICTED COMPETITIVE PROCUREMENT IN ACCORDANCE WITH FAR SUBPART 6.1 FULL AND OPEN COMPETITION. This procurement will use the two-phase design-build selection procedures and consists of one (1) solicitation covering both phases. Source Selection procedures will be used with the intent to award a firm-fixed price construction contract to the responsible Offeror whose proposal, conforming to the Request for Proposal (RFP), is the most advantageous and offers the best value to the Government.
The work to be acquired under this solicitation is for design and construction of a state of the art Paint and Corrosion Control Facilities to include provision of two new buildings, a paint facility and a corrosion facility, a new wash rack and a heat resistant aircraft access ramp. The buildings will consist of high bay areas sized similarly to existing facilities on site and designed to handle the aircraft requirements at Fleet Readiness Center Southwest (FRCSW) North Island. The facility is primarily intended to handle an entire aircraft MV22, F-18, and H-60 helicopter corrosion issues and repainting. The Paint Building will consist of four bays, divisible by retracting panels to eight bays. The corrosion facility shall consist shall consist of two (2) bays that are not divisible. The Base Proposal Item includes all bonds, management, labor, materials, incidental engineering, equipment, transportation, supervision, and incidental related work to provide design, construction, procurement, and installation services for Construction of an Aircraft Paint Complex at Naval Base Coronado, San Diego, California.
The North American Industry Classification System (NAICS) code is 236220, and the annual size standard is $36.5 million. The estimated price range for design and construction is between $25,000,000 and
$100,000,000.
The Government intends to evaluate proposals without discussions. Selection for award will be based on evaluation of the following: Phase I: Factor 1 – Technical Approach, Factor 2 – Experience, Factor 3 – Past Performance; Phase II: Factor 4 –Safety, Factor 5 – Technical Solution, Factor 6 – Energy Design Reduction, Factor 7 – Small Business Utilization, Factor 8 – Price.
The Phase I evaluation will result in a determination of the most highly qualified Offerors. These Offerors will be requested to submit a Phase II proposal. A maximum of five (5) Offerors will be selected to submit a Phase II proposal.
THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. The Phase I RFP will be posted on the Federal Business Opportunities website at https://www.fbo.gov/on or around 30 August 2019. No hard copies will be provided. IT IS THE CONTRACTORS RESPONSIBILITY TO CHECK THE WEBSITE PERIODICALLY FOR ANY AMENDMENTS TO THE SOLICITATION.
Prospective Offerors MUST register themselves on the website. Plan holders lists will not be faxed and will be available only at the website listed above.
A pre-proposal conference for Phase I is planned but no site visit will occur until Phase II.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| Milcon project P1022; aircraft paint complex at naval base coronado, SAN diego, CA | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| P-271, E-130J Main Operating and Training Base, MCAS Cherry Point, NC | Naval Facilities Engineering Command | No set-aside | |
| Navy Child Development Centers (CDC) Industrialized Construction (IC) Projects via Other Transaction Authority (10 U.S.C. § 2808a) | Naval Facilities Engineering Command | No set-aside | |
| 163rd CE Flooring & Painting 2272 | Army National Guard | Total Small Business | |
| General Construction Job Order Contract (JOC) | Naval Information Warfare Systems Command | Competitive 8(a) |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity