LGC 25-3-14 Weld Ventilation B2
Closed Pre-Solicitation Posted
- Solicitation number
- W519TC26QAT01
- Agency
-
ACC Rock Island
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 238190 Other Foundation, Structure, and Building Exterior Contractors
- Place of performance
- Rock Island, Illinois 61299, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Contracting Command-Rock Island (ACC-RI) is seeking qualified sources for the procurement of LGC 25-3-14 Weld Ventilation B2, an ambient weld ventilation system to be installed at Rock Island Arsenal in support of the Joint Manufacturing and Technology Center (JMTC). This is a sources sought notice for market research purposes only and does not constitute a Request for Proposal, Request for Quotation, or invitation for bid. The system specification requires approximately 22 standalone filtering units, each with 5,000 CFM capability and a single 3-horsepower motor, along with a separate 25-horsepower blower powering a vertical downflow dust collector. Vendors must demonstrate at least three years of experience manufacturing this type of equipment and must provide specific manufacturer and model information for the equipment being offered. The deadline for submitting capability statements is 11:00 A.M. CST on April 20, 2026, to angel.j.traman.civ@army.mil, with all responses to be considered during the development of the finalized acquisition strategy and resulting solicitation.
This procurement carries no set-aside designation and is unrestricted by size standard classification. No incumbent contractor is identified in the notice, and no award value or budget range is disclosed in the sources sought documentation. Interested vendors must submit comprehensive capability statements that include their size standard classification, DUNS Number, EUI, and Cage Code, along with supporting documentation demonstrating their capability to perform the complete requirement. The system is designed to service up to 14 weld booths with capacity for 10 air exchanges per hour in a bay measuring approximately 80 feet wide by 240 feet long, with heights ranging from 18 feet to 35 feet in the high-bay peaked roof area. The contractor will be responsible for site inspections, design verification, shipping, installation supervision, performance testing, and providing training for multiple personnel, with service support including on-site response within 48 hours and stocked maintenance parts during normal business hours.
Notice text
Sources Sought:
Title: LGC 25-3-14 Weld Ventilation B2, RIA-JMTC at Rock Island Arsenal
Product Service Code: 3695
NAICS Code: 238190
The purpose of this notice is to gain knowledge of potential qualified sources for the purchase of LGC 25-3-14 Weld Ventilation B2 at Rock Island Arsenal in support of the Joint Manufacturing and Technology Center (JMTC). The U.S. Army Contracting Command-Rock Island (ACC-RI) is seeking sources only.
This is NOT a Request for Proposal (RFP), Request for Quotation (RFQ), or an invitation for bid, nor does its issuance obligate or restrict the Government to an eventual acquisition. The Government may use all information received from this RFI for planning purposes and to identify potential sources as part of market research. The Government does not intend to award a contract based on responses to this RFI nor reimburse vendors for the preparation of any information submitted or Government use of such information. Responders are solely responsible for all expenses associated with responding to this RFI. ACCRI will not pay for information received in response to this RFI.
ACC-RI intends to consider all capability statements when developing its finalized acquisition strategy and resulting solicitation(s).
Please submit all capability statements as outlined below by 11:00 A.M. CST on April 20, 2026, by email to angel.j.traman.civ@army.mil.
Please provide a capability statement to include supporting information and documents to support the vendor’s ability to perform this requirement in accordance with Attachment 0001 – DRAFT Purchase Description. The capability statement should clearly address the following areas:
1. Vendor’s Size Standard, DUNS Number, EUI, Cage Code
2. Does the vendor have at least 3 years of experience manufacturing this equipment.
3. What manufacturer and model number would be offered for this equipment.
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Solicitation -- Blower, Air Barrier | Department of the Army | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity