Maintenace, Repair, and Preservation of YC-1589 and YC-1634

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation of two (2) Open Lighter Barges (YC-1589 and YC-1634).

The YC-1589 characteristics are steel hull material, 35 years old, 110 FT length, 32 FT width, 8 FT draft, 694 tons full displacement and 144 tons light load. The YC-1634 characteristics are steel hull material, 32 years old, 110 FT length, 32 FT width, 8 FT draft, 694 tons full displacement, and 144 tons light load.

The Contractors facility must possess the capability of accommodating two (2) Open Lighter Barges (YC-1589 and YC-1634) with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.

Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer?s Representative (COR) to deliver the vessel to the Contractor?s facility. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Remove/install existing port and starboard rubber fender. Accomplish required inspections sweep blast and reinstall. Accomplish air test on steel bumper. Remove main deck hand rail stanchions base hinges. Blast and preserve all exterior surfaces of the vessel. Shift the vessel on the blocks to achieve 100 percent preservation of underwater hull. Remove existing and install new zinc anodes. Hull and main deck require ultrasonic measurement of plating thickness and repair of areas below minimum thickness. Vessel requires inspection for damage and deterioration (hull, main deck, and tanks/voids?plating and framing). Apply new non-skid system to main deck. Open, clean, inspect, and test Quantity 6 tank/void. Accomplish partial preservation of Quantity 6 EA tanks. Undock the vessel. Verify vessel drawings and provide to the government, redline drawings to reflect actual conditions of this vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR.

The expected Period of Performance is scheduled to be 6 July 2023 to 26 October 2023.

This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,250 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.