Manufacturing Qualification Requirements (MQR) for Commodity Critical Safety and Critical Application Items (848 SCMG MQR)
Open Pre-Solicitation Posted
- Solicitation number
- 848_SCMG_MQR_17_AUG_2020
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336413 Other Aircraft Parts and Auxiliary Equipment Manufacturing
- PSC
- Not on record
- Place of performance
- Tinker AFB, Oklahoma 73145, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force Materiel Command Air Force Sustainment Center is establishing manufacturing qualification requirements for critical safety and critical application items used on multiple C-135 aircraft variants operated by the U.S. Air Force. Potential vendors seeking to become approved sources for manufacturing these commodity items must submit a Source Approval Request (SAR) package that complies with Air Force Material Command Instruction 23-113 and the 848 SCMG MQR document. The procurement covers a diverse range of structural components, instruments, and accessory items including airframe structures, doors, panels, fairings, fuel tanks, cowlings, and various auxiliary systems. Compliance with Federal Acquisition Regulations and the specific qualification standards outlined in the 848 SCMG MQR Master Item List serves as the primary evaluation criterion for potential suppliers. The due date for this pre-solicitation notice is April 11, 2028, providing vendors with an extended timeline to prepare their qualification packages and submissions.
This procurement carries no set-aside designation, making it open to all qualified manufacturers. The master item list encompasses over 600 component entries across multiple C-135 variants including KC-135, RC-135, WC-135, TC-135, NC-135, and EC-135 models, with items managed by the 848th Supply Chain Management Group at Tinker Air Force Base in Oklahoma. Each item in the master list is identified by National Stock Number, Federal Supply Class codes, nomenclature, and relevant aircraft model designations to facilitate accurate qualification and procurement. The most recently updated master item list was published in March 2026, reflecting current requirements and inventory needs. No specific contract award value or incumbent contractor information is disclosed in this pre-solicitation notice, as the opportunity is structured to establish qualification criteria rather than award a single contract for all listed items.
Notice text
This information is posted in order to publicize the establishment of manufacturing qualification requirements (MQRs) for the items listed in the “848 SCMG Master Item List July 2020.pdf” attached in this posting. Pursuant to Federal Acquisition Regulations (FARs), potential vendors wishing to become qualified as an approved source of supply for manufacturing items specified in the subject Master Item List must submit a Source Approval Request (SAR) package. Air Force Material Command Instruction 23-113, Material Management, Pre-award Qualification of New or Additional Parts, Sources and the Use of the Source Approval Request (SAR) and the 848 SCMG MQR document serve as the basis for creating and submitting a SAR package. AFMCI 23-113 implements FAR requirements and Air Force Policy and procedures. The 848 SCMG MQR is applicable to only manufacturing SAR packages and references relevant sections of AFMCI 23-113 where needed and serves to clarify requirements the proposed offeror (i.e., potential supplier) must satisfy in order to obtain source approval to manufacture a commodity item for a specific application. The 848 SCMG MQR covers a variety of different commodity items managed by the 848th Supply Chain Management Group, 448th Supply Chain Management Wing, under the Air Force Sustainment Center. Commodity items managed by the 848 SCMG span a number of different categories to include structures, instruments, and accessory items used on a number of major aircraft operated by the US Air Force. The 848 SCMG Master Item List provides each item's: National Stock Number; Nomenclature; managing Group; managing Squadron; Mission, Design, Series (MDS); Type, Model, Series (TMS); and Acquisition Method Suffix Code (AMSC) data for each item.
Notes:
- AMSC are limited to: C, D, K, M, N, P, Q, R, S, and V.
- In general, “MDS” is the combination of numbers/letters used to describe different aircraft and “TMS” is the number/letter combinations used for equipment, engines, missiles, etc.
Comments and suggestions regarding this MQR are welcome. If industry has suggestions, to include clarifications or changes to the specified requirements, please contact the 848 SCMG through the email provided.
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| AIRCRAFT TURBINE_End_Item_F15_NSN_1660016625982_PN_2222250-4 | Aviation | No set-aside | |
| MQR_Mar_ | Air Force Materiel Command | No set-aside | |
| COMPUTER, FLIGHT CON_End_Item_KC-46_NSN_6615016536681KT_PN_822-1261-102 | Aviation | No set-aside | |
| PRINTED WIRING BOARD_End_Item_KC-46_NSN_5998016525319KT _PN_285T0458-203 | Aviation | No set-aside | |
| Solicitation: 415 scms strategic MAC IDIQ contract | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity